Review Author
Floyd S. Werner Jr.
Published on
August 24, 2018
Company
Scale Aircraft Conversions
Scale
1/35
MSRP
$18.95

The Trumpeter helicopters are really nice kits but the kit’s white metal landing gear are very fragile. They are brittle and break apart. I’ve had this issue with the CH-47D and Mi-8 kit landing gear. Scale Aircraft Conversions offers a replacement set of white metal landing gear for the Hip.

This set includes nine white metal parts for the landing gear. They are direct replacements for the kit landing gear. They are packaged in a cardboard backed blister pack. The detail is nicely represented and should prove no problem for adding them to the kit.

They are not brittle like the kit parts. Some parts will need straightening as they got slightly bent during shipping.

These are a nice addition and stronger than the kit landing gear. These are a perfect replacement for the brittle kit white metal landing gear. This is another great release from Scale Aircraft Conversions. I hope that they make landing gear for the CH-47A and D.

Highly recommended

Review Author
Floyd S. Werner Jr.
Published on
August 24, 2018
Company
Eduard
Scale
1/48
MSRP
$14.95

The Tamiya Bf-109G-6 allows a lot of options. One option that isn’t included is the WGr-21 Rocket system. The mortar rockets were mounted under the wings of the Bf-109, from the G-2 to the G-6.

This set is packaged in a typical blister pack with 16 light grey resin and one photo-etch fret. The resin is molded in light grey and dark grey not that it matters as both styles are beautifully done. The weld mark on the tubes is awesome.

The fret is made up mostly of templates to first set the angle of support struts and second to then set its location on the wing. The assembly of the set is pretty straightforward once you get the templates made up. You get two separate rockets for your diorama and two rockets to be ‘installed’ in the tubes. The photo-etch parts for the rocket tubes are mostly for the rear of the rockets.

Review Author
Floyd S. Werner Jr.
Published on
November 12, 2020
Company
Eduard
Scale
1/48
MSRP
$7.95

The Tamiya Bf-109G-6 has that beautiful engine that can be shown opened or closed. My question was they lead the world in engineering kits, can’t they hollow out the exhausts? Apparently not. So that is where this set comes in.

Eduard provides the answer. Packaged in the typical Brassin blister pack, Eduard provides you with some spectacular exhausts to replace the kit parts. Two light grey resin set of exhausts are included, as well as, a fret of photo-etch. They have beautiful weld lines and are hollowed out. They also are specifically designed for the Tamiya kit. The mounting points on the engine are sided and so are these beauties.

The photo-etch parts are for the deflectors and the front and rear deflectors.

The instructions are printed on a single sheet of double-sided paper.

Review Author
Andrew Birkbeck
Published on
August 24, 2018
Company
Tamiya
Scale
1/48
MSRP
$30.00

Background

One can put up a legitimate argument that the M4 Sherman series of tanks was the most important Allied tank of the Second World War. The initial Shermans that rolled off the production lines in large numbers had what was known as VVSS (Vertical Volute Suspension System) with two road wheels per bogie. These tanks (M4, M4A1, M4A2, M4A3, M4A4) also operated as their main armament a short-barreled 75mm gun. As WW2 progressed, and reports from the fields of battle suggested the need for various “upgrades”, the Sherman series underwent a number of small and major changes. Late in the war, there were two major changes: the introduction of HVSS (Horizontal Volute Suspension System) which incorporated four road wheels per bogie for a better vehicle ride, together with a larger turret needed to house a larger 76mm main gun. The new designation for Shermans sporting these two major changes added “E8” to the end of the Sherman nomenclature.

Review Author
Allan Murrell
Published on
August 24, 2018
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$16.95

This is a white metal landing gear set is to for the AFV Kit IDF F-CK-1C/D 1/48th Scale aircraft.

The white metal parts are good are have better-defined details than the original kit parts. They are a very good replacement for the already well details kit parts. The advantage is these white metal parts will provide more strength than the kit parts. The parts included replacing the parts E40, E11, E42, E36, E17, E15, E44, E13, and E46. I did expect to see replacements for E 34, E 37 and E33 but these were not included and it would have added more to this set.

The parts are well cast; you do need to sand off the few cast seams and metal pour points. The parts were a perfect fit to the existing mount and were easy to assemble. A couple of the metal parts were a little bent but very easy to correct.

I recommend these parts are a great addition to an already extremely well-detailed kit.

Review Author
Rob Booth
Published on
August 24, 2018
Company
Twobobs Aviation Graphics
Scale
1/48
MSRP
$14.00

If you build modern aircraft subjects, you’re no doubt already familiar with Two Bobs Aviation Graphics decals. Owner Bob Sanchez is a USAF vet who has put in plenty of time around modern jet aircraft. His firm produces some of the best quality decals available for unusually marked and typical line examples of modern aircraft subjects.

The subjects of this set are two Block 40 F-16Cs from the 36th FS of the 51st FW based at Osan AB, South Korea. The first example is an F-16C Block 40, s/n 89-2043, specially painted to celebrate the Centennial of the “Flying Fiends” in October 2017, with two red “swooshes” and checkerboard graphics on the vertical stabilizer and checkerboard accent graphics on the rear fuselage canards. The second example is an F-16C Block 40 line bird, s/n 88-0540, sporting the typical squadron markings from April 2008 of a redfin stripe, galloping mustang graphic and a black checkerboard band across the vertical stabilizer.

Review Author
Floyd S. Werner Jr.
Published on
August 24, 2018
Company
Furball Aero-Design
Scale
1/48
MSRP
$27.99

The USS George H.W. Bush is the latest aircraft carrier in the US Navy arsenal. The carrier was deployed in 2017 as the flagship of Operation Inherent Resolve. On its decks were the many variants of the F/A-18, in the guise of the C, E, and F as well as the EA-18G. Furball Aero-Design has gathered this information and provided it to the modeler.

The decals are packaged in a large ziplock. They are printed by Cartograf so you know they are world class decals. The colors are in perfect register with good color saturation. My decals were so large that I couldn’t seal them. I cut the bottom and top of the sheet to make it fit the packaging.

Review Author
Rob Booth
Published on
August 24, 2018
Company
Twobobs Aviation Graphics
Scale
1/72
MSRP
$14.00

If you build modern aircraft subjects, you’re probably already familiar with Two Bobs Aviation Graphics decals. Owner Bob Sanchez is a USAF vet who has put in plenty of time around modern jet aircraft. His firm produces some of the best quality decals available for unusually marked and typical line examples of modern aircraft subjects.

The subjects of this set are nineteen examples of B-2 “Spirit” stealth bombers of the 509th Bomb Wing, stationed at Whiteman AFB, MO. They include the “Spirits” of America, Arizona, Indiana, Ohio, Texas, Missouri, California, South Carolina, Washington, Kansas, Nebraska, Georgia, Alaska, Hawaii, Florida, Oklahoma, Kitty Hawk, Pennsylvania and Louisiana, each with their distinctive gear door graphics markings. There are only 20 B-2’s in the USAF inventory, and one is assigned to testing duties. So this set allows you to model any of the current inventory stationed at Whiteman.

Review Author
Floyd S. Werner Jr.
Published on
August 24, 2018
Company
Eduard
Scale
1/48
MSRP
$16.95

No doubt the Tamiya Bf-109G-6 is an impressive kit right out of the box. But what if you want something more impressive? Well help comes from an unexpected source, Eduard. As the Tamiya kit is in direct competition with Eduard’s kit I was surprised by the amount of detail set that Eduard offered to upgrade the Tamiya kit.

This set is packaged in a standard blister pack that Brassin item typically packaged in. The parts are held in place by foam. The six resin parts are molded in light grey resin with no blemishes anywhere. The detail is impressive. The hardest part is removing Part 91. It is very delicate so be careful when removing it. There is a fret of brass photo etch pieces. It contains five pieces. The instructions are easy to understand and are on a single page.

Review Author
Floyd S. Werner Jr.
Published on
August 24, 2018
Company
Master Model
Scale
1/48
MSRP
$7.00

The Do-335B-2 Zerstrorer version of the late war German fighter plane had two wing-mounted 30mm cannons in addition to the standard 30mm armament in the nose.

Master has provided some remarkable parts to replace the kit ones. Packaged in the standard card stock backed zip lock baggie. The individual items are packaged separately to ensure that they are safe from damage. The set comprises two resin pieces, the muzzle flash suppressors, and seven beautifully turned brass parts. There are two cowl-mounted 30mm barrels, as well as the wing mounted ones which the flash suppressors are fitted to. A pitot tube is included along with a FuG-25 underwing antenna. The propeller blast tube is also included and makes this set very complete.