What's New

Review Author
Frank Landrus
Published on
Company
Werners Wings
Scale
1/48
MSRP
$9.00

The latest from Werner’s Wings provides an external auxiliary fuel tank for any 1/48 USMC AH-1W, AH-1Z, UH-1N, or UH-1Y kit. Floyd Werner provides great instructions showing exactly how to assemble the three parts along with color photos of various options for installation. A re-sealable zip lock bag holds the parts and the instructions.

Werner’s Wings has molded the external auxiliary fuel tank in grey resin with only a few minor bubbles. According to his website, the external auxiliary fuel tank is designed to be supplied on a resin sprue, but the kit as received has had the sprue already removed from the tank. The two other parts are supplied on a short resin sprue and will need to be detached with a photo-etch razor saw. I used a #73 drill bit to open up the mounting holes a bit and secured the parts with superglue. The connecting hoses are not supplied and will need to be scratch-built.

Review Author
Jim Pearsall
Published on
Company
Brengun
Scale
1/144
MSRP
$6.25

This little accessory is an add-on for the older 1/144 Hellcat kits. It contains two resin fuel tanks, plus a PE fret with the extra mounting hardware you don’t find on kits from the 20th Century.

I started out the project with the Platz 1/144 Hellcat. But after I assembled the Platz fuel tank, I decided that it was pretty close in appearance to the Brengun, so I went to a less detailed kit. In this case, I had a choice between the Revell F6F5 and the AHM F6F5. I chose the AHM kit for no other reason than it was the easiest to find in my stash.

I built the kit, painted it and applied decals before installing the fuel tank. I also painted the tank as I built the kit. I left the prop and landing gear off the plane until the tank was installed.

Review Author
Frank Landrus
Published on
Company
Aires Hobby Models
Scale
1/48
MSRP
$13.50

Aires has come out with a nice upgrade for the Eduard Fw 190A series of kits with their horizontal control surfaces set. The Aires parts allow you to alter the position of the elevators and provide improved stabilizer to elevator detail. There are no supplied instructions; you simply swap out the kit provided plastic parts with the new Aires replacements. I’ve included photos of both the Eduard and the Aires horizontal surfaces inserted in the Eduard fuselage. The gap on the bottom view is artificial as both the Eduard and the Aires parts are leaning up.

Aires has molded the stabilizer and elevator perfectly in light grey resin with no apparent bubbles. The Aires stabilizer and elevator are supplied on a single resin sprue with thin resin attachments to the parts that should minimize any cleanup.

Review Author
Rod Lees
Published on
Scale
1/48
MSRP
$33.00

First: Sincere thanks to Lucky Model for sending us this most excellent kit, and thanks also to IPMS USA leadership for once again believing in my ability to deliver within a deadline….

OK so almost to the year I have the FRS 1 kit in hand; it really is great to have a new, accurate and easy to build Sea Harrier (SHAR) on hand. Let’s begin…

The basic kit is the same as the FR 2; in the box, there are more external stores, and a decal sheet to be savored. If you really want to build every SHAR you have the decals to do it. Check out the scan… Cartograf manufactured, CROSSDELTA designed. VERY WELL DONE!

Like last year, it was pleasant to have minimal aftermarket to deal with and have a great result. This time, instead of metal gear, I found a Martin Baker Mk 10 seat appropriate for the SHAR, and did the slight modifications to fit. The basic cockpit is more than sufficient for a closed canopy, but the resin seat sealed the deal.

Review Author
Paul R. Brown
Published on
Company
Quickboost
Scale
1/72
MSRP
$5.00

Like many Aires/Quickboost sets, this set is a drop in replacement for the kit supplied control stick for the Airfix A-4B/P Skyhawk. The set actually includes 3 sticks, so you will have enough for three single-seat Skyhawks or a single-seater and a TA-4 two-seater.

The stick is nicely detailed and paints up very well. While the resin is not flimsy, be careful in handling the stick once it is removed from the pour stub as I managed to snap one of mine in two and had to repair it with superglue.

Review Author
Dick Montgomery
Published on
Company
Xuron Corporation
MSRP
$38.00

Xuron offers an excellent set of hobby tools, cleverly disguised as ‘Field Service Tools’ for electricians and technicians. This set is presented in a fabric pouch, which has three pockets for the tools, and two additional pockets to store a ruler, a set of files, picks, scribers, and other small hand tools.
Xuron’s description of the product: “The tri-fold pouch includes a Model 410T Micro-Shear® Flush Cutter with a refined tip for access into restricted areas, Model 440 Mini-Scissor for slitting cable jacketing, and the Model 450 Tweezer-Nose pliers for tightening pins, forming connectors or holding wires.”

For the hobbyist it might be more beneficial to identify the tools in this fashion: The Model 440 Mini-Scissor can be used to snip PE parts from the carriers, as well as those tiny plastic parts from their carriers without damage to the parts.

Review Author
Dick Montgomery
Published on
Company
Lifelike Decals
Scale
1/48
MSRP
$14.00

Lifelike produces excellent decals and, specifically, excellent coverage of the “Jug”. This particular item is Part 8 in the Lifelike coverage of markings for 1/48th P-47s. The other P-47 sheets are 48-045, 48-024, 48-014, 48-011, 48-010, 48-009, and the original 48-008. Clearly, if you are building a bubble top or razorback P-47D, Lifelike has you covered.

This sheet of decals provides markings and stencils for three aircraft. I chose to use the decals for the aircraft flown by Capt. Charles H. Anderson, 335th FS/4th Fighter Group. The nose art features “Hell’s Belle”. Markings are provided for the aircraft of Maj. Charles F. Matheson, 394th FS/367th FG and Capt. Marvin E. Grant, 342nd FS/348th Fighter Group.

Review Author
Jim Pearsall
Published on
Company
Airfix
Scale
1/144
MSRP
$18.99

The Comet was the basis of the rebirth of the British civil aircraft industry after World War II. Development began before the war ended, but the first comet didn’t fly until 1949. The Comet 1 had a serious problem, however. About a year after the first commercial flights began in 1952, Comets began breaking up in the air. The problem was traced to the repeated pressurization and depressurization of the fuselage, which caused metal fatigue. The square windows provided a focal point for the stress, and the fuselage would rupture at the window corner. The eventual fix was to make the windows oval, with no corners. The Comet 4 was the model with this fix. The last Comet flight was in 1997. The Nimrod, a reconnaissance and ASW version of the Comet remained in RAF service until 2011

This is a reissue/rebox of the 1960s Airfix Comet 4B airliner. It also has new decals and instructions.

Review Author
Dick Montgomery
Published on
Company
Aires Hobby Models
Scale
1/48
MSRP
$6.00

Aires offers a myriad of after-market parts, this being a new offering. Designed for the Italeri kit I wanted to experiment a bit to see how the parts fit on the Hasegawa kit.

The first step is to remove the Aires parts from the part carrier. This is easy to do and quite safe as the parts are not delicate. I used a Xuron part nipper to remove the parts from the carrier, trim away any flash, and then also to cut the six exhaust ports into 3 units of two ports each. That division is required to get the Aires parts to drop into place on the Hasegawa kit. As you can see in the accompanying images, the parts fit nicely and without issue.

Book Author(s)
Marek Radomski
Review Author
Paul R. Brown
Published on
Company
Mushroom Model Publications - MMP Books
MSRP
$35.00

This is a new publication from Mushroom Models Publications. The book includes a brief description of where and how the Polish Air Force acquired its MiG-29 fleet. I was surprised to learn that only the first twelve aircraft were purchased directly from Russia. The bulk of the PAF’s MiG-29’s were actually acquired from Czech Air Force and from the German Air Force (post reunification) when those services decided to cease operating the MiG-29. Interestingly, upon acquiring these used jets, initially the PAF continued to operate the aircraft in the paint schemes of the original operator, so a number of the PAF single-seat MiG-29s operated for a period of time in several shades of green and brown. In 1997, the PAF commenced the overhaul of its MiG-29s.