Reviews

Review Author
Howie Belkin
Published on
Company
Quickboost
Scale
1/72
MSRP
$5.50
  • Kit No. QB 72 374 Exhaust & Damper Cooler, $5.50
  • Kit No. QB 72 375 Gun Barrels, $5.50
  • Kit No. QB 72 376 Undercarriage Covers, $5.50

These are simple but clean sets of precisely cast resin replacement parts that quickly and easily improve already good 1/72 scale early P-40 kits. Each set consists of one gray resin block with easily removed molded parts. The hollowed-out exhausts, scale thin damper cooler flaps, machine gun barrels with oblong cooling vents, and detailed undercarriage covers (landing gear doors) are intended for Airfix’s new-tool 1/72 Curtiss Hawk 81-A-2 (P-40B/C) kit, but can fit other kits as well. QB 72 374 has two rows of six round exhaust pipes attached to the resin block by a narrow feed that can be easily sawed free, as can the Damper Cooler (the cowl flaps underneath the rear end of the engine).

Review Author
Tim Wilding
Published on
Company
Master Box Ltd
Scale
1/35
MSRP
$20.99

This is a five-figure set of a World War II Soviet tank crew. The first figure is an officer who is sitting and smoking a cigarette He is wearing a blue jacket and khaki pants, but does not have any headgear. The second figure looks like a commander, since he fits into the commander’s hatch of the Trumpeter KV-85 that I am also reviewing. There are two options for his left arm. One is extended with his hand resting on the turret top, while the second one is crossed in front of him and is resting on the split hatch.

The third figure appears to be a loader or gunner, since he sits perfectly on this open hatch. The box art show him with a pistol and a cross-chest belt, but that is not on the actual figure. The next figure is the driver, who is posed as actively driving the tank with both hands on the control sticks. The fifth figure is a crewman who is holding his helmet and has a foot propped up on something in a casual pose.

Review Author
Tim Wilding
Published on
Company
Trumpeter
Scale
1/35
MSRP
$52.99

The Kliment Voroshilov (KV) tanks were a series of Soviet Red Army heavy tanks, named after the Soviet defense commissar. The KV series were known for their extremely heavy armor protection during the early part of World War II, especially during the first year of the invasion of the Soviet Union. Later in the war, the KV series became a base of development for the Joseph Stalin (Iosif Stalin, or IS) series of tanks. The KV-85 was a KV-1S with the 85mm D-5T cannon in a new turret, and with the ball mounted hull machine gun removed and the hole welded shut. 148 of these tanks were produced from the second half of 1943 until the spring of 1944 as a stopgap until the IS tank series entered production. This tank had its original turret, but later models were equipped with IS-1 turret.

Review Author
Dick Montgomery
Published on
Company
Aoshima
Scale
1/32
MSRP
$45.00

Quick and easy. This kit can be described in those two words. This kit was assembled over a period of 3 days, spending no more than 30 minutes during each of the 3 modeling sessions. And when one considers that most of the time was consumed in painting the parts, that tells you that the actual construction process was….quick and easy.

The Parts

The kit consists of 33 parts, 6 of which make up the display base. There are two versions of the Himawari that can be built. An earlier version will use the 8 antennas (parts 15) while the more recent Himawari does not need those parts.

Book Author(s)
Edward M Young
Review Author
Dan Mackay
Published on
Company
Osprey Publishing
MSRP
$22.95

From the Philippines to Okinawa, the unthinkable Kamikaze generated surprise and fear across the US Pacific fleet that outweighed the actual combat effectiveness of these Special Attack units. The new title in the Osprey aces series focuses on the Navy, Marine, and USAAF commands that confronted this new threat. The IJN and IJA lost some 900 aircraft in these mass attacks. 91 pilots from the Navy, Marines and USAAF became aces during these campaigns (most aces were from the Navy).

Edward M Young walks you through the development and first use of the Special Attack units right up to VE day. The Navy’s response and tactics to counter this new threat is very well chronicled. Each ace is covered with his individual tallies and the circumstances of each victory.

Review Author
Pablo Bauleo
Published on
Company
Hasegawa
Scale
1/48
MSRP
$55.99

The Seafire Mk.Ib was basically converted from the Spitfire Mk.Vb. The kit follows the heritage of the actual subject, being a “regular” Hasegawa Mk.Vb with a resin plug for conversion into a Seafire Mk.Ib. Be aware this model is a conversion; that means you will have to cut and replace some parts of the plastic fuselage with the resin replacement parts. But as conversion goes, this is an easy one to get your feet wet in the world of conversions.

The boxing includes decals for 4 different finishes on 3 different airframes. The instructions only list 3 camouflage styles, but actually there are markings provided for two different finishes (blue gray/green/sky) of the same airframe (MB 345), before and after being assigned to the HMS Formidable. The other two finishes are for a training unit (blue gray/green/sky) and another one in an overall glossy sea blue, for operations in the Pacific with SEAC roundels.

Book Author(s)
Chris Gibson
Review Author
Hub Plott
Published on
Company
Hikoki Publications
MSRP
$49.95

This book looks at the RAF and Britain’s air defense, post-World War II. More specifically, it looks at the defense of Britain from nuclear strikes.

This book is broken down into ten chapters, beginning at the end of WWII when the British defenses were set up to protect her from massive raids by piston-engined bomber aircraft and the post-war realization that the advent of the V-1 and V-2 missiles and the jet engine had rendered all of this obsolete. Add the atomic bomb to this, and the RAF was scrambling to devise new defenses.

The author does a good job of discussing the Soviet threat, as well as all of the various programs that were being devised to deal with it. Those that made it to reality, as well as those that never made it off paper, are all covered. All of the aircraft projects, as well as those involving missile defense, are discussed, with coverage even given to dealing with hijacked airliners.

Review Author
Roger Carrano
Published on
Company
Airscale Model Aircraft Enhancements
Scale
1/32
MSRP
$19.50

Airscale is relatively new to scale modeling and has come out with decals in popular scales to aid in detailing instrument panels, and which can also be used for dashboards along with placards, which is another added touch to instrument panels and dashboards. I’m sure that anyone who has bought these products has used them some way in every model that they have built since purchasing them.

Review Author
Franklyn Cook
Published on
Company
Trumpeter
Scale
1/35
MSRP
$53.99

About the BTR-70

The BTR-70 is an eight-wheeled armored personnel carrier. BTR stands for Bronetransportyor (literally "armored transporter"), originally developed during the late 1960s under the industrial designator GAZ-4905. On August 21, 1972, it was accepted into service and would later be exported to the Warsaw Pact and other allies. Introduced as a successor to the earlier BTR-60, it most closely resembles a BTR-60PB. Other improvements include heavier armor plating and tires less prone to puncture. In other respects, the vehicle is very similar to the BTR-60PB, with a more powerful petrol engine configuration and armament of a primary heavy machine gun and secondary PKT machine gun on a roof-mounted turret.

Review Author
Keenan Chittester
Published on
Company
Mirage Hobby
Scale
1/48
MSRP
$95.99

The kit comes in an attractive box with a profile of one of the marking options on the box top. This is a special limited edition and includes a very nice gold colored coin that is packed separately in a fancy red box similar to what you would get a piece of jewelry in. I am not sure what the parts count is, but I'm sure there are well over one hundred parts. The parts are molded in a medium blue-grey color and they have a slightly rough texture. The plastic is a little on the soft side, so care must be taken when sanding and cutting. There is a small photo etch fret with seatbelts and other detail parts. I did not use all of the PE parts because some of them were so thin that they came apart when I cut them from the fret. There is also a small bag of resin parts comprising oxygen bottles, various boxes, and some things that look like duffel bags. The molding on the resin parts is not up to the standards of Aires or CMK, but it is decent.