Zimmerit was a paste-like coating used on German armored fighting vehicles between December 1943 and October 1944. It was used to produce a hard layer covering the metal armor of the vehicle, providing enough separation that magnetically attached anti-tank mines would fail to stick to the vehicle. This 5x10 inch sticker sheet enables easy reproduction of zimmerit on the Tamiya #35353 1/35 scale German Assault Tank IV Brummbar Late Production. There are 48 red outlined stickers on this sheet that need to be cut out, pealed from the backing and applied to the model. The stickers are a little thicker then decals and cut very easily with a sharp X-Acto blade. I also used my photoetch scissors to cut a few decals. A metal straight edge helps making the longer cuts. There is some extra zimmerit coating printed on this sheet for repair needs.

I am using this sheet on the new Tamiya Brummbar for a separate review.

The Bf-109F had three different types of seats throughout its development. One being the early style similar to the style of seat in the Emil but completely different. It was more representative of the style of seat used in the Bf-110. Then the seat moved towards what we are familiar with but with a different backplate. This was short lived and the familiar backplate that would be in the Gustav was the final version.

With the release of the Bf-109F-2 from Eduard, they have added this early style of seat. Some of the most famous aircraft, such as Galland and Molders, have the early style of seat.

Italeri recently started producing a line of 1/56 scale AFVs and figures. This might be an unusual scale for most model builders, but is a fairly common wargaming scale equivalent to the 28mm scale. The Soviet KV-1 tank kit is one of their newest kits that also promotes the on-line video game, World of Tanks®.

The Kliment Voroshilov (KV) series of heavy tanks came as a surprise to the German army at the start of Operation Barbarosa. The tanks proved to be nearly impenetrable to all the German anti-tank weapons, other than the 8.8cm gun. The KV series featured heavy armor, and strong weaponry, with the KV-1 fielding a 76mm gun, and the KV-2 fielding the 152mm howitzer. The Soviet tanks so outclassed their German counterparts, that there were instances where a single KV tank, with supporting infantry, was able to hold off entire German columns in the early part of the war.

Osprey Publishing has recently released a very interesting book covering the history of RAF and Commonwealth aircrews shot down behind enemy lines and their escape stories.

The book is neatly organized in the following chapters

• The Escape and Evasion Organization
• North-West Europe
• Middle East and Mediterranean
• The Far East

The first chapter describes the whole organization (MI-9) being setup in the early years of the war charged with establishing escape routes and networks for any personal behind enemy lines (not only for aircrews). In addition of setting up escape routes, this organization was in charge to develop escape aides, tools and supplies, which were part of an ‘escape kit’ provided to armed personnel. Some of the escape aids included miniature compasses, pictures of the themselves (for fake IDs, maps, et).

Eduard has issued this nice photoetch set for IBG Model’s newly released Scammell Pioneer SV2S Heavy Breakdown Tractor. IBG’s kit has very good detail, and Eduard provides many additional details to improve the quality of the model.

The photoetch is up to Eduard’s high quality standard, but there are many very small parts to deal with. I could assemble all the photoetch using super glue, and did not find soldering to be necessary. The photoetch seems to be very thin, and several pieces broke when I tried to bend them. Experience working with photoetch is highly recommended for this set. The use of a bending device tool is also very helpful for this set.

To add PE to a model, I go through the kit instructions and mark those parts that are modified by the photoetch so it can be incorporated in the normal assembly sequence. The Eduard instructions are quite clear and use different colors to designate replacement PE parts, kit parts, or areas to be removed.