Another in a long line of excellent turned metal (aluminum in this case) items from Master Model; IPMS USA sincerely appreciates Master’s support of our reviewer corps!

Once more Master provides a turned-metal pitot probe and Air-Refueling nozzle to replace the kit items; these are destined to satisfy our requirements for strength and accuracy.

This package contains two metal parts in a double-bag system; first, the outer protective card with details on the contents, then an internal “small” bag with the scale, strong pitot tube and Air refueling probe nozzle. As you can see by the pictures, these metal parts have far better detail than the kit items.

This resin set consist of ten parts. These wall supports are what you see on older brick buildings that holds the internal framing to the outside walls. They will also work of stucco exterior buildings.

These parts come separated and with very minimal clean up needed. I had to clean off some flash on a couple supports, maybe 5 minutes of work. There were air bubbles blemishes on three of the parts. Two has an air bubble on the end of the bolt and the “S” bracket had two bubbles on the S part of the support. I was able to fill these with a little super glue and sanded it smooth. The two in the bolt heads I left along, since they are hard to see.

I was really impressed with the detail on the star and the “H” u-channel support. I used a little blue tack to secure them to a plastic sheet for priming and painting.

These would be great for dioramas of any European city. They could be easily added to an existing kit or used as rubble.

Add On Parts brings us a photo-etched sheet of modern style razor wire. It resembles concertina wire used the US Military. The wire is one continuous strand zigzagging on the sheet with thin strands of metal connecting the rows. There are about 30 rows of wire. The razor barbs are very finely etched and are really sharp.

I cut a section of wire that was five rows long and soaked it in AK Interactive photo-etched burnishing fluid. This wire turns a nice metallic black look. I thought I would have problems with it breaking as I wound it around the hedgehog, but it hold up really well. I was able to reposition it with no breakage problems.

Even thought this is a modern razor wire, I believe you could easily use it in any time frame. It gives the impression of barbed wire and is hard to tell the difference with he naked eye.

I would like to thank Add On Parts and IPMS for the opportunity to review this product.

This set is a replacement cockpit for the Italeri B-57G Canberra night strike aircraft cockpit. It is well cast in a medium grey resin with no pinholes or short casts. Light flash was present on a couple of the parts but was easily removed. It should be noted that care must be exercised when removing the pour plug from the bottom of the cockpit since, if you remove the plug completely up to the level of the bottom of the cockpit, the resulting floor of the cockpit is very thin. The set consists of the cockpit tub with detailed side consoles, side walls, and bulkheads, two pretty accurate, well detailed seats, front instrument panel, rear instrument panel relevant to the B-57G, throttle and gear levers (very fragile), a canopy strut jack, and a canopy support bow. This last piece has an extension that rests against the top center of the middle canopy bow. This extension is very fragile and prone to breakage.

According to Bombshell

The mission of BombshellDecals.com is to provide top quality decals of iconic nose art for scale modelers. We are a small home-based, U.S. Army veteran owned company, located in The All American city of Fayetteville, North Carolina, just outside Fort Bragg.

The Product

My sample arrived in the standard zip-loc bag we’ve come to expect from the aftermarket decal retailers. The cover sheet artwork features beautiful nude and non-nude nose art aircraft. The decal sheet itself is a masterpiece with seven options and enough decals to do at least two aircraft. Printed by Cartograf and made in Italy the decals are perfect in every regard. The only drawback worth noting is the lack of information specific for each aircraft option. All but one aircraft are painted in the standard tri-color paint scheme, it’s painted overall medium blue.