This review covers packs 7, 8, and 9 of the Agora Models Jaguar build. Please see parts 1 and 2 of this review for the first 6 packs and more information about the kit.

Pack 7 starts off easy by assembling the two halves of the mufflers (or “silencers” per the instructions) and installing them onto the floor assembly from pack 6. The rest of pack 7 is devoted to building the left front and right rear wheels and then inserting the left front wheel into the tire and installing it onto the front subframe.

I am finally getting the hang of putting these wire wheels together. My biggest frustration with installing the first two sets of spokes on each wheel has been getting each spoke pointed in the correct direction to seat properly on the rim. I have found that it is easiest to turn the spoke while it is only about halfway inserted. Once it is turned, it is pretty easy to pull it the rest of the way through and get it into place without disturbing the other spokes.

Adam Jońca is an illustrator and author. He has contributed to several Stratus / MMP series, including Polish Tracks & Wheels [3 Volumes]; Polish Armoured Trains [3 Volumes; and Single Vehicle [4 Volumes].

I like the P-39 series aircraft as they are unique and not flown in combat as they were designed. Like a lot of early war aircraft, they were used because newer models weren’t available. As such, the P-39s flew in combat in the Pacific, and the Russians particularly liked them for ground attack. Like the aircraft, my experience with this model looks good from afar, but far from good.

Reference the Arma Hobby website for this P-39Q.

Bell P-39Q Airacobra Fighter Aircraft Model in 1/48 Scale

New Arma Hobby 2024 molds

The model includes a code to download a 3D printer file with detailed cockpit accessories:

This is a reissue of the Monogram original from the 1980s. Done in an odd 1/32 scale, this kit is a trip back in time for me because I didn’t build car models back then. The kit is very basic by today’s standards but there are a few areas where the detail is quite good. I found the interior had very good texture on the seats and especially the dash. Trans Ams had a brush rotary finish in metal and the texture molded on the kit part looks convincing once painted.

I did use some plastic card stock to fill the front seat backs since they come hollowed out. Chassis detail is acceptable for the scale, but the engine is too small for the engine bay. The “Shaker Hood” sits too low if installed per the directions, so I glued it to the bottom of the hood. The only other part I wrestled with was the glass.

Valiant Wings has just released the 24^th volume in it’s Airframe and Miniature series, dedicated to the Junkers Ju88C through T models. This follows on the heels of volume 23 which covered the Ju88A through B series.

The book consists of 256 pages, including over 200 photos (of operational as well as museum aircraft), scale line drawings, color profiles, several model builds, a set of 1/48 plans and more. The contents are printed on high-quality, semi-gloss pages, with heavier stock covers. This book follows a similar format to others in the series.

The first 25 or so pages, titled “preface” (one of the more in-depth prefaces I have seen!) pick up where the previous volume ended, and dive into an historical overview starting with the Ju88C. This overview continues through later models and into post-war usage as well as captured airframes.