Book Author(s)
Robert E. Bradley
Review Author
Hub Plott
Published on
March 17, 2014
Company
Crecy Publishing, Ltd.
MSRP
$39.95

This book is a follow on companion book to the author’s “Convair Advanced Designs that I was also fortunate to review for IPMS/USA! This book covers 41 different aircraft, some that were built and some that were only designs each is given its own chapter.

The list of aircraft covered is as follows:

Review Author
Rod Lees
Published on
March 17, 2014
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$17.95

The usual comments of appreciation to Ross at SAC for continuing to provide us review items; we at IPMS USA sincerely appreciate your contributions!

Unlike other landing gear on kits, Kittyhawk have provided a sturdy but complex design to emulate the actual landing gear on the Mig 25. If you have ever worked on or around Russian gear, you know that it is built like a tank, but sometimes can be a bit complicated. The Mig 23 comes to mind, but surprisingly the Mig 25 main gear is ALSO a complex assembly.

Review Author
Marc K. Blackburn
Published on
March 18, 2014
Company
Roden
Scale
1/72
MSRP
$19.99

Roden continues with their line of 1/72 Opel Blitz truck kits in 1/72 scale. The Opel Blitz was one of the most popular three ton trucks produced by the Germans during the Second World War. Manufactured in a 4x2 and 4x4 version, this kit represents the last production model of the truck. Rather than using sheet metal throughout the vehicle, the cab was manufactured from wood. Production continued until 1948 with a production run of 11,000 vehicles.

The kit is molded in light grey plastic in three sprues with 115 parts. There is a sheet of Mylar for the three windows and there are decals for one vehicle. The parts are crisply molded and there are many small and fragile parts that must be removed from the sprues very carefully. Try as I might, the drive shaft, snapped and flew across the room. I was able to retrieve the two broken pieces. The kit does include an engine with many small components.

Review Author
Charles Landrum
Published on
February 10, 2020
Company
Iliad Design
Scale
1/48
MSRP
$12.00

I have to respect Iliad Design in Canada, which does not follow the convention of releasing decals just for kits new out on the market, but instead releases subjects off the beaten path. This latest release is a series of markings for the US Navy’s version of the T-33, the TO-2/TV-2. The T-33 was an initiative by Lockheed to develop a trainer from its P-80 fighter. Debuted in 1948, the T-33 was immediately bought by the US Air Force and proved to be iconic aircraft which still soldiers on today in many Air Forces. The Navy, which had acquired the P-80 (Navy designation TO-1) for evaluation, also had a need for two-seat jet trainer and acquired 650 of the planes by way of the US Air Force. In Naval service it was at first designated the TO-2 and later the TV-2. The T-33/TV-2 is a forgiving and stable platform and the Navy soon pushed these two-seaters into other roles such as drone aircraft controllers and chase aircraft for test and evaluation programs.

Review Author
Grace Deck
Jim Deck
Published on
March 18, 2014
Company
Round 2 Models
Scale
1/25
MSRP
$29.99

Straight out of 1984, look out Zuul, it’s the Ghostbusters ECTO 1! Well actually it’s the 1/25 snap assembly kit from Round 2 Models but it’s just as cool as the full size version. The kit consists of 54 Plastic parts, 4 screws, 2 metal axles, decals and stickers, and finally a simple 4 step illustrated manual. The detail is good enough and the chrome parts look great.

Grace and I made the decision in the beginning to tackle this without the use of any special tools. This meant sprue cutters, scissors, paint brushes, and acrylic paints. All things we guessed the average young modeler probably has access to. Oh, and don’t forget to cover moms kitchen table.

Review Author
Hub Plott
Published on
March 18, 2014
Company
Model Art
MSRP
$16.78

From the title one could conclude that the entire magazine is dedicated to these two ships. That would be incorrect! The book also covers the IJN Yuikaze, USS Ticonderoga, IJN Noshiro, Ice Breaker Shirase AGB 5003, JMSDF PG-824 Guided Missile Patrol Boat, JMSDF Defense Ship Akizuki, IJN Tanker Ashizuri, IJN Hiryu, S-100 German fast Attack and a section on the old Monogram/Revell 1/506 USS New Jersey! Eleven of the models are in 1/72 scale, two are in 1/350th and another in 1/72.

Since the text is entirely in Japanese, so unless you read kanji the magazine is only for the pictures. But there are a lot of pictures and much useful information to be gained from them. Some of the ships are both photo essays of the model and the building process; others are of just the finished model. All of the models are stunning in detail and appearance, the model of the Hiryu especially so.

Review Author
Dave Morrissette
Published on
January 16, 2022
Company
Master Model
Scale
1/48
MSRP
$5.50

Master Model from Poland makes turned metal parts for ships and aircraft. They can be used for replacements or, more importantly, improvements. The set reviewed here is for Trumpeter’s 1/48 RA-5C Vigilante kit. The set consists of two turned brass parts to replace the AOA sensor and pitot tube. The parts come in the usual pouch, and have a nice set of instructions. You will have to drill a small hole for the AOA sensor.

There is a great picture of the pitot here.

Review Author
David Horn
Published on
March 20, 2014
Company
Aires Hobby Models
Scale
1/48
MSRP
$21.50

This F4U-4 Corsair cockpit set is packaged in the typical Aires style, coming in a sturdy plastic package with foam backing, along with instructions tucked in between the cardboard back and plastic. My first impression was of how crisp the detail is on the cockpit sidewalls and bulkheads. Also included is a photo etch fret and colored instruments on clear plastic. Mold release agent is non-existent on the parts; however, I still recommend washing the resin before use.

Review Author
David Horn
Published on
March 20, 2014
Company
Aires Hobby Models
Scale
1/48
MSRP
$21.50

This F4U-4 Corsair wheel bay update set is packaged in the typical Aires fashion, coming in a sturdy plastic package with foam backing, and instructions tucked in between the cardboard back and plastic. My first impression was of how crisp the detail is on the wheel bays, as well as the gear doors. Mold release agent is non-existent; however, I still recommend washing the resin before use.

Compared to the Hobby Boss kit parts, which are decent, the Aires wheel bays are very sharp and have more details, such as more pronounced ribs and wiring. The landing gear door’s interior and exterior surfaces show very few differences between the Hobby Boss kit parts and the Aires replacements, with the exception of the superior detail on the interior surface of Aires’ small forward landing gear doors.

Review Author
Dave Morrissette
Published on
March 21, 2014
Company
Moebius Models
Scale
1/6
MSRP
$54.99

Danger, Danger Will Robinson… Moebius Models has come to the rescue of all those living in our past and loving Lost in Space. Their latest release, in beautiful 1/6 scale, is the original bubble headed booby, the B-9 Robot which played such a huge parts in the series. The robot itself was played by Bob May and voiced by Dick Tufeld. If you are my age, almost everyone I know remembers at least one of the robot’s lines. The B-9 Robot may be one of the two most famous robots in TV and movies, along with Robbie.

Let’s dive in and look at the kit. The basic parts for the kit are done in a medium-soft gray plastic, and are comprised of seven sprues and four torso parts. Two clear sprues are also included, along with a small photoetch fret and a decal sheet. Last, there are eight gray vinyl parts for the arms and rubber portions of the legs. The kit’s molding is very nice, and there is a nice instruction sheet included with it.