UMM-USA has provided the reviewer core with a riveting tool for 1/32^nd and 1/35^th scale models.

This is a single row rivet pounce wheel with a rivet pitch (distance between rivets) of 1.10 mm. Its main target use is for larger models of 1/32^nd or 1/35^th scale. The handle is made from a 3-D printer and the filament is colored white and black. An olive-green dot is colored into the handle and correlates to the size on the sheet packaging for 1.10 mm rivet pitch.

I used this tool on a plastic sheet and then darkened it with a weathering wash to bring out the divot locations. I also placed a steel ruler as reference to see the pitch distance between divots.

Conclusion

This is a neat tool to have which will add more detail to your builds by adding fastener/rivet detail to the surface of your larger scaled kit(s).

This is a soft bound book of 26 pages on the Messerschmidt ME 163, Komet. Included is a sheet of decals in both 1/72 and 1/48 scale of the 163 as seen on the front cover. The cover is printed on heavy glossy stock and shows a Messerschmidt ME 163, Werk # 10061 in both top and side view. The book contains little text except for short descriptions of each of the 27 black and white photos that make up the front section of the book. The photos appear to have been taken at an unnamed museum in Europe. There isn’t an author of the book listed. However, the author of the technical drawing that makes up the final section of the book is listed as Marek Rys.

In the Box and Molding Quality

Atlantis Models has re-released the classic Aurora 1:8 scale Blue Knight of Milan figure kit, which originally appeared in 1958. As the current owner of the Aurora trademark, Atlantis included the original box art and period instructions. The kit comprises approximately 35 parts molded in a metallic blue styrene, spread across several sprues, along with the traditional small red feather plume. The molding quality is generally good. Minor flash was present, primarily along the parting lines, but was easily removed during part preparation. Ejector pin marks were either absent or located in areas that would be hidden after assembly.

It doesn’t matter if you are scratch building, converting, or just adding detail to a military vehicle model, you need scale nuts and bolts. Sometimes, you need a lot of them. I have tried just about every technique for making bolt heads with varying success. Salami slicing hex rods resulted in varying thickness and sloping bolt heads. Chiseling off Styrene bolt heads works; but it is difficult to keep them level. I’ve found it nearly impossible to properly position resin nuts and bolts regardless of the type of CA used. So, I was thrilled to get an RP Toolz Hexagonal Punch and Die Set. This tool allows you to punch bolt heads from Styrene strips resulting in perfectly uniform thickness.

Here’s a review coming to you from all around the United States! It turns out that this set toured the US for a year before actually arriving at my doorstep. Seems our Postal Service just couldn’t chock the wheels of that truck…So I was extremely happy and surprised to receive this Wheelliant product.

On initial inspection the detail looks like it will show well in close-up photography. In addition to the diamond pattern on the chocks the lateral lines are very finally crafted and show no signs of residual material in the grooves so they look very crisp.

Turning over the info card you’ll get a surprise, a large set of instructions that’s easy to follow and red as it’s not printed in size 2 font like many are prone to. I thought this was a definite benefit, no matter how simple it seems as so many other manufacturer’s are including no instructions these days.