With the release of the Eduard Bf-109G-6 kit it was inevitable that they would release Brassin sets for the kit. This one allows the modeler to open up the engine cowling and expose the beautiful engine underneath.

Packed in a sturdy top opening box with individual ziplock bags inside that protect the parts with the aid of foam inserts. Four small ziplock bags protect and segregate the parts in shipping. There are 66 resin parts molded in various shades of grey resin. I could not find any issues with bubbles or deformity. Also included is a brass photo etch fret. I mean it is from Eduard so you know it is perfect. Included is a really nice little decal sheet that has the markings for the engine. You can make up any serial number in yellow or white.

Aires has issued two versions of a 35 lb. lubricating bucket pump used to grease planes and the like. Both versions have exactly the same resin, photoetch and paint schemes. The only difference is the decals- one is for the US Navy and the other, the US Air Force. It makes sense to do these build concurrently.

The resin consists of eight parts; four for the wheels, the handle, the plunger and the main body. The parts are cast perfectly and only the large body needs a pour spout removed. The photoetch parts are for the nozzles and the handles. There is also a length of wire for the hose. Assembly is pretty quick. The instructions call for you to cut small wire pieces (not included) to add the handle as pivot pins. I skipped this part; it is way to small) and just glued all the parts in place. The four wheels are glued in place and the handles and construction is done.

Diving back in, we'll build the cockpit. It is similar to the frame itself. This starts with the two side walls which are detailed with extra levers and gauges and the throttles. These are painted RLM 66 so it stands out from the RLM 2 frame. The rudder pedals are painted and they are sandwiched between the two side frames and attached to the fuselage. Fit is perfect. The instrument panel is next and there are two choices. One is clear and there is a decal that can be added to the back. The second is solid and you can add the decals to the front. I built the clear version with Elmer's in the glass parts and then painting and adding the decal to the back. Once dry, I sprayed the back of the panel black as it is visible in the plane. To finish off the cockpit, the instrument panels is added to the frame and then added to the cockpit with its bracing. The linkage rods and control stick are added and the cockpit is done.

This kit contains two grey sprues with 63 overall parts to build 5 full figures of SS infantry troops on the Eastern Front. Three of the soldiers are carrying food, so it seems that they just raided a farm and are happily on their way to make dinner. One soldier is carrying two chickens, while another has eggs or potatoes in his helmet. A third is carrying a watermelon on the box top, but it really is a cabbage. Most are smiling and have happy expressions on their faces.

There also is a sprue with 112 parts of German weapons and personal equipment included. Only five weapons are needed, so lots for the spares box. Each figure is divided into a head, torso, two arms and two legs. The overall detail is very good, but some of the seam marks will need cleaning up. There is a lot of flash on the middle of this sprue.

Thanks go to Aires/Quickboost for providing IPMS USA this review set and IPMS leadership for passing it my way!

Not much to this one; replace the kit items with the Quickboost exhausts and save yourself the serious pain of clearing out the kit exhausts… it’s a no-brainer! I took the QB set, painted them with Testor’s Burned iron metalizer (I used a brush) and cut them off the pour stub… installed with superglue, Fantastic!

This set rates 10 of 10; Worth every penny! Thanks again to Aires/Quickboost for another great review opportunity, and IPMS for allowing me to do the job!