ICM has provided this great new release for review, in 1/48 scale model of the B-26B Marauder. This is based on the original release from a few months earlier this is the D-Day Anniversary version with addition ground and flight crew included.

• Eight grey Sprues
• One Clear Sprue
• One Decal sheet
• One Instruction guide including printed mask templates
• One instruction sheet for the figures
• Plus, one sprue of the Flight and Ground crew

The detail quality is excellent in every way with this kit, crisp and detailed molding has become the norm for ICM.

The assembly is quick and easy.

The assembly starts on the left-hand side of the main fuselage. The few ejector pin marks should be filled/cleaned up on both halves of the fuselage.

Stages 1 to 6 are the assembly of the interior parts of the left fuselage. Be careful with G17 and G26 as they are very fragile. No issues were found in these stages.

Adolf Hitler invaded Western Europe in May 1940. After breaking through the supposedly 'impenetrable' Ardennes, Erwin Rommel was at the forefront of the Wehrmacht's audacious drive through France. Rommel, who had no prior experience leading an armored division in combat, moved with such speed and nerve that he frequently surprised French units by arriving far earlier than expected.

Crossing the Meuse River, we follow Rommel—in what he referred to as 'practically a lightning Tour de France'—as he pushed through northern France to the English Channel. His spectacular victory at the coastal port of Saint-Valéry-en-Caux was crowned by the capture of Cherbourg.

Following the armistice, Rommel was involved in reenacting certain battles, such as crossing the Somme, for the documentary Sieg im Westen (Victory in the West). This is the story of Rommel and the 7th Panzer Division—the so-called 'Ghost Division'—in France, 1940.

The non-profit UK based group known as the First World War Aviation Historical Society, that publishes their journal, Cross & Cockade International, four times a year. Issues are available as printed as well as digital copies (or both). A new magazine, Contact!, is now available in both print and digital download. The Society also provide a free newsletter (sign up on their website) and occasionally publish WWI themed books like the Sopwith Dolphin monograph I reviewed earlier for IPMS USA. This Journal is the sister of the US Journal, Over The Front.\The Autumn 2024 journal of Cross & Cockade International features a color painting by Dugald Cameron of a pair of BE2as and a Maurice Farman Se.11. All are with 2 Squadron RFC in 1913 at Upper Dysart aerodrome, about 3 miles south of Montrose, Scotland.

The Chevrolet Nova was everywhere in the late 1960s. Your grandma may have had a 4-door sedan for getting the groceries, your parents may have had a station wagon as the family car or a 2-door for your dad’s daily commute, and the high school down the street may have had one with a raised rear suspension and Keystone Classics. They could be had with everything from a basic in-line 6-cylinder to a powerful V-8. As a result, many people of a certain age have fond memories of these vehicles, and kit manufacturers have done a fine job providing us modelers with numerous kits of this subject. One of the latest is this 1/32 scale offering from Atlantis Models of a 1969 SS 350. The 350 V-8 was the largest engine you could get on the Nova that year, and it was rated at 300hp.

I came back to the hobby during COVID. One thing I hated, and still hate doing is sanding putty.I am just not that good at it. I am always looking for something to help me. The UMM-USA series of sanding bars are one solution to a gritty problem.

The bars come in various sizes; fine, small, medium, large, extra-large and extra-extra-large. I reviewed the Extra-Large version. They come as a six-sided polished aluminum bar, with the ends being pointed.

My initial take on the block was one of curiosity, a large flat good for sanding large flat surfaces, or so I thought; something most aircraft and ship models do not have. I then took a closer look and realized that the angled/pointed ends would be great for small tight surfaces, or if a very narrow area needed to be sanded, which is how I have been using it. Ironically, my son printed a sandbag wall and used the long flat bottom to clean it up.