Extreme appreciation to Eduard for their having once again provided a sample copy of a long-awaited product, the F-8E Crusader, and the usual wave of thanks to the IPMS USA leadership for ensuring I received it!

This upgrade provides additional detail for the recently re-released Hasegawa F-8E crusader under the banner of Eduard, in the form of a hollowed out intake with visible depth to the intake. Just four parts here; two very thin PE baseplates with rivet detail, and the scoops themselves.

Installation steps: drill the two mounting holes in the afterburner position on the model at the pre-located drill hole wells from the inside, then carefully remove the PE baseplates from their fret. Dress the cut marks with your favorite method, then set aside.

Coastalkits from the UK has produced a line of model display bases in various national insignia designs. This particular design is a replica of a USAAF insignia (white star on blue background) circular cutout. The diameter is 200 mm (about 7&3/4 inches) and is suitable for small to medium sized 1/72 scale aircraft. Other insignia designs include Royal AF, Royal Australian AF, Hellenic AF, French AF, Soviet AF, and Canadian AF, along with some scaled airfield designs.

The resolution of the printing is excellent, and provides an eye-catching background setting as an added presentation touch for your latest masterpiece at contests, or in your display case at home. The artboard core of the base makes for a lightweight addition to your contest take-along accessories that will make your model stand out from those that are simply placed on top of the standard entry paperwork.

This resin kits is of the standard US Tow Tractor used on airfields from the beginning of WWII to the 1950’s. This is such a nice addition to any airfield diorama. The kit represents the factory basic version as delivered these were customized a lot so you can modify it to suit any reference material you have. The kit is very easy to build as long as you watch the instruction details carefully.

In the box is:

• 35 resin parts
• 1 plastic rod
• 1 instruction booklet

All the parts are all very well details with no defects. Once the parts are removed from the base parts they are extremely well molded with no flash or bubbles.

Construction

The build is very easy and is made up of 12 steps. I had no issues with the build, very little filling was required. It when together beautifully. There is also an optional rear armor plate that can be installed.

Scale Aircraft Conversions specializes in white metal replacement parts. Its line of replacement landing gear has been expanded to include a set for the 1/48 Hobbyboss IAR-80.

The set includes 5 parts with the following breakdown: two main landing gear struts plus actuator arms for the above and a tail skid. The parts are finely molded in white metal. These parts are drop-in replacements for the plastic parts.

I should say that these parts are more than just drop-in replacements. Many of the white metal parts actually comprise the equivalent of a few plastic parts, so you get an easier job of assembling the landing gear as you have fewer parts to deal with.

Note that in this particular set, you will have to bend “open” the wheel fork for the main landing gear in order to install the wheel and then bend it back to the “closed” position. This is not an issue because you are using white metal.

Recommended to modelers of all skill levels.

Extreme appreciation to Eduard for their having once again provided a sample copy of a long-awaited product, the F-8E Crusader, and the usual wave of thanks to the IPMS USA leadership for ensuring I received it!

This upgrade provides additional detail for the recently re-released Hasegawa F-8E crusader under the banner of Eduard, in the form of a detailed Exhaust nozzle for the afterburner section.

I begin by spray priming all the parts with Tamiya spray gray primer to allow the color paints and weathering to commence.