Reviews

Review Author
Ned Ricks
Published on
Company
Werners Wings
Scale
1/35
MSRP
$16.00

History

In the early 1960s, the US Army’s Howze Board recommended testing new forms of mobility to make the soldier “free from the tyranny of terrain.” The result was the 11th Air Assault Division, to be rechristened the First Cavalry Division (Airmobile) and sent to Vietnam in 1965. Rather than moving to combat by truck or by foot march, as in wars past, the Cav rode in helicopters, lots of helicopters. Those many choppers, from OH-13s and OH-6s to CH-47s and UH-1s needed crew members and door gunners. This figure represents one of those aviators.

Review Author
Ned Ricks
Published on
Company
Werners Wings
Scale
1/35
MSRP
$16.00

History

In the early 1960s, the US Army’s Howze Board recommended testing new forms of mobility to make the soldier “free from the tyranny of terrain.” The result was the 11th Air Assault Division, to be rechristened the First Cavalry Division (Airmobile) and sent to Vietnam in 1965. One of the elements of the airmobile division was the Air Cav -- 1st Squadron (Air), 9th Cavalry, whose personnel paid tribute to their heritage by wearing black Stetson cavalry hats. Instead of horses or half tracks, the squadron used helicopters to scout for and fight the enemy. This figure represents one of those aviators.

Review Author
Eric Christianson
Published on
Company
Hauler
Scale
1/35
MSRP
$8.68

Hauler, a small company out of Czechoslovakia, continues to add to its list of quality aftermarket and modeling supply products; this time with a package of four 50 gallon steel barrels in 1/35th scale.

The package contains a single baggie containing four barrels mounted on backing blocks. No stencils and/or decals are included. The barrels are single-piece affairs, eliminating the need to remove that pesky seam line found on standard two-part barrels included in many armor kits.

The barrels are attached at one end to the backing block, and while the attachment is significant, the rim of the barrel keeps things pretty much in place during removal. A lot of resin dust is produced during this process, and unless you plan to carefully sand the cut end and scribe detail into it, you are going to lose the use of that end of the barrel on your model or diorama.

Review Author
Rob Benson
Published on
Company
UMM-USA
MSRP
$28.95

Thank you to Unique Master Models (UMM) for generously providing an excellent tool for “field testing.” Thank you as well to the IPMS Reviewer Corps for letting me be an evaluator.

The jig is akin to an adjustable protractor with a range of 0 to 180 degrees. The base plate is metallic blue metal with white, etched tick marks and numbers marked in 1 degree increments. A polished bar is screwed to the base plate at the zero position and an adjustable or positionable bar with a set screw can be locked between 0 and 180 degrees. Both plates are 3/16 in thick and project up from the base plate about 7/16 in. I checked the indicated angles on the jig with other tools and the angles match the precision of the jig, in other words, the angles on the jig are pretty darn good! The setscrew on the positionable plate held well and did not slip when the jig was dropped from about 5 feet onto a carpeted floor.

Review Author
Ron Bell
Published on
Company
Eduard
Scale
1/72
MSRP
$64.95

The Aircraft

The Bristol Blenheim was a fast day bomber designed for the RAF in the early to mid thirties. In its day, it was a fast, excellent aircraft. Unfortunately, its day was past when WWIl broke out. It was hopelessly outclassed by most modern fighters and was shot down in droves when un-escorted. It was quickly relegated to night intruder and naval strike missions and usage in less threatening environments. Despite attempts to upgrade it with new engines and other changes, it's performance remained sub-par and it was phased out as soon as was practicable.

The Set

This is one of Eduard's "Big Ed" sets that bundle all their PE sets and masks for a given kit in one package. In this case it consists of their exterior, interior, landing flaps and bomb bay PE sets as well as the mask set for the clear parts. If you bought them separately, they would cost a total of around $90, so you do save $25 buying them this way.

Review Author
Floyd S. Werner Jr.
Published on
Company
Eduard
Scale
1/48
MSRP
$12.95

I hate masking canopies. It always takes so long and it is not as much fun as the rest of the build. That is the primary reason to buy canopy masks.

The latest offering from Eduard is for the Kitty Hawk AH-1Z. Accurately cut from Kabuki tape, which I think is the best masking material out there, this set provides outlining for the side canopy sections. Each individual panel is constructed from two pieces of masking material which are then filled in with masking fluid. The overhead panels are actually single piece masks which is nice. The other parts that you are provided are for the turret clear parts.

These will fit and make the whole process of canopy masking a non-event. They will save you time and give you accurate crisp outlines with minimal work.

Highly recommended

Review Author
Frank Landrus
Published on
Company
Tarangus
Scale
1/72
MSRP
$29.95

The Kit

This is the first 1/72 kit by Tarangus, and follows their 1/48 SAAB Lansen A-32A and J-32B kits. Despite being a limited run kit, this is a major upgrade over the previously available Tunnan kits (Matchbox, Heller) and obviously the first as a J-29A or B. Of course the increase in accuracy does not correspond to an increase in buildability. I sincerely hope that Tarangus will expand this kit to do the later Tunnan versions. Hopefully the kit does well and we will soon see the reconnaissance version, S-29C, along with the later J-29E and J-29F with their distinctive dogtooth wings.

Review Author
Floyd S. Werner Jr.
Published on
Company
Delta One Decals
Scale
1/32

With the release of the Revell-Germany Bf-109G-6 and G-10 Erla it is just natural to want to put markings on them that aren’t included in the box.

Delta One has been providing some unique looking 109s on their decal sheets and this one is no different. The Croatians had a staffel similar to the Spanish staffel in JG-52. They were proud and carried the This decal sheet provides markings for seven aircraft, six G-6s and one G-5. Most of the aircraft sported the “Flying or Winged chessboard” on both sides of the fuselage.

Book Author(s)
Dariusz Karnas
Review Author
Rob Benson
Published on
Company
Mushroom Model Publications - MMP Books
MSRP
$4.95

Thank you to Mushroom Publications for bringing a tremendous digital resource for the modeler. Thank you to the IPMS Reviewer Corps for allowing me to test out this new and exciting method of researching model subjects. This digital publication is nearly identical in content to the paperback version [suggestion to editor: here is the link for the paperback review on the IPMS Review site.

Overview

I am very pleased with the increasing availability of research material in the tablet world. Interactive Panels allows an interesting reference experience for the WWII German aircraft modeler. Cockpit views of six different aircraft instrument panels are included, as listed:

Review Author
Greg Wise
Published on
Company
Airfix
Scale
1/48
MSRP
$24.99

History Brief

The Supermarine Spitfire Mk.I fixed its place in history during the Battle of Britain. The RAF pilots known as 'The Few' proved the Spitfire’s ability. Fighting alongside the Hurricane they overcame the struggles of the Battle of Britain over southern England and the English Channel during the summer of 1940. Powered by the Rolls-Royce Merlin V12, the Supermarine Spitfire was capable of speeds of over 360mph. Noted for remarkable maneuverability that allowed it to turn inside an opponent, the spitfire made it an excellent dog-fighter and it was the interceptor of choice for Fighter Command. Accordingly, RJ Mitchell's design is a time-tested aviation masterpiece, famous and beautiful too, first flying in 1936 and by 1940 it had become the envy of the world's air arms.