Eduard has come out with several photo etch sets for the 1/32 Scale, HK Mk.IV Mosquito and this is one of them. This set provides new replacement control panel parts, control levers, side panel parts, rudder pedals, bomb sight and some other interior details. This set is a copy of their 32840 Interior SA (self- adhesive, I assume) without the additional fret with bulkheads and such.

The instructions are quite adequate to provide detailed information on part numbers and placement.

Assembly is straight forward but a little fiddly. There are a bunch of very tiny parts that need to be bent and shaped. I used a hobby knife with a number 11 blade to remove the photo etch from the fret. Some of the small parts are hard to hold and glue at the same time. This makes for a time consuming and sometimes aggravating assembly. I used an ACC type glue for assembly when required.

Thank you to Unique Master Models (UMM) for generously providing an excellent tool for “field testing.” Thank you as well to the IPMS Reviewer Corps for letting me be an evaluator.

The tool is small, has a nice weight or heft in the hand, and does not flex easily. The scriber is strongly attracted to a magnet, but is not magnetic itself. The surface is highly polished. The longer deburring edge and the shorter scriber edge are sharp enough to start scribing right out of the cellophane package. The cutting edges should be easily honed as needed. The smooth sides moved easily along my steel straight edge. I pushed the limits a bit and found there was no flex in the tool that affected the “groove.” The primary tool design is for scribing lines in plastic, but I expect to discover other uses when the tool is in hand. Further, the tool has that somewhat undefinable sense of “feeling right.”

The M270 MLRS (Multiple Launch Rocket System) was first delivered to troops in 1983 and has since been delivered to many NATO countries with over 1,300 being built. The last M270 was manufactured in 2003, when a last batch was delivered to the Egyptian Army.

DML first produced a MLRS kit in 1992. The kit was no. 3522 followed soon after by no. 3523. The major difference was the inclusion of 2 separate M26 rocket pods. Jump to 2015 and Dragon has released a “new” version of this incredible artillery piece.

In 1992, the kit suffered from several issues such as the link length track, poorly rendered road wheels, and attached support arms and shocks. This new release has not rectified any of the issues. The only difference between this kit and no. 3523 is the inclusion of three small part sprues. Do not expect “Big Foot” track as depicted on the box top. This re-issue still has the earlier style track.

This is another of those Brengun kits that is SO useful when doing a diorama. In this case, the diorama is a USN aircraft carrier deck, and the kit is the MD-3 tow tractor. Actually, the kit is TWO MD-3 tow tractors. Better value for the money.

While I was looking up the catalog reference for this kit, I found another useful item in the Brengun accessories catalog. How about a tow bar for this tractor? It’s item number BRL144115, $6.05.

The Kit

You get two of all the parts. There are two sets of resin parts to make two tractors. Also, the PE fret has all the (tiny) parts you need to make two tractors. The decal sheet has enough decals to make two tractors, as long as you don’t want the black warning stripes for the bumpers on the second kit.

All of the resin parts are nicely molded, without bubbles or excessive flash. The PE parts were nicely set up, with almost no trimming required on any of the parts.

Dragon continues to expand its “Modern Sea Power” Series, this time with the introduction of the 1/350 Zerstorer Class 1936A, with a twin 150 mm turrets.

Upon opening the box you find 18 sprues, plus two small photoetch frets and decals. There is a total of over 550 parts on this kit.

The parts are finely molded, with virtually no flash anywhere. I’ve only was able to spot a bit of flash in one sprue, around the propellers. Slide mold technology was used extensively in the kit minimizing seams and allowing multiple pieces (bridge, hull) to be molded in a single piece. It should be noted it the hull is packed with a small protector to protect the sharp bow from being damaged.