Thanks to David Lajer of Aires, and to IPMS/USA for giving me the opportunity to review this sweet little detail! I recommend it highly.

These pitot tubes are cast in pale tannish gray resin, with three tubes protected by casting sprue on three sides. This arrangement will provide the modeler with enough nose tubes for three planes, or in my case, enough for one plane and two mistakes. The shipping package is reseal-able, so you can keep the extra tubes secured.

There is little to say about these elegant little tubes, after all they are pretty small. But I micrometered them and they are well with scale tolerances. There is a little bit of variability in the length of the real thing anyway, so this is a minor consideration. More importantly, having this small detail greatly enhances a very prominent place on the model.

Kit Review

The P-47 “Thunderbolt” went through a major design upgrade in 1943, when its canopy and back fuselage was modified to be a “bubbletop”. Based on the information in the book the ‘inspiration’ for this modification was the RAF Hawker Typhoon.

This book covers all the “bubbletop” production variants from P-47D-25 to the final version, the P-47N, including all the related prototypes.

The first section of the book is dedicated to technical details on each prototype and production variants. There are plenty of historical pictures for each variant including foreign operators and post war operators and even a few historical color pictures too.

The second part of the book is a “walk around” of different P-47 preserved in museums. The walk around is neatly organized by “fuselage”, “tails”, “landing gear”, “engine”, etc.

This decal sheet represents another of the Yellow-Wings “complete aircraft packages”, this time concentrating on pre-WWII and early war Wildcats. Covered are F4F-3s from two Atlantic Fleet carriers from early 1941, USS Ranger’s VF 41 and USS Wasp’s VF 72, and an early war F4F-4 from USS Enterprise VF-6 based on Guadalcanal and flown by ace Donald Runyon, complete with “tombstone” kill tally tail markings. The set contains all the details that we’ve come to expect from Yellow Wings, including squadron badges, propeller tip markings, walkways and fine pin stripes to outline the painted cowl colors. There are minimal stencils, as was the case on Wildcats of the era. As always, the printing (by Microscale) is sharp and in perfect register, and there is a bare minimum of carrier film. Yellow-Wings recommends the Hobby Boss F4F-3 or the Tamiya F4F-4 (suitably backdated for the Atlantic based aircraft).

Description

This is a 7 ½ by 9 ½ inches hard-cover book with 240 pages. All photos are in color and the paper quality is exceptional. Every time I turned the page, I thought that I was turning 2 pages due to the thickness of the individual pages.

Book Theme

The title of the book is “US MULTI-ROLE FIGHTER JETS” and prior to reading this book I only had a vague idea as to what “Multi-Role” meant. In this book Davies describes these jets as having the flexibility to change their mission capabilities (air-to-air, air-to-ground, jamming, protection, missile and AAA suppression, refueling, etc.). Some of the changes are done prior to missions and others are called upon depending on mission discoveries or opportunities.

Thanks once again to Quickboost for providing IPMS/USA me these review items; these little things make a big difference, and we appreciate it!

OK, this is about as simple a review as you can get. These four vents are replacements for the kit items; the new QB vents are already hollowed out, and make a big difference in the appearance of the final product. These vents face backwards, and dump heat overboard. See the scan of the instruction sheet for Items 7F, 8F, 39A and 40A on the upper back of the aircraft.

Most of us old school guys use #11 Exacto blades and twirl away, occasionally stabbing ourselves in the fingers, to get hollow intake/exhaust vents.

Enter Quickboost! As we have come to expect, a fast one-for-one replacement for the kit items (See the photos!). The gray ones are the Quickboost; the white blob is one of the kit items.

These items are true “Even a monkey could… “ replacements. Worth the cash and acquisition time.