Reviews of products for scale miscellaneous models.

Book Author(s)
Steven J. Zaloga, Illustrated by Ian Palmer
Review Author
Bill Kluge
Published on
July 5, 2011
Company
Osprey Publishing
MSRP
$17.95

Any student of the Pacific War will be familiar with Japan’s use of thousands of conventional aircraft – fighters, bombers, trainers and nearly every other type flown by her Army and Naval Air Forces – into “Special Attack” weapons: the Kamikazes. What is less understood is Japan’s development and use of purposely designed suicide weapons. Author Steven Zaloga is well known for his extensive writing on the subject of military fighting vehicles. In this Osprey New Vanguard edition, he as done a superb job of highlighting all the various types of air, sea and land weapons used by the Japanese Army and Navy “Tokko” (special attack) units.

Review Author
Roger Carrano
Published on
June 6, 2011
Company
Eduard
Scale
1/35
MSRP
$26.95

Eduard has recently come out with a bunch of new products which will enhance the realism of some dioramas through photoetch. Eduard has come up with a small wired sheet with what looks like tiny pieces of confetti colored with three shades of green for their spring sheet. It is approximately 5 ½ by 9 inches which is attached to a border around the perimeter. This must be cut off and then the sheet can be folded, rolled, crushed, torn, twisted, poked, bent, and cut to any size with a scissor or modeling knife. It does conform to the shape of the object but still not as well as a piece of cloth. Reshaping and bending too much can cause the color to peel but I would guess that touching it up wouldn’t be a great task. The colors do need to be toned down a bit as they are kind of shiny but again no great task.

Review Author
Roger Carrano
Published on
June 6, 2011
Company
Eduard
Scale
1/35
MSRP
$26.95

Eduard has recently come out with a new product which will enhance the realism of some dioramas through photoetch. Eduard has come up with a small wired sheet with what looks like tiny pieces of confetti colored brown, red-brown, and tan for their autumn sheet. It is approximately 5 ½ by 9 inches which is attached to a border around the perimeter. This must be cut off and then the sheet can be folded, rolled, crushed, torn, twisted, poked, bent, and cut to any size with a scissor or modeling knife. It does conform to the shape of the object but still not as well as a piece of cloth. Reshaping and bending too much can cause the color to peel but I would guess that touching it up wouldn’t be a great task. The colors do need to be toned down a bit as they are kind of shiny but again no great task.

Review Author
Dick Montgomery
Published on
May 30, 2011
Company
Model Art
MSRP
$14.00

Model Art Modeling Magazine is one of the finest periodicals on the market. Each issue covers subjects across the modeling spectrum. Regardless of your area of interest you will, sooner rather than later, find something of significance to you. The quality of the images within each issue is stunning, and that is important since the magazine is published in Japanese. There are always “work in progress” images and the tools and materials being used by the builder are always featured prominently in the images. It is not difficult, therefore, for the reader to use these “work in progress” articles as guides. While some details are certainly lost in translation, or the lack thereof, the general process followed in the “work in progress” is easy enough to follow.

Review Author
Dick Montgomery
Published on
May 30, 2011
Company
Model Art
MSRP
$14.00

Model Art Modeling Magazine is one of the finest periodicals on the market. Each issue covers subjects across the modeling spectrum. Regardless of your area of interest you will, sooner rather than later, find something of significance to you. The quality of the images within each issue is stunning, and that is important since the magazine is published in Japanese. There are always “work in progress” images and the tools and materials being used by the builder are always featured prominently in the images. It is not difficult, therefore, for the reader to use these “work in progress” articles as guides. While some details are certainly lost in translation, or the lack thereof, the general process followed in the “work in progress” is easy enough to follow.

Review Author
Mark Aldrich
Published on
May 23, 2011
Company
Pro Art Models
Scale
1/35
MSRP
$30.57

Pro Art Models has been around since 2002. I first found out about them when I was looking for aftermarket items to hop-up the Italeri HEMTT (Heavy Expanded Mobility Tactical Truck). They were one of the only names in the game. They had details for the interior, exterior, the fuel pump system and tires. They now carry a highly detailed rear mounted crane. They also carry a few radio sets that are absolutely gorgeous. There are currently three US distributors of Pro Art Models: Master Modelers Marketplace in Beaverton, OR, R&J Enterprises in Quilcene, WA and Military Hobbies in Orange, CA. You can also order direct from their site. They take MasterCard, Visa and my favorite PAYPAL.

Book Author(s)
Chris McNab with forward by Andrew Roberts
Review Author
Ken McDevitt
Published on
May 23, 2011
Company
Osprey Publishing
MSRP
$29.95

Forward

There is a trend developing with me relevant to Osprey Books. As with the last Osprey book, once I started reading it I could not put it down. The book arrived on a Friday and I started it Saturday afternoon. On Sunday afternoon I was finished.

Description

This is a 7 3/4 by 10 inch hard-cover book with 384 pages. Befitting the number of pages, the paper quality is good. This book contains many illustrations, diagrams and the photos come from public, private, commercial and museum sources. The font is not large but is very readable. Each weapon described is accompanied by several illustrations, photos and in some cases personal anecdotes about the weapon. Information “boxes” further describe the weapon’s characteristics and specifications. With all the photos, illustrations and drawings the book was a faster read than anticipated.

Review Author
Roger Carrano
Published on
November 13, 2020
Company
Eduard
Scale
1/35
MSRP
$29.95

As with all Eduard products, you can expect the detail to be excellent, and these nettings are no exception. The netting is so fine and true to scale and the colors used for the camouflage is perfect. The “Woodland” net is a mixed dark and light color which matches the foliage perfectly. The “Desert” net is of course lighter, but it has both a dark and light sand color which imitates the desert’s coloring perfectly. The size is big enough (5 ¼ x 9 ¼ in) to cover small munitions models and medium size tanks, but for large models, it might fall a little short. The “netting” is a little stiff (after all it is metal) so don’t expect it to just fall on the model and contour itself on its own. Rolling it shouldn’t be a problem but folding it might need something round at the fold to prevent it from creasing and after the fold is complete then the round object could be removed. It would have to be given some thought and planning ahead of time as to where and how it should be placed.

Review Author
Roger Carrano
Published on
April 21, 2011
Company
Eduard
Scale
1/35
MSRP
$26.95

When this package arrived I pulled it out of its mailing pouch, and if I didn’t recognize the Eduard Logo and packaging, I would have thought that someone had sent me real tiny leaves. That’s how realistic these fern leaves looked. They are already colored green and the color is perfect. It is colored on both sides, which makes assembly easy due to not having to worry about the wrong side showing because of it not being painted. They are very thin which also make them very fragile but can be easily bent to conform to any angle or shape you may need. Even though Eduard has decided that these ferns are 1/35 scale, they can be used for just about any scale within reason. The only drawback is that there is no picture of any kind, which shows how they should be “planted” or anchored to a “branch”. I guess we’ll have to figure it out on our own; which really isn’t that difficult.

Review Author
Roger Rasor
Published on
July 4, 2020
Company
Hasegawa
MSRP
$12.00

Most model builders think of useful small hobby tools when they hear someone say TRITOOL. However, this TRITOOL item is a fundamental building material for use in scratch building, customizing or finishing models. It is a unique self-adhesive sheet of thin pre-finished foil (film) that is intended to replicate red finishes on aircraft or other models (other primary colors are available, such as white, black, yellow, orange, blue, etc.). The package contains one 90mm x 200mm sheet of material that has a red semi-gloss finish. It appears to be the correct color for reproducing a Japanese Hinomaru.