What's New

Review Author
Hub Plott
Published on
Company
Hobby Boss
Scale
1/48
MSRP
$68.99

I have always had an interest in the An-2 ever since watching one take off across the width of the runway at Shaw AFB. It is good to see a 1/48 kit of this much used multi-purpose aircraft.

This kit makes the fifth time that the An-2 has been kitted in 1/48 scale. The first was a Soviet Union-made “desk top” model kit similar to the Allyn and Microscale kits. Neomega did one in resin, and short-run injection companies Bilek and Valom have also issued 1/48 Colt models. This new kit by Hobby Boss marks the first time a major model company has produced an injection molded kit of the An-2.

Book Author(s)
Compiled by Neil Robinson
Review Author
Paul Mahoney
Published on
Company
AIRfile Publications
MSRP
$29.00

AIRfile’s Operation Overlord provides a detailed description of the “Distinctive Markings” carried by Allied aircraft in Northwestern Europe. Volume One is dedicated to RAF and Commonwealth aircraft, with USAAF machines to be covered in a later volume.

The production and research quality of this book is first-rate. Stiff card covers enclose over 70 glossy pages printed on thick stock. Full-color profiles are present on almost every page.

The first section of this book covers those “Distinctive Markings” carried by RAF aircraft during the portion of the War prior to the invasion of Europe. The specific markings carried by British aircraft are described and illustrated. General RAF markings practice (such as the ½-black undersides used for recognition from the ground) is covered. Also, of particular interest, markings relating to specific aircraft such as the Typhoon and Mustang are shown.

Review Author
Dave Morrissette
Published on
Company
Fujimi
Scale
1/24
MSRP
$84.95

When Fujimi announced a group of vehicle kits based on the 1982 movie Blade Runner, I was excited. This is one of my favorite movies, with great actors like Harrison Ford and Rutger Hauer, moody lighting, and great special effects. The first release in this series is a 1/24th scale Spinner Police Car. The Spinner is one of the iconic cars in the series, as it is a flying police car which can also change to a normal driving car.

Inside the box are eight sprues. Five of these are molded perfectly in white styrene with one perfectly clear sprue for the windshield and parts. Lastly, there is one sprue molded in transparent blue and one in transparent red for the police lights. There is an excellent decals sheet and a small PE fret with “Spinner” logos.

Review Author
Phil Peterson
Published on
Company
Dragon Models
Scale
1/72
MSRP
$19.99

I have always loved reading about the LRDG and SAS during the North African campaign during WWII. Their ability to make long treks across the desert, attack the enemy at their bases, and return was just amazing.

Finally, a kit has been released in 1/72nd scale of the LRDG’s main mode of transportation, the Chevrolet Model 1533X2 30 cwt 4x2 truck. So let’s take a look at it.

Book Author(s)
Ralph A. Riccio
Review Author
Perry Downen
Published on
Company
Mushroom Model Publications - MMP Books
MSRP
$40.50

The birth of the Irish Republic that we know today began in 1916. The leadership and members of the Irish Republican Brotherhood (forerunners of the Irish Republican Army) decided that the British parliament had delayed Irish home rule long enough. It was time for action. On Easter weekend in 1916 a group of approximately 1,600 armed rebels seized key locations in Dublin and proclaimed separation from Britain and established the Irish Republic. From the steps of the General Post Office a proclamation was read that announced the birth of a sovereign, self-determined Irish Republic. The proclamation established a legislature, a government, a court system, and a police force. At the same time, the Irish Volunteers, a military organization established in 1913 by Irish nationalists, became known as the Irish Republican Army (IRA). For the next three years the IRA targeted the British forces in Ireland with deadly guerrilla strikes.

Review Author
Brian R. Baker
Published on
Company
Special Hobby
Scale
1/72
MSRP
$29.00

History

The Spitfire is probably one of the most-modeled kits in 1/72 or any other scale, for that matter. It was used in many different modifications and variations, and a few are still flying today. It combined the classic beauty of a thoroughbred with the performance of a champion, and remained in production well after the end of World War II even though the original prototype first flew in 1936.

Review Author
Howie Belkin
Published on
Company
Cyber-Hobby
Scale
1/72
MSRP
$45.99

First, I owe an apology to you and to Dragon for my delay in building and reviewing the “…best dive bomber the Navy ever flew but also the last.” That final assessment came after a difficult start in replacing the Dauntless, “one of the most popular aircraft ever to fly.” In fact, when the first squadrons conducted trials aboard the Essex CV-9, “…the ship departed for the war zone with SBD Dauntlesses instead.” In trials aboard the second assigned carrier, the second Yorktown CV-10, “…the results were so disastrous that the ship’s Commanding Officer, Captain J.J. ‘Jocko’ Clark, stated that the aircraft’s only value was as an anchor.” Though the Helldiver could carry a heavier payload and was faster than the Dauntless, and ongoing improvements ironed out its shortcomings, it became a great aircraft with the moniker the Big Tailed Beast or simply, the Beast. The Helldiver’s combat debut was on November 11, 1943, when VB-17 attacked the Japanese island fortress at Rabaul.

Book Author(s)
Lt. Col. William B. O’Connor, USAF (Ret.)
Review Author
Mike Hinderliter
Published on
Company
Zenith Press
MSRP
$30.00

Zenith Press has just put out a book on the F-117 stealth fighter. It is written by Lt. Col. William B. O’Connor and is about a year in the life of an F-117 pilot. It starts out with the author’s flying career and then gets into the development of the F-117 and eventually the air war over Kosovo.

I really enjoyed reading this book because I like the first person, I-was-there type of book. The author does a great job of explaining how stealth technology came about and how it works, in a language that is easy for a non-pilot to understand. You almost feel like you are flying on a mission with him. I also liked how he talked about the flying community and their rituals when they finally get qualified in a particular aircraft. You also get a little taste of the politics on how promotions work in the Air Force. All in all, a very enjoyable read.

Thanks to Zenith Press and IPMS USA for allowing me to review this book.

Book Author(s)
Jon Diamond
Review Author
Marc K. Blackburn
Published on
Company
Osprey Publishing
MSRP
$18.95

This is my first opportunity to look at the relatively new Osprey series called Command. As the name suggests, this series doesn’t look at hardware or military units, but the commanders. As with most Osprey books, this series provides a broad overview of the commander’s life, command responsibilities, leadership abilities, and legacy. I jumped at the chance to see how the Osprey formula works with personalities.

Review Author
Don Barry
Published on
Company
Bronco Models
Scale
1/35
MSRP
$69.95

Packed in a sturdy, well illustrated box, the kit consists of 28 sprues of dark grey plastic, 1 clear sprue, and 2 photo-etched frets, one of which consists of the weld seam inserts for the spare jerry cans. Also included are 5 each of three slightly different back packs, a covered and folded windshield, one folded-down top, and one full closed top with a clear rear window. Decals include pre-made and make-your-own registration plates, instrument faces, stencils, and division and army group markings. Paint call-outs for detail and overall colors refer to Mr. Hobby, Hobby Color, Humbrol and Tamiya brands.

The glossy instruction booklet is broken down into 25 assembly steps, with some options for early and later versions. I found it prudent to deviate from the published sequence, but each builder may feel differently.