What's New

Review Author
Greg Wise
Published on
Company
JH Models
MSRP
$8.00

The Product

Described as a highly flexible, softened, transparent gray film suitable for uneven surfaces and producing templates for applying paint by a brush or airbrush with reduced surface tack.

The Working Test

I decided that a current review project was to be the test subject, a 1/72 scale Cobra helicopter. I believe the film should be cut by scoring the film and removing it from its backing. I found cutting the film and backing material together a little fussy, even while using a new #11 X-Acto blade. The film is very pliable and stretches easily. The adhesive tack strength is a couple clicks below Tamiya tape.

Book Author(s)
Eric Brown
Review Author
Pablo Bauleo
Published on
Company
Specialty Press
MSRP
$56.95

Eric Brown has flown more aircraft types and performed more carrier landings than any other person, dead or alive. That alone makes him a unique individual. In addition to that, he is actually a good writer. I’ve read several other of his books and I have found them very interesting, easy to read, and almost in the category of “page-turners.” This book is no exception.

This version is an extended edition of the original book, which was focused mainly in carrier-borne World War II airplanes. He added several carrier-based jet airplanes that he got to fly in his extended career, either in the post-war years or during his time at the US Naval Air Test Center.

Review Author
Roger Rasor
Published on
Company
Quickboost
Scale
1/48
MSRP
$8.50

Quickboost now offers a 1/48 scale early-style conversion seat to replace the two-part injection molded seat parts found in the Zvezda Bf-109F-2 kit. The seat provided on the sprues in Zvezda’s kit builds into a replica of what was fitted into the late-model Bf-109F-2 and, to add to the matter, it has a conspicuous ejection pin depression in the center of the pan that must be filled and smoothed out. The Quickboost resin seat represents the earlier style seat that includes an integrated seat back. Quickboost’s seat also offers superior detail than what’s provided in the kit, a thinner profile, a separate armor back plate...and there is no ejection pin cavity that needs filling. Note that the model builder must add seat belts to either seat.

Review Author
Dave Koukol
Published on
Company
Revell
Scale
1/25
MSRP
$24.95

In 1977, the Pontiac Firebird became the rage of pop culture in its strong supporting role in Smokey and The Bandit, and ensuing sales of the Trans Am variant skyrocketed overnight.

Revell does a magnificent job capturing the essence of The Bandit's ride in this re-release of their 2004 tooling of an American muscle car legend.

Molded in white, clear, and chrome-plated styrene with steel axles and vinyl tires, the kit consists of 89 parts and a sheet of decals. Mold quality is very good, with little flash and very manageable mold parting lines. Detail, raised and recessed, is crisp and in-scale, and tracks well to reference photos. The tires are beautifully seamless, and just need to be pressed over their hubs to be display-ready.

Review Author
Dave Koukol
Camden Koukol
Published on
Company
Revell
Scale
1/25
MSRP
$15.95

Well-received by many a soccer mom (and dads looking for a “man van”), the Ford Expedition has also gained significant acceptance and popularity among some American law-enforcement agencies looking for a reliable and rugged vehicle with increased towing, passenger, and cargo capacity.

Revell’s Ford Expedition Police SSV (Special Service Vehicle) provides a fantastic opportunity for young modelers to build an imposing replica of this popular vehicle. Molded in black, clear, and chrome-plated plastic, accompanied by vinyl tires and steel axles, its 46 pieces are well-detailed with crisp raised and recessed features. A sheet of stickers provide marking options for 2 vehicles.

Review Author
Dave Koukol
Camden Koukol
Published on
Company
Revell
Scale
1/35
MSRP
$15.95

Introduced into active service in 1980, the M1 Abrams has served as the United States’ main battle tank for over 30 years, and will continue in that role for the foreseeable future. In production between 1986 and 1992, the M1A1 is an upgunned and upgraded version of the original M1, and has seen service in worldwide, including operations in Iraq and Afghanistan.

Revell introduces young modelers to this mainstay of modern American armored warfare in the form of a 1/35 scale SnapTite kit – and a fabulous introduction it is! Molded in tan plastic, its 56 pieces are well-detailed with crisp raised and recessed features, and are accompanied by 2 pre-joined black vinyl tracks – also nicely detailed. A sheet of stickers provides the vehicle’s markings.

Review Author
Rob Benson
Published on
Company
Zoukei-Mura
Scale
1/32
MSRP
$191.00

Again, many thanks to Mr. Hideyuki Shigeta for honoring me with the privilege of building the Super Wing Series He 219 Uhu (Eagle Owl) model kit for public review as an IPMS Reviewer Corps representative. I am deeply appreciative of the trust and confidence shown in me by both Mr. Shigeta and the IPMS Reviewer staff. I am delighted to report on the next stage of construction: the main wings.

Review Author
John Kelly
Published on
Company
Trumpeter
Scale
1/35
MSRP
$84.95

Background

The Medium Tactical Vehicle Replacement (MTVR) cargo truck was adapted by the U.S. Marine Corps and U.S. Navy as a replacement for the M939 series of trucks that had been in use since the early 80s. It offers improved off-road capability and greater capacity than the earlier models. It is the prime mover for the USMC M777 Howitzer and is used to carry troops, cargo, fuel, and water to every corner of the battlefield.

The MTVR was first fielded in 1998 and is built by Oshkosh Industries. Deliveries are continuing, and so far some 11,000 in 12 different variants have been delivered to the US Marines, the Navy Seabees, as well as the Iraqi and Egyptian armies. The variants include 4x4 and 8x8 versions, along with the standard 6x6 configuration.

Review Author
Eric Christianson
Published on
Company
Dragon Models
Scale
1/35
MSRP
$64.95

Dragon Models has released their third incarnation of the German Sturminfanteriegeschutz 33 self-propelled heavy infantry gun in 1/35th scale. Based on the venerable Sturmgeschütz III chassis, this version of the sIG 33 mounted the improved 15cm infantry gun, offset to the right side, for which 30 rounds were carried. Fielded in 1942, the sIG 33 saw service on the Eastern front, notably in the breakout attempt at Stalingrad late in that year. Only one survived the war and is on display at the Kubinka NIIBT Research Collection in Russia.

Previously released as Dragon #6042 and Cyberhobby’s #9123, this Smart Kit release has been improved upon by the inclusion of two additional photo etch sheets and their wonderful DS track. The new track replaces the individual, clip-clean-and-glue track found in the earlier kits.

Review Author
Mike Van Schoonhoven
Published on
Company
Model Art
MSRP
$22.00

This is one of Model Art Modeling Magazine’s special editions. The text is mainly in Japanese with some English subtitles. One plus about these magazines is the high quality of the photographs and the models that are used.

Are you a fan of 1/700th scale IJN waterline models? Are you looking for that one particular kit? Well, you may be in luck with this special issue released by Model Art Magazine.