What's New

Review Author
Jeff Leiby
Published on
Company
Round 2 Models
Scale
1/48
MSRP
$28.99

The Kits

The molds for these kits were originally produced by Impact in the early 60s as part of a series of British fighters that included the Bristol Bulldog, Fairey Flycatcher, Hawker Fury and the Gloster Gladiator. The molds have changed hands from Impact through Lifelike, Pyro and Lindberg and now are the property of Lindberg/Round 2. This double kit is a reissue by Lindberg Round 2 with improved instructions, one additional decal option per plane and two 36" lengths of rigging wire (not included in any of the previous issues).

Included in the box are:

Review Author
Jon Caldwell
Published on
Company
Academy Models
Scale
1/72
MSRP
$24.00

The first mockup of the F2H was actually completed before the end of WWII. A continuation of the FH-1 Phantom program, the F2H was a progressive step in the Navy’s effort to develop jet aircraft for carrier operation. The Banshee, as it was called, entered service in 1948, served in the Korean War, and wasn’t retired until 1961. It was also operational with the Canadian Navy until 1962.

Review Author
Damon Blair
Published on
Company
Master Model
Scale
1/72
MSRP
$7.50

Guns and pitot probes on most plastic model aircraft leave a lot to be desired. There is often a mold seam down the center of the guns or pitot probe. Another set of problems are that the same parts, once cleaned up, are usually oval shaped in diameter, and the guns do not have that proper hollowed look of a real gun barrel. In some scales, such as 1/72, it would be difficult if not impossible to drill out these plastic gun barrels and pitot tubes.

Master Model has solved this problem with an aftermarket kit for the A-1 Skyraider. This kit consists of thirteen metal parts which will allow for two different gun barrel configurations, and a pitot probe to replace the kit’s pitot probe. Each gun barrel is realistically hollow on the inside, with the thickness of the barrel in scale with the model. Master Model’s parts are not unique to a specific A-1 kit, but are compatible with any 1/72 scale A-1 Skyraider kit, no matter which variant it is.

Review Author
Dick Montgomery
Published on
Company
Cross & Cockade International
MSRP
$13.00

Cross & Cockade has released their 2018 calendar and it is quite an edition to one’s Man Cave. As in past years, you are advised to order your copy now, and not wait. There may be a limited supply of these calendars and you do not want to miss out because you waited until the supply ran out.

According to Roger Tisdale of Cross & Cockade, the profits from the sale of the 2018 Cross and Cockade International Calendar are once again going to assist in the upkeep of the British Air Services Memorial at the St-Omer airfield in northern France”. This is a very worthy cause and deserving of your support. One can check out the St-Omer Memorial.

Review Author
Pablo Bauleo
Published on
Company
Bloomsbury Publishing
MSRP
$60.00

The Battleship series is a yearly publication which includes historical research topics related to naval warfare. The Editor is John Jordan and each yearly edition has multiple authors.

The 2017 edition includes

Review Author
Floyd S. Werner Jr.
Published on
Company
Master Model
Scale
1/35
MSRP
$15.00

The Mi-24 Hind is one of the meanest attack helicopters on the battlefield. It is huge, ugly and spectacularly brutish. The Hind-D/E had a 12.7 YakB machine gun mounted in a turret under the nose. This gun was capable of carrying 1,470 rounds of 12.7mm ammunition and firing at a rate of 4,500 rounds a minute. This gun is a whole lot of whoop ass to go along with its brutish looks.

Master Model has started to release some helicopter armament systems in their turned metal barrel range. The third in the 1/35th scale series is the gun and DUAS Probe for the Mi-24D/E.

Book Author(s)
David Doyle
Review Author
Frank Landrus
Published on
Company
G-104 Press
MSRP
$25.00

David Doyle’s latest book is with a brand new publisher, G-104 Press. Founded by Scott and Kim Taylor of London, Ontario, this volume follows the Visual History format previously seen from David Doyle’s books from Ampersand. David Doyle has acquired the use of the former Ampersand format along with the inventory and website: http://www.AmpersandPubCo.com . This book is presented in landscape and includes 112 gloss pages. G-104 Press does not yet have a website, but they are planning on one. Presently, the book is sold through David Doyle’s website. Scott and Kim Taylor can be reached through their Thachweave Products webpage at thachweave.tripod.com where they sell some unique modeling products or you can often find them at IPMS and AMPS conventions.

Review Author
Mark Aldrich
Published on
Company
AFV Club
Scale
1/35
MSRP
$83.50

The U.S. Army accepted their first M109 in 1963. The M109 sported the short barrel (23 Caliber) 155mm M126 gun. Since 1963 the M109 has gone through a series of changes and upgrades. Most notable is the change to the longer barreled (39 Caliber) M185 gun on the M109A1 and the removal of the external floatation kit and addition of the external ammunition storage box on the M109A2.

The Israelis received their first 60 M109s in 1967. After years of boycotts, refusals, and subterfuge, the United States agreed to openly sell Israel much needed modern armored fighting vehicles. The only changes the IDF did to the original M109s were to add some hull mounted crew rails on the side and the conversion of some muzzle brakes to the Soltam version (probably for testing purposes).

Review Author
Bill O'Malley
Published on
Company
Eduard
Scale
1/48
MSRP
$7,395.00

Eduard has issued two resin radiators to upgrade the radiator in their SE.5a kit:

  • 648319 SE.5a Radiator – Hispano Suiza for 4 blade prop 1/48 $7.95
  • 648320 SE.5a Radiator – Hispano Suiza for 2 blade prop 1/48 $7.95

These radiators are for the Hispano-Suiza engine version of the SE.5a. The upgraded radiators include resin and photoetch parts with much finer detail than the kit parts.

Review Author
Ben Morton
Published on
Company
Kitty Hawk
Scale
1/48
MSRP
$63.99

Kitty Hawk Models has already released a 1/48th scale kit of the French Super Etendard. They are now gracing the shelves of your local hobby shop with an earlier version of that aircraft: the Dassault Etendard IVP/IVM. This model represents the maritime strike (IVM) or photo reconnaissance (IVP) version of the aircraft.

Etendard is the French word for standard or banner. For some historical perspective on the Dassault Etendard, I'd refer you to Air Vectors website. Air Vectors has a nice history of the type from the Etendard II through the Super Etendard, for your edification.