“The Ferdinand was intended to supplant previous light panzerjägers, such as the Marder II and Marder III, in the offensive role. A similar gun was used in the lightly armored Hornisse (later known as Nashorn) tank destroyer, built at the same time.
“A German World War II super-heavy tank completed in late 1944. It is the heaviest fully enclosed armored fighting vehicle ever built. Five were ordered, but only two hulls and one turret were completed, the turret being attached before the testing grounds were captured by advancing Soviet military forces.
he principal problem in the design of the Maus was developing an engine and drivetrain which was powerful enough to adequately propel the tank, yet small enough to fit inside it. The Maus was too heavy to cross bridges. As a result, an alternative system was developed, where the Maus would instead ford the rivers it needed to cross.
“The M3 Stuart/Light Tank M3, was an American light tank of World War II. An improved version of the tank entered service as the M5 in 1942 to be supplied to British and other Commonwealth forces under lend-lease prior to the entry of the U.S. into the war. Afterwards, it was used by U.S. and Allied forces until the end of the war.
Although the main criticism from units using the Stuarts was that it lacked firepower, the improved M5 series kept the same 37 mm gun. The M5 gradually replaced the M3 in production in 1942. Total M5 and M5A1 tank production was 8,884; an additional 1,778 M8 75 mm howitzer motor carriages based on the M5 chassis with an open-top turret were produced”.
A new release from prolific AMMO by Mig Jimenez, is this three-color acrylic paint set labeled for the three tone NATO camouflage. The paint comes in 17ml plastic bottles, complete with a stirring ball, in a clear plastic clamshell box. While the paints can be procured individually, the three major colors are included (and most likely cheaper than buying them individually). The following paints are included:
I am a fan of AMMO acrylic paints and am very impressed with this paint set. While advanced modelers and painters can mix their own colors, basic modelers like myself prefer the easy off-the-shelf solution provided in this set. With the plethora of NATO vehicles wearing the NATO three tone camouflage since the 1980s, there are numerous vehicles waiting to be painted with this easy-to-use solution. The paints are also odorless and non-toxic.
“The M3 Stuart/Light Tank M3, was an American light tank of World War II. An improved version of the tank entered service as the M5 in 1942 to be supplied to British and other Commonwealth forces under lend-lease prior to the entry of the U.S. into the war. Afterwards, it was used by U.S. and Allied forces until the end of the war.
Although the main criticism from units using the Stuarts was that it lacked firepower, the improved M5 series kept the same 37 mm gun. The M5 gradually replaced the M3 in production in 1942. Total M5 and M5A1 tank production was 8,884; an additional 1,778 M8 75 mm howitzer motor carriages based on the M5 chassis with an open-top turret were produced”.
“The M26 Pershing was a heavy tank/medium tank of the United States Army. It was used in the last months of World War II during the Invasion of Germany and extensively during the Korean War.
The M26 was intended as a replacement of the M4 Sherman but a prolonged development period meant that only a small number saw combat in Europe.
The M26 was the culmination of a series of medium tank prototypes that began with the T20 in 1942, and it was a significant design departure from the previous line of U.S. Army tanks that had ended with the M4 Sherman. Several design features were tested in the prototypes. Some of these were experimental dead-ends, but many become permanent characteristics of subsequent U.S. Army tanks”.
"The Type 16 maneuver combat vehicle (MCV) equips designated combat units. Due to its light weight and small size, it is designed for easy deployment (by aircraft if needed) allowing rapid movement on narrow roads and in built-up areas in response to various contingencies. Despite its small size and light armor, it can successfully attack much larger armored fighting vehicles as well as personnel, using its large caliber gun.
Main armament: 105 mm L/52 gun (developed by Japan Steel Works)
Secondary armament: 12.7 mm (0.5 in) M2 Browning machine gun, 7.62 mm NATO coaxial Sumitomo Type 74 machine gun (replacing M2 Browning) Type 96 40 mm Automatic grenade launcher or FN Minimi 5.56 mm NATO light machine gun".
URL: https://en.wikipedia.org/wiki/Type_16_maneuver_combat_vehicle
The heavy Panzerspähwagen was a large but very fast and highly versatile addition to the German Army. The original 6-Rad (six wheel) versions were based on a 6x4 truck with an armoured body, but by 1937 they were being replaced by 8-Rad versions. During the replacement phase, the Sd.Kfz. (Sonderkraftfahrzeug, 'special vehicle') numbers were carried directly over; differentiation was made by the inclusion of 6-Rad or 8-Rad in the vehicle's name.
The Sd.Kfz. 232 was armed with a 20 mm KwK 30 L/55 autocannon. This cannon was based on the 20 mm FlaK 30 anti-aircraft gun, and was capable of firing at a cyclic rate of 280 rounds per minute.
The M8 light armored car was a 6×6 armored car that saw service from 1943 by US and British forces until the end of World War II.
Designed and built by Ford Motor Company it was intended as a replacement for the M6. Because it had tires instead of treads, it had great speed at 55 mph on open roads and was very good in support roles as a recon vehicle. It wasn’t without its drawbacks however. Crews put sandbags on the ¼” thick floor to protect them from mines. It was also awkward in wooded areas and rough terrain.
Exported widely, it was still in service with some countries in 2006.
If you want to bring your M8 model kit to the next level, this excellent photoetch/detail set is just the thing for you. This extensive PE sheet has most of the appliqués that can be added to the kit to provide a fully detailed rendering of the M8.
SM.02 S-65 City Tractor features a civilian-based project created from the excellent 1/35 Trumpeter Stalinetz S-65 Russian Army tractor kit, with a finish that is designed to explore other realms of possibilities. This model will illustrate how a city owned operation might have utilized this one-time military tractor. The finish was heavily influenced by the many worn-out city tractors seen in the great Pacific Northwest.
6.5" x 7.5", 128-page softcover, perfect bound, uniquely designed uncoated Linen cover stock. Interior pages are the same high-quality paper stock as the TANKART books, which helps to create a stylish and cool presentation with tons of character.
If you are interested in building painting and weathering something other than a military vehicle, this book is about a tractor and all the different layers of painting and weathering involved with the process.
