Plus Model has made a living providing us with little odds and ends of resin to liven up our modeling projects, and this is just such an item. From their Easy Line, the six pieces in the poly bag require minimum work. Molded in gray resin are a table top, 4 legs, and a 3-legged stool. The table is like a kitchen table, with drawers for utensils. It would seem a better choice for a seat would be kitchen chairs, but these are available as a separate kit.

The stool in my sample had all three legs bent over, like someone had taken the stool out of the mold and popped it right in the bag. Looked like a spider that had been stepped on. This would be my first challenge, and after sawing off the resin plug from the stool top, I held the stool under some hot water from the tap. Like a miracle, the legs softened and they straightened out.

The table legs were not a tight fit, so I used 5-minute epoxy. This gave some wiggle room to make sure all legs were aligned.

I was recently given the new 1/48 Kitty Hawk F-94C Starfire to review. I think this is a very nice kit, especially considering that it is the first release by this company. When looking at the parts I was impressed by the detail of the landing gear.

No sooner had this kit hit the market, when Scale Aircraft Conversions released a metal landing gear that not only adds weight to the nose of the aircraft but also corrects a minor error in the kit landing gear.

The kit landing gear, while very nice, represents the legs at full compression. This is not correct. SAC has chosen to represent them as the real aircraft sits, which will alter the stance of the kit. The oleos are not fully compressed and look just right.

I have consulted some photos I have of the F-94C as seen at the Pima Air Museum in Tucson and the one at the USAF Museum in Dayton, Ohio, and they both have the oleos extended slightly but not fully. The SAC L/G legs are spot on.

I have used many sprue cutters from a lot of different companies, all with different designs, for many years, and this is the first time I have tried this design. I was a little skeptical at first, but these have turned out to be quite nice.

The tweezer design is nice and easy to hold. The ergonomic design makes them very user-friendly. I love the way the head is shaped, the extension of the cutting head making it easy to fit into tight spots. The cutting heads are very sharp, so beware.

As for using, just put the head against the part you want to cut off and squeeze. You get a nice clean cut with very little cleanup afterwards. This works great for small parts. When it comes to the larger ones, you really have to squeeze, and I mean squeeze, hard. I had to resort to my other cutters for these.

With the release of HK Models’ 1/32nd B-25, it didn't take longer for the aftermarket companies to step in and start producing detail sets. Profimodeller is one of these and they have come up with some really nice stuff. So far, they have released 9 different detail sets, all at a very reasonable cost. I have ordered the additional sets from Profimodeller's website and found it quite easy to use. They are very helpful in answering questions and quick to respond (please note the time difference, you are dealing with Czechoslovakia). I used Pay Pal for payment and received my goodies in a week.

This will be a "First Look" type review. I will be building a B-25 and incorporating the set in the build, but it's going to take a while.

The Su-33 Flanker D is an all-weather-carrier based air defense fighter based on the Su-27. The airplane had a production run of 24 units.

Hasegawa has produced a kit of this interesting aircraft for modelers. As usual, Quickboost has added several items to improve the accuracy of the basic Su-33 Flanker D kit.

The first part is a correct nose cone. The attached photo shows the Quickboost part compared to an Su-27 from my collection. The new cone is the correct shape for the model and is interchangeable with the kit part. It is molded in cream colored resin. It is smooth, seamless and bubble-free.

I highly recommend this product if you want a really superior-looking model. Since this part is interchangeable with the kit parts, it can be recommended for all levels of modelers.