What's New

Review Author
Jim Pearsall
Published on
Company
Brengun
MSRP
$4.50

This is a replacement canopy for Revell’s 1/144 EE Lightning jet fighter.

Everyone has that moment when they realize that the canopy for their model is missing, damaged, or unusable for some reason. As far as unusable, I’ve had canopies for some kits which were so thick and murky that there wasn’t any reason to put detail in the cockpit.

This one was just an exercise in doing a vacuform canopy. The Revell canopy for their EE Lightning F.6 was usable, but this item had been sitting on the list for a while, and I thought we owed Brengun a review.

I built the Revell Lightning pretty much out of the box, except for the markings which I borrowed from aftermarket sheets, modified from the kit decals, and made my own serials and aircraft numbers.

Book Author(s)
Marshall L. Michel III
Review Author
Bob LaBouy
Published on
Company
Osprey Publishing
MSRP
$20.00

In his organization of this book, Mr. Michel provides a logical approach to this ‘air campaign.’ The Table of Contents provides for the basic outline:

  • Introduction
  • Chronology
  • Attackers’ Capabilities
  • Defenders’ Capabilities
  • Campaign Objectives
  • The Campaign
  • Aftermath and Analysis
  • Select Bibliography
  • Index

During his introduction, I was surprised to read the author’s comments about an earlier book I had read and prior to this point considered to be the basic groundwork for this air war over Vietnam; Linebacker II: A View From the Rock. He calls this early recounting of the Linebacker II operations “an inaccurate and self-aggrandizing memoir.”

In this book, the author clearly lays out the 11 nights of the Linebacker II, and often ill-conceived organization, planning, and operations of these strategic and tactical missions. He does so in a very convincing manner.

Review Author
Luke R. Bucci, PhD
Published on
Company
Master Model
Scale
1/700
MSRP
$6.00

What You Get

A 2 ¾ by 5 1/8 inch 2-piece cardboard card wrapped in clear plastic containing a small Ziploc bag with Instructions and another card with a small plastic bag holding 20 barrels taped to the card (Figure 1). For no blast bag mounts (-058), each barrel is 7mm long with a 1mm tab at the end. For mounts with blast bags, each barrel is 4.5mm long with a 1mm tab at the end (Figure 2). The tip has a fine hole that is difficult to see, but it’s there.

Review Author
Damon Blair
Published on
Company
Hasegawa
Scale
1/72
MSRP
$69.99

The Shinmeiwa SS-2 Rescue Seaplane is a development of the Shinmeiwa PS-1 anti-submarine aircraft. The aircraft was used in a Search-And-Rescue (SAR) role, acting as an “Emergency Ambulance” for residents of Japan’s isolated islands.

Hasegawa’s kit of the SS-2 is an older kit that has been updated to represent the SAR version of this aircraft. Overall, the fit of the kit is fair, and there are some problem areas with parts fitting together. The detail on the flight deck is sparse for a kit of this size with a lot of windows to look in. It is a tail sitter, and you will need to add weight into the nose.

Review Author
Jim Pearsall
Published on
Company
Brengun
Scale
1/144
MSRP
$5.00

This is a replacement canopy for Sweet’s 1/144 Hurricanes. The Sweet kit is a really great Hurricane, very nice to build, with great fit. The kit canopy is molded as a solid piece, very thick. Well, for a 1/144 kit it’s very thick. There’s no hollow part inside the canopy, it’s just a chunk of nicely molded clear plastic. But that’s not why I really, really appreciated this review item. When I got the canopies in the mail, I got out a kit I bought at a local swap meet. The kit comes with two complete aircraft. Except this box only had ONE CANOPY!! That’s when I really knew I owed Phil Peterson and John Noack a big thank you for this one.

Book Author(s)
Mark Stille. Illustrated by Peter Dennis
Review Author
Marc K. Blackburn
Published on
Company
Osprey Publishing
MSRP
$24.00

Osprey Publishing continues to add titles to its long running Campaigns series, this time tackling the struggle to liberate the remaining islands in the Solomon’s Island chain in the months after the successful conclusion of the Guadalcanal campaign. Using their tried and true format, the volume looks at the opposing commanders, forces, and plans before diving into the narrative on the campaign. Using contemporary photographs, superb maps, and full color illustrations, this volume does an excellent job in summarizing the strengths and weaknesses of both sides. Since these volumes are meant as an overview, they do not go into great detail into the campaigns, but provide enough information to give the reader a grounding in the campaign.

Review Author
Damon Blair
Published on
Company
Quickboost
Scale
1/72
MSRP
$6.50

The Douglas A-1 series of aircraft (known as the AD prior to 1962) was designed as an attack aircraft that could carry a heavy load of ordinance.

Quickboost’s A-1J Tailwheel brings an improvement to the Hasegawa A-1 kit. This part replaces only the bottom part of the strut, and not the entire strut. The wheel itself is separate from the strut.

I cut the bottom portion of the tailwheel strut where indicated in this kit’s instructions, and then glued the replacement strut piece into place using cyanoacrylate glue. Once the glue was dry, I painted the strut, installed the wheel onto the strut, and installed the strut onto the model.

I highly recommend this detail set for the Hasegawa kit. My thanks to Quickboost for the review sample.

Review Author
Damon Blair
Published on
Company
Quickboost
Scale
1/72
MSRP
$6.50

The Douglas A-1 series of aircraft (known as the AD prior to 1962) was designed as an attack aircraft that could carry a heavy load of ordinance.

Quickboost’s A-1H Tailwheel brings an improvement to the Hasegawa A-1H kit. This part replaces only the bottom part of the strut, and not the entire strut. The wheel itself is separate from the strut, and you have a choice of two wheel designs, one being spoked and the other is a solid wheel design.

I cut the bottom portion of the tailwheel strut where indicated in this kit’s instructions, and then glued the replacement strut piece into place using cyanoacrylate glue. Once the glue was dry, I painted the strut, installed the wheel onto the strut, and installed the strut onto the model.

I highly recommend this detail set for the Hasegawa kit. My thanks to Quickboost for the review sample.

Review Author
Damon Blair
Published on
Company
Hasegawa
Scale
1/72
MSRP
$69.99

The Douglas A-1 series of aircraft (known as the AD prior to 1962) was designed as an attack aircraft that could carry a heavy load of ordinance. Both the U.S. Navy and U.S. Air Force flew the A-1H in the Vietnam War. The kit represents two aircraft flown off of the U.S.S. Ticonderoga aircraft carrier during that war.

Hasegawa’s A-1H kit has petite, engraved panel lines. The fit of most parts is excellent, except for the bottom aft wing-to-fuselage joint. That joint requires careful fitting, along with some putty to smooth it out. Most of the other seams required little more than sanding.

The cockpit is sparse in detail, consisting of a seat, an instrument panel, and a control column. Instruments and consoles are represented by decals. With the engine, you have the choice of having the cooling flaps open or closed.

Review Author
Jarrod Booth
Published on
Company
Special Hobby
Scale
1/72
MSRP
$35.00

The CASA-212 Aviocar is a versatile transport aircraft that was manufactured in Spain since the ‘60’s, and Indonesia until 2012. The C-41A is a military version used by the US, Mexico and many other countries within Central and South America. It exhibits excellent short field takeoff and landing (STOL) abilities, and is able to operate from unprepared airstrips.

This model is a re-release of various other versions of the aircraft. It comes in a very sturdy top opening box with a nice painting of the US military C-41A. All sprue trees were contained in one bag, with the clear parts and decal sheet in their own bags. The clear plastic bags are closed with sticky strips, so be careful when removing the decal sheet, and that you don’t allow the sticky strip to attach itself to the decals. I did, somehow, and had a heart stopping minute separating them! The instruction manual is printed on good quality glossy paper, and each step is clear, accurate and in color where needed.