What's New

Book Author(s)
Robert Peczkowski
Review Author
Paul Mahoney
Published on
Company
Mushroom Model Publications - MMP Books
MSRP
$35.00

With the recent releases (and re-releases) of a few Me 410 kits, MMP’s book on the aircraft is quite timely.

The first 10 (out of 120) pages of this book describe the rather convoluted developmental history of the Messerschmitt Me 410, actually starting with the Me 210. The blurred lines between what constitutes a late Me 210 and an early Me 410 are well described. In fact, as the lineage is so confusing, MMP provides a good flowchart to clear it all up. At the end of this section are a brief few paragraphs describing the remaining two surviving examples of the aircraft (photos of these appear later).

Review Author
David Wrinkle
Published on
Company
Minicraft Model Kits
Scale
1/48
MSRP
$29.99

The Beechcraft Bonanza V-tail is one of the sleekest general aviation designs out there, and it’s still flying today. I wish I would have had the chance to log some hours in one before I gave up flying. The Bonanza was introduced in 1947 and is still produced today, although the V-tail design was retired in 1982.

Review Author
Tom Pope
Published on
Company
Round 2 Models
Scale
1/72
MSRP
$24.99

Introduction

By 1999, a human colony had been built on the Moon (you remember, right?). Moonbase Alpha safeguarded all the nuclear waste shipped from Earth, and carried out research. Then, on September 13, 1999, disaster struck when the nuclear waste exploded in a chain reaction, and the Moon was blasted out of Earth's orbit, into deep space. Thus began the adventures of Space:1999. Space:1999 was a British produced science fiction television series that aired from late 1975 to early 1977, and for us science fiction fans, there was nothing else like it on TV at the time. The workhorse of Moonbase Alpha was the Eagle spacecraft. Eagle spacecraft were cleverly designed, modular utility ships (like the Huey helicopters of the day), and were used for work tasks and in various configurations to transport personnel and cargo around the Moon and the planets the Moonbase Alpha crew came across in their travels.

Review Author
Dave Morrissette
Published on
Company
Zoukei-Mura
Scale
1/48
MSRP
$48.00

When we left off at the end of part 1, the gun bays, cockpits and main airframe were done, and we needed to cover the engines and prepare the airframe for painting. Moving on to this round of the build, the sides and tops covering the engines are added. This is easier on the 1/48 kit as there are fewer parts, only 7 versus the 11 found on the 1/32 scale kit. In either case, hiding the engine below the covers is difficult, if only because it is so well done. The back is added along with the air scoops, top cover and a little putty, at which point we are done with the aft of the plane.

Review Author
Walt Fink
Published on
Company
Platz
Scale
1/72
MSRP
$25.00

Retired from active service in 2006, The F-1 was the JASDF’s first Japanese-designed and -manufactured supersonic fighter, and was essentially the same airframe as the two-seat Mitsubishi T-2 trainer, but had a solid “hood” in place of the second canopy, along with assorted weapons capabilities and internal differences. The similarity in appearance to the SEPECAT Jaguar has some merit, though Mitsubishi’s official position states that the only items it has in common with the Jag are its engines.

Platz continues its line of JASDF and JMSDF subjects with this new release. I’ve never built a Platz kit which hasn’t been excellent with beautiful engraved detail and great fit, and this one’s recessed panel lines and thorough detailing throughout was no exception.

Review Author
William Carrell
Published on
Company
Scale Aircraft Conversions
Scale
1/32
MSRP
$17.95

Scale Aircraft Conversions continues to release high quality aftermarket gear sets and this one is no exception. This is a 3 piece white metal kit that utilizes a few of the actual kit parts. Once removed from the blister pack one cannot help notice how “weighty” The SAC gear is. Additionally, one sees the added detail with the better relief and how it will be much more realistic upon painting.

The kit provided gear is actually not too bad. Biggest problem I see is that the main gear is molded in 2 parts and requires a supplied pre-formed wire insert to ensure it can hold the load of the kit. It construction suggestes the kit supplied gear is going to require considerable work to hide seams after being assembled. You will NOT have that problem with the high quality SAC white metal kit. With little trimming and polishing work it is ready to install.

Review Author
William Carrell
Published on
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$14.95

Having a few of these kits on the shelf and recently reviewing the kits most recent release I thought I could provide a good perspective on this offering from SAC.

Scale Aircraft Conversions continues to release high quality aftermarket gear sets and this one is no exception. The 4 piece white metal kit is supplied in the standard blister pack and one can immediately see it is far superior to the kit supplied gear in detail. Upon removal, the gear is has some weight to it so it will be sturdy.

The kit supplied gear was adequate, but required considerable work as the halves are not properly aligned to one another. Additionally there are a number of sink holes and ejector pin marks that are quite time consuming to fix. The SAC gear kit is soooooooooo much better in quality and will require much less effort to present an accurate presentation.

Review Author
Bill O'Malley
Published on
Company
Plusmodel
Scale
1/35
MSRP
$22.00

This is another in the Cushman Scooter series of models recently released by Plus Model.

Cushman made 4,734 airborne scooters for the military beginning in 1944. The rugged, simple Model 53 could travel through water, climb a 25 percent grade and had a range of approximately 100 miles. Some scooters had a hitch to pull a utility cart. This version of the Cushman airborne scooter was configured to carry a sidecar with either an additional seat or a utility bin.

Kit Contents

The kit has 21 light gray resin parts, one clear headlamp, one piece of wire, four photoetch pieces, and one detail sheet. The instructions include three color schemes – U.S. Navy (gray), U.S. Army (olive drab) and Airfield Service (deep yellow).

The resin is fairly soft and all of the parts have casting blocks and flash that must be removed. The parts do have good detail for their small size.

Review Author
Greg Wise
Published on
Company
Wingnut Wings, Ltd
Scale
1/32
MSRP
$69.00

History Brief

The dreaded Fokker E.1 was the first fighter aircraft to enter service with the German Luftwaffe in World War I. When it arrived at the front in mid-1915, it set in motion a time known as the "Fokker Scourge," in which the E.1 and its lineal Eindecker siblings achieved air superiority over the Western Front.

The Product

My sample arrived in a higher-end box, commonly associated with quality model kits. The box top features a beautiful color print with the famous Wingnut Wings name found in the upper, right-hand corner. Inside the box, I found the parts well protected in the typical poly bags. The parts themselves were flawless and flash-free, featuring delicate detailing. Also included is a photo-etch fret; an unbelievable color instruction booklet printed on glossy paper, featuring vintage photographs and five full-color plates; and finally, the beautiful decal sheet printed by Cartograf.

Review Author
David Wrinkle
Published on
Company
Quickboost
Scale
1/48
MSRP
$6.50

Upfront, I want to thank Aires and Quickboost for providing these fine aftermarket bits for our beloved models and to the IPMS USA a big thank you for allowing me to review this Quickboost product.

Admittedly I am proud of the fact I love the stubby World War II fighter. The Rita, Buffalo and certainly the Grumman Wildcat. I have several in my stash including the Hobby Boss 1/48 wildcat and it’s a good looking kit. I snagged the Quickboost exhaust stubs for the wildcat before even looking at the plastic parts. In all honesty, when I finally looked at the original parts, I didn’t think you could improve on them. I was wrong! The original parts are well molded and due to the large diameter exhaust, even the kit parts have an open exhaust. NO need to drill out the opening. Well, where I think the Quickboost parts shine, is the fact the wall thickness is more in line with a scale thickness. The original kit parts are certainly way too thick.