Review Author
Dave Koukol
Camden Koukol
Published on
May 22, 2012
Company
Revell, Inc.
Scale
1/72
MSRP
$15.95

Now the United States Air Force’s “Air Dominance Fighter,” the F-22 Raptor is arguably the world’s most advanced and capable air-to-air fighter aircraft. As part of the competition between the F-22 and F-23, the “YF” prototypes were flown, studied, and evaluated. Revell’s latest Snap-Tite aircraft offering, the YF-22, is a faithful reproduction of the winning prototype design.

Molded in light gray plastic with a sprue of tinted clear containing the canopy and another molded in black with the base, the kit convincingly captures the lines and essence of the YF-22. Camden, age 6, assembled the 15 kit parts in no time flat with minimal guidance from Dad. Since no painting instructions were provided, we opted to leave it “natural plastic.” The peel-and-stick “decals” flew on over the ensuing 20 minutes, and in less than an hour, Camden had completed his replica of the world’s most advanced fighter and had it buzzing around the house hunting for MiGs.

Review Author
Dick Montgomery
Published on
May 22, 2012
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$17.95

The Parts:

SAC provides 10 individual parts, replacing the gear and struts included in the J-8B kit from Trumpeter. The detail on the original kit parts is faithfully reproduced on the SAC parts.

Assembly:

Most of the SAC gear that I’ve used are free of “step” flash, that small line marking the point at which the molds join up. One of the main gear struts in this set required a swipe or two with an Xacto blade to eliminate the step and the parts were ready for priming.

Attaching the SAC parts to the kit is straightforward and easy. The fit is always nice and tight, alignment is good, and I’ve never experienced any problem with a SAC part fitting into the kit as well or better that the original part.

Painting:

It is advisable to prime the parts with a primer of your choice. I use gray automotive primer from Wal-Mart or Target.

Conclusion:

Review Author
Dick Montgomery
Published on
May 22, 2012
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$14.95

The Parts:

This product contains four pieces cast in white metal which replace the struts and gear for the Bronco kit. The molding is clean, with no “step” along mold release points. The details match kit parts, rivet for rivet, but with no flash (kit parts have a little flash).

The SAC main landing gear struts are molded as “one” piece whereas the kit main gear struts require two pieces to be glued together to form one strut.

Assembly:

We’ve all seen the notice, “no assembly required”, but other than attaching the SAC parts to the Bronco kit, there isn’t any assembly required to prepare the SAC parts. The SAC parts fit nicely. They are snug and tight and fit into the Bronco kit just as the original parts fit.

Painting:

I prime metal parts with an inexpensive primer found at Wal-Mart and Target. Use a primer of your choice.

Conclusion:

Review Author
Scott Hollingshead
Published on
May 24, 2012
Company
Aires Hobby Models
Scale
1/48
MSRP
$16.50

Being that this detail set is denoting the gun bay of an F-5E Tiger II, I will begin with a little history of the M39A2 cannon, which is represented in this set. This weapon was developed by the Springfield Armory in the late 1940’s, and was based upon the German Mauser MG 213. The design was a five-shot revolver firing 20mm by 102mm projectiles at a rate of 1500 rounds per minute at a velocity of 3300 feet per second. The M39A2 was first released in 1964, but the M39 guns themselves entered service in 1952, and were mounted within the F-86H, F-100, F-101A and C, as well as the F-5 variants. Ford and Pontiac are among the companies who manufactured the M39 cannons, and some 35,500 have been produced. The M39A2 itself weighs 178.5 pounds and is just over six feet in length.

Book Author(s)
Hans-Heiri Stapfer
Review Author
Andrew Birkbeck
Published on
May 24, 2012
Company
Squadron Products
MSRP
$18.95

Yet another in the long established series of military vehicle monographs from Squadron Signal Publications under their “Walk Around” range, this particular title covers the Jagdpanzer 38 Hetzer. The book is in softback (card cover) format, 80 pages in length, with the glossy paper pages measuring 11 x 8 inches. The same title is also available in a hardback format, should you wish to spend the additional money.

Those familiar with this series of books will not be disappointed, as it follows the tried and true Walk Around format: the reader is given a brief written history of the Hetzer range of vehicles, a late war armored, tracked tank destroyer based on the Panzer 38(t) chassis. The Hetzer became the most widely used tank destroyer employed by German forces in WW2.

Review Author
Scott Hollingshead
Published on
May 24, 2012
Company
Scale Aircraft Conversions
Scale
1/32
MSRP
$19.00

First flown in December of 1944, the Heinkel He 162 Volksjager (people’s fighter) was known as the “ninety day wonder” as it went from an Air Ministry requirement to prototype in a mere three months. Like the other jet fighters of the day, it relied upon the BMW 003 turbojet engine, which was highly demanded as the Second World War drew to a close. The plane was 29 feet 8 inches in length, had a wingspan of 23 feet 7 inches, and stood 8 feet 6 inches tall. The A-2 variant carried a pair of 20mm MG 151 cannons with 120 rounds per gun. Depending on the source, between 238 and 320 of these aircraft were built. Something that I found unique is that the Volksjager, which is often referred to as the Salamander, was built under the code name “Sparrow”, which is what the Heinkel company called the plane during construction.

Review Author
Scott Hollingshead
Published on
May 24, 2012
Company
Master Model
Scale
1/350
MSRP
$14.50

As a little something different, I am going to begin this review with a story relating to my introduction to the USS Independence LCS-2. Over Thanksgiving week in 2010, my family and I were traveling to Virginia Beach to spend the holiday with my in-laws (no jokes here, they really are great people). When we first arrived in the Hampton Roads area, we stopped at my favorite hobby shop in the country, at least of all the ones that I have been in. There on the end of an aisle was a brand new release from Trumpeter of the USS Independence (kit 04548), a new littoral combat ship with a trimaran hull. Although I am a former carrier sailor, I had to have this kit in my stash, as it was incredibly state of the art in its appearance. While talking to the owner of the store when I was checking out, he mentioned that the ship was moored in Norfolk that week, and this set my mind to work.

Review Author
Phil Pignataro
Published on
May 24, 2012
Company
Eduard
Scale
1/72
MSRP
$16.95

This elegant looking jet trainer has been in service with numerous air forces for many years and has even become a common sight at “warbird” fly-ins. Several years ago, Eduard released an exquisite little model of this trainer. Their latest version is the “Weekend Edition,” a more basic boxing of their “Original,” “Dual Combo,” or “Profipak” releases. To meet the “weekend” criteria, this kit has no photo-etched frets, resin pieces, masks, or decals for multiple marking options. What you get instead is the all-plastic, basic kit with decals for one scheme: the Libyan Air Force Academy circa 1985. Included in the box are 56 pieces molded in tan plastic, six pieces of clear parts, a decal sheet with lots of stencil/data markings, and a six page instruction booklet. All the pieces are crisply molded with excellent surface detail. The decals are on register with the instrument panel renditions among the best I’ve seen in this scale.

Review Author
Floyd S. Werner Jr.
Published on
May 26, 2012
Company
Bombshell Decals
Scale
1/48
MSRP
$16.00

Bombshell Decals came on the decal scene with …well, a bang. Their latest release is based on the Monogram A-26B Invader. The glass nose version was used in Korea and was quite colorful with its overall gloss black paint scheme. The subjects of this sheet are two aircraft which sported Esquire girl nose art.

The decals are printed by Cartograf, so you know they are in perfect register and will respond well with setting solutions. In my opinion, Cartograf decals are the best in the world. The decals are on a single sheet of 5.5” x 8”. You can see the quality in the decals by looking over the Esquire girls. They are perfectly rendered and are some of the best looking pin-ups available in decal form. They have perfect shading and blending to make them exactly like the real thing. Beautiful work by Bombshell and Cartograf. This is the new standard for nose art.

Book Author(s)
Michael Collins and Martin King
Review Author
Pablo Bauleo
Published on
May 26, 2012
Company
Zenith Press
MSRP
$29.00

Authors Michael Collins and Martin King have written a well researched and historical account of the German attack in the Ardennes in December, 1944. What makes this book special is that it covers the human (but not necessarily humane) aspects of the battle.

The book is a day-by-day narration of the main military actions that occurred during the Battle of the Bulge. Each chapter begins by describing the front situation and what different units were charged to do. So far, that is a ‘regular’ history book. But then the rest of each chapter has first person narratives from the soldiers (from both sides, but mainly American ones) and even support personnel like nurses, on how they managed to do what they were charged with.

Most of the book covers the German thrust up to December 25th. The last chapter of the book covers the Allied counter-attack that lasted from late December, 1944, up to January/February, 1945.