This set is another of Eduard’s new “Steel” seatbelt line. The set is advertised as being for World War II Luftwaffe fighters, but the fret is etched “Bf 109” and “Fw 190”, so it appears the set is intended for just these two aircraft. However, in looking at photographs of belts in other Luftwaffe fighters, I think they could be used for other aircraft as well.

The set includes four sets of lap-belts and shoulder harnesses, two for the Bf 109 and two for the FW 190. In looking at the belts closely, about the only difference I can see is the upper attachment point for the shoulder harnesses. As I did not have either a Bf 109 or a Fw 190 underway, I installed the Bf 109 set in a Hasegawa Me 262 and the Fw 190 in a Ta 152H that have been in the bench queens pile for a while.

PJ Production is a Belgian firm that specializes in the creation and production of resin scale models and accessories aimed at modelers of military aircraft kits and aviation-related dioramas in 1/72nd, 1/48th and 1/32nd scale. Their lines include fine and accurately detailed cast resin replacement and supplemental parts for model kits in the most commonly produced scales.

PJ Productions has produced a resin JL 100R rocket launcher for use with aircraft armed with such types. An out-of-box evaluation (see photos) indicates two reproductions of the French-manufactured weapons that provide a realistic scale-detailed assembly fro mounting to your kit’s pylons. The panel detailing is extremely fine, with fore and end caps cast separately.

The amazing Tamiya Tomcat has yet another aftermarket item to dress it up: Early wheels fro Eduard.

The Eduard Brassin set for the F-14A Tomcat includes 8 resin parts and a sheet of paint masks.

The instructions are simple enough, as this is a fairly easy set to build (and illustrate). The 4 tires are molded onto pour plugs which make painting the wheels easy. The first step is to paint the nose gear and main hubs white. After a bit, one can mask off the nose gear hubs with the masks provided. The mask sheet gives you 8 masks for the wheels, but only the 4 for the nose gear are to be used. If you save them, you can reuse them on the kit gear and have masks for the main gear.

Once the masks are in place, then use your favorite tire color to paint the tires blacks.

PJ Production is a Belgian firm that specializes in the creation and production of resin scale models and accessories aimed at modelers of military aircraft kits and aviation-related dioramas in 1/72nd, 1/48th and 1/32nd scale. Their lines include fine and accurately detailed cast resin replacement and supplemental parts for model kits in the most commonly produced scales.

PJ Productions has produced a resin set of two (2) LAU-32 rocket launchers for use with aircraft armed with such types. An out-of-box evaluation (see photos) indicates two reproductions of the French-manufactured weapons and options for either CES 3 or ADP 2 pylons that provide a realistic scale-detailed assembly for mounting to your kit. The panel detailing is extremely fine, with fore and end caps cast separately.

Andy Evans is currently the Group Editor for the SAM magazines Scale Military Modeller International and Model Aircraft Monthly. Andy has authored at least 12 books, including Crowood’s Bae/McDonnell Douglas Harrier (1998), Crowood’s Panavia Tornado (1999), Cassell’s Combat Search & Rescue (1999)Warpaint Books’ Sepecat Jaguar (2006), SAM’s The British Aerospace Sea Harrier (2007), SAM’s The McDonnell Douglas F-4 Phantom II Part 1 (2007), Dalrymple & Verdun’s The Nimrod (2007), SAM’s The McDonnell Douglas F-4 Phantom II Part 2 (2008), SAM’s The McDonnell Douglas F-4 Phantom II Part 3 (2008), SAM’s The Grumman F-14 Tomcat (2008), SAM’s The Bae (Hawker Siddeley) RAF Harrier (2010).