Model Airplane Stand, Model Airplane Stand 1/32 Scale Arm Upgrade, and Model Armor Stand

Published: May 18, 2026
Company: War Dog Modeling

I saw these modeling stands mentioned in one of the chapter newsletters Mark Young compiles and sends to all members (sorry, can’t recall which one). I decided to purchase the sets mentioned above at https://www.wardogmodeling.com/. War Dog also makes a Model Ship Stand and a Model Car Stand. My stands arrived unassembled in a plain white cardboard box, so I don’t have any box art to show you. The box contains the parts in separate plastic bags, a copy of the order information, and that’s it. No instructions, but they aren’t really needed. Assembly is straightforward.

Overview

The stands appear to be 3D printed in gray and orange and come with the black O-rings already attached. The required metal bolts and hex… more

ModSand Detail Sander

Published: January 5, 2026
Company: UMM-USA

This handheld tool is designed to get into tight spaces like wing roots, intakes, or other tight or hard-to-reach spaces. It has four resin-like tips which are to be superglued to the tip of the tool, and sandpaper is to be attached to the tip with double-sided tape, or by using a self-adhesive sandpaper. I must admit that at first this seemed like a pain to set up, but it is very quick and easy. I tested the tip change out by removing the attached tip and prying it off with a hobby knife, and it came off cleanly and in one piece. I then glued on another tip, the one with the triangular point. I attached a small piece of sandpaper with double-sided tape and then trimmed the sandpaper to match the tip with my hobby knife, and the sander was ready to use.

As advertised, it works… more

Detail Sander

Published: October 23, 2025
Company: ModSand

This handheld tool is designed to get into tight spaces like wing roots, intakes, or other tight or hard to reach spaces. It has four resin-like tips which are to be superglued to the tip of the tool, and sandpaper is to be attached to the tip with double-sided tape. I have to admit that at first this seemed like a pain to set up, but it is really very quick and easy. I tested the tip change out by removing the attached tip and prying it off with a hobby knife, and it came off cleanly and in one piece. I then glued on another tip, the one with the triangular point. I attached a small piece of sandpaper with double-sided tape, and then trimmed the sandpaper to match the tip with my hobby knife, and the sander was ready to use. As advertised, it works well in awkward spots like wing… more

Mirage III FOD Covers

Published: October 23, 2025
Company: Quickboost

These FOD covers are a straightforward and simple addition to Eduard’s nice Mirage III. They come without instructions, but none are really needed beyond the one picture provided. Nicely cast in pinhole-free gray resin, they just need to be removed from the mold base, washed and painted. Detail is nice and pops out with a dark wash. Based on my references and internet photos I’ve found, these covers were usually painted yellow, although I did find a few in red. I painted one in each color to see how they would look. I used Tamiya white spray-can primer, followed by Vallejo medium yellow and red RLM 23 Model Air paints. After the paint dried, MiG Dark Wash was applied. (The wash is a bit heavy to make the detail more visible in the photos.) I dry-fitted the two FOD covers in place on my… more

SIAI-Marchetti SF.260/AM/M/W

Published: October 9, 2024
Company: Special Hobby

The SF.260 is a 1964 Italian design used by military forces around the world as a basic trainer. Sleek and aerobatic, it is still flown today by aerial display teams and Air Combat USA as well as private owners. The trainer version was in service for over 40 years.

Knowing my interest in colorful trainers, John Noack asked if I would like to review the kit. I jumped at the offer, cleared my workbench, and began this, my first ever kit review.

Special Hobby has been a producer of unusual aircraft for many years, and I have a bunch of their kits. As time has passed and technology has improved their models have gotten much more refined. This kit has fine surface detail, small sprue gates, and some flash. There are no ejector pin marks in visible areas, but there are small sink… more