I will be honest, I have not heard of Resin2Detail until about two months ago. I think they are about 1-yr old company and certainly they specialize in aftermarket details for aircraft (32^nd, 48^th and 72^nd) , but visiting their website I’ve found at least one armor item.

This particular item gives you 4 exhausts of the 5-tube plus Siamese connection for the Mosquito engine. Being an airplane made of wood, the 6^th tube needed to be moved away from the engine side and it was connected with the 5^th tube.

All parts are perfectly casted without any imperfection, bubbles or partially molded parts.

As you can see in the pictures, the exhaust tubes are hollow; they have a lip and also have a more oblong and “flatter” shape than the plastic ones. It also includes the Siamese connection for the 6^th tube, which is completely missing in the original plastic part.

This tome appears to be Piotr Witkowski’s first book in English. I’ve found two prior books in Polish: Polskie jednostki powietrzno-desantowe na zachodzie (Bellona, 2009) and a second edition of this book titled: Spadochroniarze Sosabowskiego : Dzieje polskich jednostekpowietrznodesantowych 1939-1945 (Bellona, 2012). Volume 2 has already been scheduled for a 2017 release by Piotr Witkowski that will focus on armament and equipment used in Operation Market Garden.

Kinetics’ 1/48^th scale F/A-18C is a great kit and comes with a good representation of the SJU17A ejection seat. The kit even provides a photoetch generic seat belt. Eduard ups the ante a ton with its release of a color photoetch steel set of belts specifically designed for the Kinetic seat.

The set has one small colorized steel fret with nine pieces for the shoulder/seat belts and two pieces for the leg restraints. All made with multicolor parts. As you can see in the photo, the kit provides a basic lap belt and shoulder harness.

Addition to the seat is easy. There are four sets of lap belts so those get added first. The seat is pretty flat so they slide right into place. Next, add the adjustment straps on top of the four lap belts. Lastly, bend the shoulder harness to fir and glue in place.

To finish, I added a black wash to the seat and then wiped off. A few dry brushed and a flat coat and its done.

This set provides a replacement pitot tube for the Trumpeter Su-24 Fencer kits. The set includes two brass parts and one resin part. The brass parts provide the circular tubes of the front and back of the pitot tube and the resin part replicates the fine vanes and protrusions commonly seen on Soviet pitot tubes.

The packaging for the set is really well thought-out as the brass parts are in separate pockets from the resin part and the resin part is contained in a small foam square that is lined with good sticky tape on the back side to keep the resin part from floating around, which is good as the resin parts are very delicate.

Masking sets first started making their appearance a while back and have been made in several materials including vinyl and tape. Eduard has settled on the kabuki style thin yellow tape for their masking material and makes a wide assortment of masks for many different subjects. I think tape is the best item as it is thin, conforms to the shapes well and provides a good seal.