Review Author
Floyd S. Werner Jr.
Published on
January 21, 2012
Company
Quickboost
Scale
1/48
MSRP
$6.50

Hobby Boss seems to be producing almost every version of the Me-262. The upgunned U-5 version is a nice looking kit. However, cleaning up the gun barrels is a pain. Also pains to maintain are the roundness and drilling out the center hole. Quickboost addresses both of these issues.

This is a small set, cast perfectly in a light grey-green resin which contains the two cannons that are direct replacements for the kit parts. They are perfectly round and have the barrel thinned out. It is simple and easy.

Highly recommended.

Thanks to Quickboost and IPMS/USA for the review sample.

Review Author
Floyd S. Werner Jr.
Published on
January 21, 2012
Company
Quickboost
Scale
1/48
MSRP
$8.50

The Academy Mig-21 kit is a nice kit. However, the parts breakdown of certain pieces is a pain. This is apparent especially on the kit gun pods. The kit part has a seam right down the middle which will be difficult to fill. The kit pod also has minimal detail and some shape issues. The Quickboost resin cannon pod has exquisite detail. The vents and fasteners are perfectly represented, but the best feature is the drilled-out gun barrels. I’m sure I could not drill them as well as Quickboost because these things are so small that I’m sure I would have just made a mess of it.

The single piece is molded perfectly in light grey resin. Removal is quite easy and adding it to the belly is easy enough as long as you don’t cut off the mounting stubs. The Quickboost pod has a more accurate shape, especially around the front portion.

Highly recommended.

Thanks to Quickboost and IPMS/USA for the review sample.

Review Author
Floyd S. Werner Jr.
Published on
January 21, 2012
Company
Aires Hobby Models
Scale
1/48
MSRP
$10.50

Soviet underwing armament is quite unique looking when compared to the US equivalents. These rockets are no exception. Perfectly cast on four light grey resin blocks, with a block of clear resin “nose cones” and decal markings, these are some really nice additions to your Soviet aircraft.

The resin is flawless. Two of the pour blocks are the rocket launcher bodies. The other one is the rocket motors with some exquisite detail, especially the rocket flutes. The final grey piece of resin is the unique shaped-charge warhead and control fins. The fins will require care to prevent them from flying off, as they are very petite but realistically thin. The clear pour block has the rocket tip for these particular rockets.

Review Author
Floyd S. Werner Jr.
Published on
January 21, 2012
Company
Aires Hobby Models
Scale
1/48
MSRP
$10.50

AeroBonus is a specialized company from Aires that concentrates on Soviet wing stores. The latest release is a couple of air to ground rockets. Molded on four pour blocks with some exquisite detail, these unique looking rockets are quite impressive. There are two mold blocks with the rocket bodies. The other two are warheads on one and tail units on the other block. I really liked the rocket flutes on the tail which are petite and perfectly cast. Quickboost uses light grey resin that has no imperfections. Removal is easy and assembly will represent no problems, even to beginning resin users.

Review Author
Floyd S. Werner Jr.
Published on
January 21, 2012
Company
Quickboost
Scale
1/48
MSRP
$6.50

The HobbyBoss kit of the Ta-152C-0 is the first all-injected version of this prototype aircraft. If you are like me, you can never consistently open the ends of the exhaust stubs to make them look realistic. I’m thankful for Quickboost, as they have some of the best examples that are easy replacements for the kit items and have the look I’m after.

This set contains two exhaust stubs molded in light grey, blemish-free resin. Removal from the pour blocks is simple enough. Just add paint and add to the kit. Really simple and effective.

Highly recommended.

Thanks to Quickboost and IPMS/USA for the review sample.

Review Author
Howie Belkin
Published on
January 22, 2012
Company
Master Box Ltd
Scale
1/35
MSRP
$15.95

This odd combination of five Allied soldiers meeting up and serving together seems like something dreamed up in Hollywood. Well, it WAS first dreamed up in the 1943 movie Sahara, starring Humphrey Bogart as the American M3 Lee tank commander. A 1995 cable TV remake starred James Belushi in that role. Ukraine’s Master Box Ltd.’s illustrator A. Karaschuk and sculptor A. Gagarin must have seen the Belushi version and “subconsciously” paid homage to the movie. The American figure happens to strongly represent Belushi, and the others certainly suggest others in the movie’s cast. Unfortunately, we didn’t listen to Shakespeare, and our society is drowning in a flood of litigious lawyers and the movie industry has missed out on an opportunity for free publicity as Master Box plays it safe and any similarity between these figures and that movie is purely coincidence...

Book Author(s)
Maciej Goralczyk, Mariusz Lukasik, Andrzej Sadio, and Janusz Swiation
Review Author
Hub Plott
Published on
January 22, 2012
Company
Kagero Publishing
MSRP
$21.69

This is essentially a book of lovely color aircraft profiles! There are 16 aircraft covered by this book: three D. 520s, two Hawk 75s, 4 MS 406s, one Bf-110C, and six Bf-109Es that were engaged in the Battle of France in 1940. The profiles are beautifully drawn and each is accompanied by a short caption in both English and Polish detailing a short history of the pilot and aircraft depicted.

Accompanying the book are decal sheets in 1/32, 1/48 and 1/72 for all of the aircraft illustrated within. The profiles serve as the placement guide for the decals. The decals themselves are absolutely gorgeous! They are well printed, in register, with vibrant colors. The sheet illustrated with this review is the 1/32 sheet, but all markings are on the sheet for each scale. The decals are printed by Cartograf, so you know they are good. I will need to dig the old Medallion 1/48 resin Hawk 75 out of the stash and buy an AZ MS 406 to put these to good use.

Review Author
Howie Belkin
Published on
January 23, 2012
Company
MiniArt
Scale
1/35
MSRP
$16.25

To the best of my knowledge, this is the first set of injection molded French Tank Crewmen ever released!! This kit contains 45 grey styrene parts that will create five crewmen. Four appear to be from the Battle of France, while the fifth looks somewhat like a young General Leclerc, aka General Jacques Philippe Leclerc de Hauteclocque. In truth, he is representative of a standard French Armor Lieutenant. Ukraine’s MiniArt Ltd’s artist, A. Karaschuk, illustrates each figure on top of the side-opening box. They are repeated on the box bottom, where they are keyed for parts placement and colors. Paint numbers are color coded for Vallejo, Testor, Tamiya, Humbrol, Revell and Mr. Color paints. A small black-and-white insert shows the two sprue trees and part numbers. Each figure is nicely molded, with distinct faces and accurate uniforms. They have minimal flash and seam lines that are quickly cleaned up.

Review Author
Dave Steingass
Published on
January 23, 2012
Company
Zvezda
Scale
1/72
MSRP
$4.95

Included in the box are two identical sprues, molded in hard grey plastic. Each sprue contains 9 parts to build a complete 81mm Mortar and a crew of two with a base, as well as 3 additional parts for use with the Art of Tactic ruleset. Also included are two game data cards for use with the Art of Tactic ruleset and an instruction sheet. Only minor flash was present and was easily cleaned off with a sharp knife.

Assembly is easy and straightforward. The kit is a snap-together kit, and the model builds quite well in this manner with no major gaps are seen. However, I glued my sample together for stability while painting. The plastic base supplied with the kit is superbly detailed with ground texture compared to other figure manufacturers in this scale and price range, and all the alignment pegs in the figure fit perfectly into the alignment holes in the base.

Review Author
Bill Hollis
Published on
January 23, 2012
Company
Aires Hobby Models
Scale
1/48
MSRP
$21.50

Made specifically for the Tamiya 1/48 scale P-47 Bubbletop, this comprehensive aftermarket set comes in Aires’ usual blister package. Separately ensconced in a secondary bubble are photo etch and film parts, along with the usual blue instructions.

In fact, the instructions alone come in for any criticism that may be reasonably leveled at this set. They are composed entirely of minimalist exploded drawings spread over two sides of a single folded sheet of paper, with only number callouts and small notations in both English and Czech. There is no history or background text, and the modeler is left to his own devices concerning colors and, in many cases, actual part placement. However, none of this is really a detriment, and any halfway competent modeler with a reference book or two in his library will overcome nicely.