The MiG-19PM is the missile version of the short lived MiG-19 family. The PM had four pylons which allowed the aircraft to fire beam riding AA-1 missiles.

This set is packaged in a Ziploc bag. There are five parts in the package. The large pitot tube is beautifully rendered out of turned aluminum. There are four turned brass missile rails that are designed to fit on the front of the missile pylons. These will hang out the end of the pylons so you know they will break off during handling, unless you replace them with these metal extensions.

So you have an easy to install upgrade for a reasonable price. This simple and effective upgrade offers strength and perfectly round cross section with minimal work. What more can you ask for? The set is indicative of the quality that I’ve come to expect from Master. Another winning product.

Highly recommended

Thanks to Master and IPMS/USA for the review copy.

Master Model continues to “turn” out metal details for the model maker. Here they are offering the static discharge whips that you see on all high performance Eastern Bloc built jets. You know - the ones on the trailing edge of the wings and tail surfaces that, if they are molded, quickly snap off never to be seen again. Plus molded discharge whips are often out of scale. Previously I stretched sprue and then quickly exposed the tip of the rod to heat to cause it to mushroom slightly. This is a good solution except the whips always were too big and quickly snapped of at the slightest touch.

History

The 056 Class patrol ship replaces the older 037 Class and was first suggested in the 1980’s but did not emerge until 2012. The ship is a thoroughly modern design with a modular hull featuring stealth properties. It weighs 1,400 tons fully loaded and has a length of 89 meters and a beam of 11.6 meters. Power is provided by 2 marine diesel engines giving a maximum speed of 28 knots and a range of 6500 kilometers. A mixed armament is carried consisting of a 76mm gun, 4 x YJ-83 anti-ship missiles, 10 x HQ-10 SAM missiles and 6 torpedo tubes. The rear deck has a helipad to operate small to medium size helicopters. A total of 20 ships have been ordered for the PLAN, and the type has been offered for export with a different hull and armament options.

With any jet the most obvious thing about the cockpit is the ejection seat. If you were to do anything to improve the look of your model cockpit then just add an ejection seat or two in this case.

Packaged as usual for Quickboost in a self sealing package with card board backing sheet this protects the parts while still allowing you to see them. This set has two seats with molded on seatbelts. The resin pieces are molded on pour blocks that will be easily removed. They are flawlessly cast in light grey resin. The belts are perfectly draped and look very realistic. I could find no flaws. There was a little bit of resin that will have to be removed from the seatbelt as it is draped realistically, but to cast it there is a very, very thin membrane of resin that will need to be cleaned up. It will take less than a second to do it. It is not a flaw but designed that way.

The Kit

This automotive model review covers the 1940 Ford Fire Chief Car 1:25 scale MPC kit #815/12. The copyright date on the inside of the body is 2014 although kit has been released before. This is a Skill Level 1 “Snap-It” kit for modelers eight years and older. It includes parts molded in red, tan, and black with chrome, clear and transparent red parts and waterslide decals.