The MiG-17 has two prominent pitot tubes on the wing tips. Inevitably, if you are like me, you will knock off one or both of them. Brass pitot tubes will make this harder to do. Included in this set are two pitot tubes, a two part 37mm cannon barrel, and two 23mm cannon barrels.

The pitot tubes are machined perfectly with the proper taper to the tips.

The 37mm cannon is simply gorgeous. Plastic kit makers can only hint at the cooling jacket for the cannon. Master is able to produce a precision machined cooling jacket and barrel. The barrel simply slides precisely into the jacket. Then just prime and paint. A thing of beauty.

The 23mm cannon barrels are different lengths just like the real thing.

My thanks to Scale Aircraft Conversions for offering this item for review and to IPMS/USA for allowing me to review it.

Designed by the Curtiss Aircraft Manufacturing Company, the SB2C was a huge disappointment initially and for months to follow. It was structurally weak, exhibited poor handling characteristics, and was unstable in a number of flight conditions. But, the Navy and Curtiss stayed with the aircraft and made a number of design changes. The changes added nearly 3,000 lbs. to the aircraft and resulted in one of its not so endearing names - the Big-Tailed Beast. Finally the Navy had the plane they wanted. It became the Navy’s primary attack/bombing aircraft and was responsible for more Japanese targets destroyed than any other aircraft.

Bronco models have repacked its Jeep and airborne anti-tank 6 pdr gun, together with 6 figures into this “full meal” boxing. Actually the vehicle has the necessary part to be the airborne variation used to tow the gun, including all the fittings for the ammo boxes.

When you open the box you find 26 (!) sprues –including one clear-, 3 photo-etch frets, and 3 decal sheets, including one for the soldiers rank. You get all the parts needed to model the airborne variation of the Jeep used to tow the gun, including all the fittings for the ammo boxes. You actually get several extra parts in this boxing and maybe you can model other versions of the Jeep, but I am not sure.

The surface detail is impressive, petite yet well defined. The tires even have the maker letterings in raised detail and would look very good under some dry-brushing.

The U-505 was a Type IX C late-war boat completed in 1942 and refitted in 1943. A “hard luck” sub from the beginning for the German Navy, the U-505 was damaged in action, had a captain commit suicide, and finally, was captured by the Americans in 1944…she is now a museum piece at Chicago's Museum of Science and Industry. I went and visited her for this kit build to check details, and found only the bow section to have any rivets left showing. When I inquired as to what happened to the rest, I was told that thanks to the boat’s being out in the Chicago elements for years, they figured they’ve lost up to 70% of the hull thickness. There also were many welded-on patches to hold her together, which looked like big band-aids.

History Brief

The Short Sunderland, one of the most famous seaplanes of World War II. It came into service toward the end of 1938, equipping the Royal Air Force squadrons of Coastal Command. The Mark III turned out to be the definitive Sunderland variant, with 461 built. Most were built by Shorts at Rochester and Belfast, a further 35 at a new (but temporary)[N 3] Shorts plant at White Cross Bay, Windermere;[22][23] while 170 were built by Blackburn Aircraft. The Sunderland Mark III proved to be one of the RAF Coastal Command's major weapons against the U-boats, along with the Consolidated PBY Catalina.