Book Author(s)
Norman LR Franks
Review Author
Paul Mahoney
Published on
August 15, 2012
Company
Crecy Publishing, Ltd.
MSRP
$12.95

This book is, as the title implies, the story of Adolph “Sailor” Malan. From the imprint information, this appears to have originally been released in 1980, but this particular edition was published in 2011.

While this is not a research/reference type of book per se, it is a good read for anyone interested in one of the RAF’s premier pilots during WW2. It is nice to take a break from the mechanics of line drawings, measurements, paint schemes, and the like, and delve into some of the human personalities involved in the conflict from which many of us model machines.

This book very briefly covers Malan’s time growing up in South Africa, and his time as a naval cadet and subsequent 8 years at sea. (This would be the source of the “Sailor” moniker). It then quickly moves into his transition to the RAF, completing his training in 1937 and being posted to 74 Squadron.

Review Author
Floyd S. Werner Jr.
Published on
August 15, 2012
Company
Quickboost
Scale
1/48
MSRP
$6.50

With the release of the Encore (upgraded Monogram) A-37 there is renewed interest in this little dragonfly. The kit is really nice, despite its age.

Perfectly molded in light grey resin these two gun barrels have the shrouded miniguns inside of thinned fairings. The addition of these little jewels will add to the look and aid you from having to clean up a seam on the shroud. This will ensure the shroud is round. You’ll also have hollowed out gun tubes inside of the shroud.

Highly recommended.

Thanks to Aires and IPMS/USA for the review copy. You can obtain yours by contacting www.modelchoice.net or your local hobby shop or online retailer.

Review Author
Floyd S. Werner Jr.
Published on
August 15, 2012
Company
Quickboost
Scale
1/48
MSRP
$6.50

These two piece exhausts are perfectly molded in light grey resin with six very thin exhaust stacks. There isn’t a lot to say in a review about these pieces. They are perfectly cast, drop in replacements for the kit parts and hollowed out to perfection. I know I could never hollow them out as good as Quickboost without ruining most of the tubes. So for that reason alone these are a great investment.

The packaging doesn’t say it but I’m sure you could make these fit your Hobbycraft or Hawk kit as well.

Highly recommended.

Thanks to Aires and IPMS/USA for the review copy. You can obtain yours by contacting www.modelchoice.net or your local hobby shop or online retailer.

Review Author
Chris Graeter
Published on
August 16, 2012
Company
Trumpeter
Scale
1/35
MSRP
$45.99

History

The IT-1 tank was a Soviet cold war missile tank based on the T-62 Hull. The tank was specially designed to carry and fire the 3M7 Drakon missile from a pop-up launcher. It saw limited service from 1968 to 1970. It was withdrawn due to the limited ammo it could carry and the large dead zone around the tank caused by the minimum range of the missile. Most were converted into recovery vehicles.

The Kit

The contents of the kit are nicely boxed and individually wrapped in plastic sealed bags. There are 19 sprues, 1 clear sprue, 1 PE fret, and the lower hull section. The instruction are in booklet form with 12 pages of black and white instructions. A separate color painting guide is also included. No decals come with the kit and there are no instructions to guide you as to where they might have gone.

Review Author
Scott Hollingshead
Published on
August 16, 2012
Company
Revell, Inc.
Scale
1/25
MSRP
$19.99

If, as a builder, you are interested in nostalgia, or are fascinated by early organized drag racing, then Revell has come through for you with the re-release of this classic Tony Nancy set of dragsters. First released in 1963, and with the date still showing up in the moldings, this kit represents the dragster and roadster that won the Competition Eliminator (the ’23 “T” Roadster) and Best Engineered Car (the Dragster) awards at the Winternationals in 1963. Tony Nancy, whose nickname was "The Loner" based on his ability to practically field a car by himself, set at least one record or Drag News 1320 mark in every class in which he competed, which encompassed cars such as a V/Fuel Dragster in 1957 through Top Fuel, where he held the national speed record at 236.22 in 1971. He was well known both for his seahorse emblem and for his upholstery business which served many Hollywood stars (such as Steve McQueen and Clint Eastwood), and working on boats and a variety of automobiles.

Review Author
Floyd S. Werner Jr.
Published on
August 16, 2012
Company
Airfix
Scale
1/48
MSRP
$54.00

Airfix has returned to the forefront of modeling with the release of the Westland Lynx family. This release is the naval version of the Lynx. Airfix has also released an Army version. Typical of most naval aircraft, the helicopter can fold its blades and tailboom for storage onboard ship.

This release contains 331 pieces of light blue/grey plastic. My review copy had no flash that I could see. The parts are all packaged in a heavy gauge cardboard top-opening box. The box is packed with the parts and decals. The parts are sealed inside a plastic bag inside the box. Thankfully, the clear parts are packaged in a separate plastic bag. The decals are on a large sheet inside the instructions book, so be careful when opening it up.

Review Author
Brian R. Baker
Published on
August 16, 2012
Company
Italeri
MSRP
$3.50

Introduction

For the past 50 or so years, I have built plastic models and painted them using various types of enamel paints. For the earlier wooden models, before plastic kits became popular, I used regular model airplane dope (actually, lacquer), sometimes laced with talcum powder to achieve a matte finish. I started airbrushing relatively early, still using enamels, and eventually settled on the Testors’ Model Master series, which I have found to be entirely satisfactory. The only problem with using enamels indoors is that my wife constantly complains that the odor is overpowering, although I don’t think that it is really that bad, certainly not as bad as the smell of onions cooking in a frying pan, which has to compete favorably with the Geneva Convention’s definition of “gas warfare”. But that aside, I requested several colors of Italeri’s new acrylic paint series for evaluation.

Review Author
Floyd S. Werner Jr.
Published on
August 16, 2012
Company
Eduard
Scale
1/48
MSRP
$8.00

When you are building the Eduard 1/48th scale Bf-109s, you are struck by the quality of the plastic parts. But, like any kit, there are limitations that plastic can do. Resin is the answer in many instances. In this case, Eduard, the manufacturer of the kit, does the work for you. This does a couple of things – first, it ensures that the parts are going to fit the kit they were designed for. I like this concept. Secondly, these parts take less time to make a big difference over the kit parts. I’m all about being able to build faster.

Packaged in a sturdy plastic carton are two resin wheels, two spoke assemblies, and one tail wheel assembly. The resin is perfectly cast in light grey and dark grey resin with no blemishes or air bubbles. Also included but hidden in the packaging are masks for the wheels.

Review Author
Floyd S. Werner Jr.
Published on
August 16, 2012
Company
Twobobs Aviation Graphics
Scale
Multiple Scales
MSRP
$14.00

Designed to replicate the paint scheme on Sukhoi Su-30 demonstration aircraft, these F-15 markings are for the only aircraft of the 65th Aggressor Squadron to be painted in this manner. My copy of the decals has all three scales represented, 72nd, 48th and 32nd. The one thing about Twobobs products is the level of research that goes into a product. This sheet is no different.

The instruction sheet is printed on high, full color paper and contains some small photos of the real thing. The instructions provide a listing of the accessories that are available, and not just the ones available through Twobobs. The background of the full color instruction sheet will aid and inspire the modeler. The instructions provide four-view drawings that provide the modeler with an excellent reference for markings placement. This aircraft will be a masking “fun time”.

Review Author
Jim Pearsall
Published on
August 16, 2012
Company
Italeri
MSRP
$3.50

When Steve Collins asked for volunteers to try Italeri’s new acrylic paints, I jumped right in there. I was doing a Monogram battleship as the USS Wisconsin, and I needed something to use as Deck Tan and Battleship Gray.

  • 4763AP Flat Gull Gray FS36622
  • 4726AP Flat Dark Green FS 34079
  • 4673AP Flat Wood FS 30257
  • 4313AP Flat Medium Sea Gray FS36270
  • 4709AP Flat Dark Tan FS30219

The paints come in 20milliliter bottles with a snap-open cap which allows you to take a small amount of paint from the top, which is great for doing fine work. You can also unscrew the lid and get a big dollop for painting a large area. The snap cap makes it very difficult to spill the paint, a plus when working with several colors at once.