Thanks to Hataka Hobby and Steven International for sending samples of this new line of acrylic model paint. Thank you to the IPMS Reviewer Corps for letting me review them! I am very appreciative of the chance to contribute back to the scale-modeling community.
Specialty Press is a publisher and distributor of aviation books. Their long running series on in-depth design and operational histories of various aircraft in the Luftwaffe continues with the publication of their comprehensive look at the Junkers Ju 52. What the C-47 was to the Allies, the Ju 52 was to the Axis. The trimotor transport served as the primary pre-war civil aviation aircraft for Germany and during the war it served on every front in the war in a wide variety of roles – bomber, transport, ambulance, minesweeper, and seaplane.
I’ve built three of the Eduard Bf-109s and absolutely loved the finished product. Is it over-scaled? Slightly. Get over it. It is a nice 1/47th scale model. I can’t wait for their reengineered one too.
That said there are a lot of really nice things to do with the kit. The rear bulkhead is a separate item added when the fuselage halves go together. This little gem of resin has the bulkhead with the access door closed. This part is properly proportioned and has the proper relief of the door. Adding it to the model will be easy enough and the part is a direct replacement for the kit part.
Highly recommended
Thanks to Aires and IPMS/USA for the review copy. You can get yours directly from Aires at https://www.aires.cz/en/ or at your local hobby shop or online retailer.
This set is the first set that I can remember that allowed the modeler to pose the bulkhead behind the pilot in the open position. This will definitely set your Bf-109 apart from the rest. The one thing that comes to mind immediately is adding this set to make a Galland like opening with the lobsters and champagne. Yes I know that was an F model but you get the idea.
Molded in light grey resin with the minimal resin flash, there are three parts for this set. There are four parts on the two pour blocks but you only need the three. The big piece is a one piece affair that will slide nicely into your kit. You will have to remove the pour block on this piece but after that it is already done for you. The bulkhead is a direct replacement for the kit part, but this piece is opened so you can see into the storage area. The access door has detail on both sides, a very nice touch.
The Panzer III Ausf.M was an improvement of the previous J through L versions, with extra superstructure front and mantlet of 20 mm of armor. It also was equipped with fording exhaust which allowed deeper river crossings. The gun was the standard long barrel 50 mm (1.97 in) KwK 39 L60. It also had six 90 mm NbK smoke dischargers, three mounted on each side of the turret. The Ausf.M could also be equipped with protective steel plates, called Schurzen, designed to protect the turret area from enemy anti-tank weapons. Further armor protection were large steel plate skirts suspended from either side of the chassis. A total of 1000 were ordered, but only 250 were completed. The Panzer III Ausf.M took part in the greatest tank battle of all time, the Battle of Kursk in July 1943. It is the Kursk Panzers that are depicted in this Dragon’s 1/72 Armor Pro series.
Continual thanks to one of our steadfast IPMS supporters, Ross at SAC, and to IPMS leadership for providing the set to me for review. Yes, it’s metal gear time again!
This set is the usual drop-in replacement for the Hasegawa series 1/48 P-40 warhawks. Parts include two main gear struts with torque links integrated, two side braces, retraction arms, and a tail gear. The tail gear is particularly welcome, as it is a typical offset one-arm tail gear, prone to damage from shelf abuse, moving models while dusting, or the occasional home pet attack.
Not much to say: Build the kit, then install the gear when you want. In this case, I assembled the airframe, and installed the gear so the kit would have something to stand on while I painted it. The pictures speak for themselves; the metal gear is a direct replacement for the kit items and fit with no problem.
This kit is a re-boxing of an earlier kit, with a photo etch fret, vinyl tracks, and decals. According to the website: "Cyber-Hobby is well known for its fantastic Orange Box tank and figure set combos in 1/35 scale. These special sets provide updated Dragon kits that have not been available for some time and at competitive prices."
Detail is excellent for this scale, and goes together without any glitches. You get decals for 3 tanks dated 1944-1945 located in Andler, the Eastern Front, and Germany. 2 tanks are three tone camo, one is two tone. The kit went together without a glitch, there's only 8 total steps:
The M3 Bradley Cavalry Fighting Vehicle (CFV) is an American tracked armored reconnaissance vehicle manufactured by BAE Systems Land and Armaments (formerly United Defense) based on the Bradley Fighting Vehicle Family. The M3 CFV is used by heavy armored cavalry units in the U.S. Army.
The M3 Bradley CFV is very similar to the M2 Bradley IFV (Infantry Fighting Vehicle) and is fielded with the same powerful two-man 25mm Bushmaster Cannon turret with the coaxial 7.62mm machine gun. It only varies from the M2 in a few subtle ways and by role. The M3 is classified as an armored reconnaissance and scout vehicle and does away with the firing ports found in the M2 series. The M3 also carries more TOW missiles as well as more ammunition for its 25mm and 7.62mm guns.
Aires, as part of their Aerobonus line, has started issuing 90mm figures of mascots for popular planes or units. These have included the stinging bee for the Skyraider of VA-176 and the tomcat from VFA-31 for the F-14. They continue this with a mascot for the Mig-21 which is a caricature of a Mig-21 pilot in a full flight suit. I could find no further information about what unit it might represent or what specific pilot is featured.
The parts break down is simple - the body and the head. Take your time separating the casting blocks - they are beefy. Once separated, there are some seams on the inner legs that need sanded and you’re ready for some paint. I primed the kit with Alclad gray primer and set it aside to dry.
A somewhat neglected kit of a very interesting aircraft, Testors 1/48 OV-10 gets an excellent decal set from Caracal Models. For those unfamiliar with the plane, the OV-10 was designed for counter-insurgency (COIN) operations and served the US military with distinction from the Vietnam War to the first Gulf War. It is a tough plane for operating in difficult situations. This set of decals covers the Air Force, Navy, Marines and also the Venezuelan Air Force with marking for 11 planes. They are:
