Red Baron Show Car

Published on
Review Author(s)
Scale
1:24
MSRP
$32.99
Product / Stock #
M6470
Provided by: Member Supplied

Overview

This review covers the Red Baron show rod from Atlantis (kit number 6740). It is a 1:24 scale kit rated skill level two, so it suits the intermediate builder. This build is bittersweet because Tom Daniel, the kit's designer, passed away in October. First released in 1968, the kit has been re-released many times. It may be the bestselling model of all time, with over 2 million sold. Monogram even commissioned a full-size show car to tour the country. Atlantis Models acquired the molds from Revell, so Tom's designs will live on.

Kit Contents

You get 63 parts molded in red and chrome-plated plastic, plus black vinyl tires and water-slide decals. The decals include bullet holes, white tire decals, iron crosses. The chrome on the trees is good, but the helmet chrome is a little light and may be scuffed from shipping. The parts are nearly flash-free, and the decals are great. You will find that the parts fit well overall, but placement can be tricky.

Engine and Body Prep

The kit was aimed at young builders in 1968, so the engine is simple. It has seven pieces and represents an inline Mercedes-Benz aircraft engine. The one tricky spot is placing the exhaust pipes and the cam. They match up on top with the cylinder heads. You can paint the block any color and leave the chrome parts as they are. You will also want to scrape/sand off the parting lines and scrape the plating off any surfaces that need gluing. For the body, trim the large sprue connector in the back and sand the edge smooth. Wash all the parts in warm, soapy water and let them dry before you glue. Save your chrome touch-ups for last. Molotow chrome paint from the refill bottle gives you a beautiful finish but doesn’t take handling well.

Interior and Painting

The firewall is a chrome diamond-pattern piece with small braces, and you can fit the cowl to the body before painting. Add some gauges to the IP and console for detail. I painted the body and interior in Krylon Colonial Red. Drop the interior into the body but leave it back a few millimeters to leave a raised edge to locate the helmet. Spray the interior with dull coat to tone down the shine, and paint the frame rails flat black. The steering column is flimsy, so I replaced it with 1/16" Evergreen rod. Paint the steering wheel walnut brown and the spokes and the console ribbing chrome too.

Suspension, Wheels, and Assembly

The rear axle has a breakaway strap and is easily broken once you remove it, so be careful. The rear tires have some flash on the inside edge and are two-piece, joined with black CA glue. The front tires have a dip in the center of the tread, as the wheel diameters are a bit large. You may want to replace the tires for a more realistic appearance. The front radius rods are a bit short, attach them to the front bracket then snip off the small pins and glue that end to glue the end to the frame rail. For the final detailing, I painted helmet spike gold. Glue the helmet to a ridge you create on the interior. Add the tire decals last, including Tom Daniel's name as a tribute, and add aluminum circles inside the exhaust tips.

Conclusion

You’ll have no parts left over, unless you replace the steering column. The kit is easy to build, has cool Tom Daniel vibe, and you can finish it in a couple of evenings.

Box Art

Comments

Add new comment

All comments are moderated to prevent spam


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.