Plusmodel has made a rounded top European wood gate. This set is made from laser cut wood and contains two sheets of cut wood parts, about 43 in total. The set also comes with directions to construct the gates.
Plusmodel continues its laser etched wood releases with a straight sided gate. This set is made from laser cut wood and contains two sheets of cut wood parts with 26 parts. The set also comes with directions to construct the gates.
Construction starts by removing the parts from the backing. There are small attachment points which are sanded flat. I used clear Elmer's glue for all the building. One note here. If you are going to stain the parts or paint them later, watch where the glue goes as it will fill the wood and leave some issues with the paint or stain working. To start, the door panels are two parts- back and front. This allows for depth which is great. I added glue and aligned the pieces and added weight to keep flat while drying. Once done, the framework on both sides is added and I glued and clamped these also. Plusmodel provides a nice diagonal frame on one side which is great. Once dry, the parts were given a light sanding with a fine grit paper/stick.
