The set consists of one photo etch sheet. The PE parts are an unpainted natural metal (silver) color. This set is kind of interesting. You use the kit parts and these simply wrap around the existing belts, providing a very good looking ammo belt tray combination. The instructions are quite adequate in explaining the bending and placement of the details.

The down side of this beautiful set is that once the plane is completed, it is hard to see all the work you have done. The new details are a little difficult to apply. I found if you glue the sides first, than wait a little bit for the glue to set, then you can bend the top down to fit. Also, the bottom of the belts are not detailed. This is especially noticeable in the forward bombardier’s compartment.

HIGHLY recommended. One should have experience working with photo etch and using ACC glues or epoxy.

The set consists of one photo etch sheet in an unpainted brass color. You get parts to build complete new seats for the pilot and copilot. I thought the kit seats were nice, but these are really nice. Once completed and painted, they simply dropped in.

The instructions are quite adequate in explain the bending and placement of the photo etch parts. The seats really call out for the additional Eduard Seatbelt Set, 32746…which I would highly suggest getting.

The down side of these beautiful seats is that once the plane is completed, it is hard to see all the work you have done. If you do add the additional seat belts from Eduard, their placement and attachment are a little fuzzy and you will have to figure it out.

HIGHLY recommended. One should have experience working with photo etch and using ACC glues or epoxy.

The set consists of three photo etch sheets. Two of these are unpainted brass color the other is pre- colored for you. You get parts to replace and also detail the upper turret and the rear gun position. Also included are parts to replace the front and rear entry hatches and ladders. Additionally, there are new shelves for the waist gunners’ ammo boxes and new ammo boxes to sit on them. The final parts are new gun barrels for the many machine guns (13 in all).

The instructions are quite adequate in explaining the bending and placement of the details. They also tell you what you have to remove on the existing parts so they will fit.

The package says this mask set is designed for the Trumpeter Seahawk Mk. 100/101. However, it also can be used for masking the canopy in the Trumpeter Seahawk FGA.Mk.6 kit (if you are unable to find Mask set EX220), since these kits share the same clear parts. With a little adjustment here and there, set EX 374 may also be usable for masking the canopies in Classic Airframes1/48 scale Seahawk kits.

Like other Eduard mask sets, this one is made of Kabuki tape (similar to Tamiya’s masking tape) and contains precut masks for the kit’s windscreen, canopy, gunsight, and wheels. The masks will adhere well to any flat or curved surface, so masking is easily accomplished, and the masks can be removed after paining is completed. A simple instruction sheet is included to guide the masking process.

Dragon Models has released the Sexton II Self-Propelled Gun in 1/35 scale. Out of the box, the detailing looks absolutely stunning, even for Dragon. The engineering and detail of the on-board stowage, radio equipment, driver’s compartment, and surface texture is as good or better than any release I’ve seen. Their excellent 25-pdr Mark II main weapon has been pulled from a previous release, and the chassis contains all the good stuff from their equally superb Dragon Models M4. The Commonwealth makeover of the U.S M7 Priest sports over 150 new parts, including a completely reworked driver’s compartment and transmission, radio sets, ammunition lockers, etc. An engine is not provided, but everything that is exposed is brilliantly represented.