1. Home
  2. By Year and Month
  3. By Year and Month

all 2014

Package

Spitfire Mk.IXc Late Version - Hispano Cannons in Fairings

Review Author
Ken McDevitt
Published on
Company
Master Model
MSRP
$6.95

This is the third replacement piece that I have acquired for my 1/48 Eduard Spitfire Mk.Ixc build. Master Model has produced a detailed pair of Hispano 20mm cannons that provide details that are missing even in the excellent Eduard kit. This is not to diminish the Eduard kit that has been reviewed by Bret Green as the definitive (his opinion) 1/48 Spitfire kit. In the photo the Master Model pieces are compared side by side to the sprue attached parts of the Eduard kit. You can clearly see the enhanced definition of the Master Model replacements. On close inspection there may be the opportunity for a steady hand, lots of patience and small sharp needle to do a little hollowing out of the front of the cannon barrel.

Recommendation

I highly recommend these replacement parts.

Thanks to Master Model for providing these parts and to IPMS/USA for the opportunity to review this item.

Boxtop

1956 Chrysler 300B
Review Author
Steve Jahnke
Published on
Company
Moebius Models
Scale
1/24
MSRP
$29.99

Overview and History

1956 was the second year of the wildly successful Chysler 300 series and aptly named after the second letter of what became known as the Chrysler “letter” series cars. The V-8 powered series eventually went as far as the 300L of 1965, however the letter series continued one more time as the V6 powered FWD 300M model in 1999. The standard engine was a 394CID (5.8L) “Hemi” V8. The available dual 4 barrel carburated “hemi” topped out as the first American V8 to produce one horsepower per cubic inch or 394HP, a fantastic accomplishment of the day. The car was available in three colors: Regimental Red (37), Cloud White (41) and Black.

Package

P-38 Correct Engine Covers
Review Author
Chris Gibson
Published on
Company
Quickboost
Scale
1/72
MSRP
$8.50

Quickboost has come out with a very nice aftermarket set of correct engine cowls for the 1/72 Academy P-38 Lightning. Right out of the clear packaging I could see that they did a very nice job in detail and size.

I took the kit cowls out and noticed I had to glue on the lower radiator intakes. The intakes did not fit very well, and would have to be filled and sanded. I then compared both cowls and you can see in the photos the kit lower intakes are bigger and thicker than the Quickboost. The scoops on the side look much nicer and are hollow, whereas the kit scoops are solid. After comparing them I started the task of cutting the Kit cowls off and installing the Quickboost ones. I used a very thin saw blade to do the job. Be careful and take your time so as not to ruin the rear cowls of the kit.

Manufacture's Part Photo

Alpha Jet Landing Gear
Review Author
Rod Lees
Published on
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$14.95

I’d like to express my ongoing appreciation to Ross at SAC for continuing to provide us with review items; I know that everyone at IPMS/USA sincerely appreciates your contributions.

This is another in a series of “drop fit and direct replacement” metal gear for your models. In this case, the set is for the Kinetic-series of Alpha jets in 1/48. In my case, it is being used on my “Wingman” German aftermarket release of the kit, and as such, the weight of the resin cockpit, seats, and more make use of metal gear almost mandatory if you don’t want the “failed plastic gear” effect on your model. As an aside, the Wingman release is fantastic too, but that’s not the point of the review.

As you can see by the pictures, 11 parts are provided for this set, totally replacing the plastic parts in the kit. I will say that the metal parts have a bit more “crisp” look to them, and with no mold seam, you can install and paint with confidence.

Sample Cover

Aircraft Plans
Book Author(s)
Various
Review Author
Dick Montgomery
Published on
Company
Mushroom Model Publications - MMP Books
MSRP
$12.00

Mushroom Model Publications are available in North American from Casemate Publications.

MMP is expanded their excellent selection of scale plans for various aircraft. Sets No. 1 and 2 (detailed below) have been available for several years. In 2014 scale sets, 3, 4, 5, 6, and 7 have been released. One can see that the plans are of excellent quality and are filled with detail that many modelers value.

The pages, themselves can be removed from the publication and are suitable for framing, even suitable to decorate a display base! The price is right, the quality is excellent, and the subject matter is appealing.

Set No. 1 (978-83-89450-79-1 ) priced at $10.72, formatted in A4 Softcover, spiral wire binding 24 pages in A3 - Pages - 24 (0 in colour) contains plans in 1/48th for these aircraft: