This set is designed for use with kits of the T-38 Talon, the F-5B Tiger I and the RF-5A/E/S. The set consists of 3 brass parts – the nose pitot and two 20 mm gun barrels, however, as later versions of the RF-5 only have one gun installed, so you will need to check your references. If you are modeling a T-38 or a F-5B, you will only be using the pitot tube as neither had guns installed.

The instructions are clear about what size drill bit you will need for each installation and clearly indicate how just how much of the pitot tube extends past the kit nose. Take care when drilling your holes and check them as you go to ensure that the pitot tube in on the aircraft centerline and parallel to the ground and that the gun barrels are parallel to the aircraft centerline.

This is another nice detail set from Master Model and it will dress up your Talon or Tiger I jet.

Recommended. Thank you to Master Model for the review sample.