Towards the closing days of WW2 Germany was desperate for any type of functioning fighting vehicles they could get. This led to the mounting different weapons on any available chassis that they had. One of the weirder vehicles was created by mounting the infamous 88mm Flak 36 on a Panzer IV chassis. There is very little information available on this vehicle but it does appear to have at least made it to the prototype phase. The chassis was not modified with stabilizers, so there is some speculation that the 88mm’s traverse was limited to just a few degrees off front center, similar to the Ferdinand. Also the Panzer IV was not designed to handle the recoil of the 88mm so the recoil may have shattered the suspension when fired.

Dragon recently released this oddity in kit form, however, it appears that the kit may actually be just a re-boxing of an older Cyber Hobby white box kit that has become a bit of collector’s item.

The Aircraft

The Bachem Ba 349 “Natter” was another of those last-ditch attempts by the Axis powers to stave off defeat. The Japanese had the MXY7 “Okha” which was supposed to stop the US fleets off Japan. The Natter was supposed to shoot down the fleets of bombers which were reducing the cities of the Reich to rubble on a daily basis.

This is the first in a series of diorama modelling handbooks to be published by Mr. Black Publications (the second has also been released). Mr. Black is a relatively new, European-based company specializing in modeling ‘how-to’ books and modeling-related history books. On their website they also offer a small selection of vignette bases and some pro-built models.

This handbook is in the standard European A4 (roughly 8 ½” x 11”) format, and is printed on very high quality, thick matte paper. There are over 400 photos between the covers.

The contents comprise of 9 articles, each written by a different author, explaining the construction and detailing of vignette-style dioramas. The emphasis is on figure-related dioramas, and the contents are as follows:

Whether you have the Academy or the Eduard F-4C (same kit actually) there are little things that can be added to make it an even better kit. Eduard is known for its quality photoetch.

There are two brass frets are included in this set. One fret of photoetch is primarily the cockpit sill and canopy framing.

The second, larger one is an extensive upgrade for the landing gear wheel wells and doors. This is something that Academy probably should have done better, but the photoetch parts are easy to add and upgrade the area. The wheel wells are busied up to a more realistic look. Every door on the landing gear is treated to realistic pattern thanks to the PE. There are some parts for the drop tanks, missiles and bombs as well.

The fit of all the parts that I used were perfect for their application. The canopy frame required some minor bending but it added the missing detail to the canopy when posed open. The wheel wells reproduce the pattern in the wheel well.

A feature that you can quickly notice on the Sukhoi Su-9 Fishpot-B or Sukhoi Su-11 Fishpot-C is the complicated nose pitot tube. Although Trumpeter made a valiant effort in molding the Su-9 and Su-11 pitot tubes with its four separate vanes, the limits of the injection molding process come into play. I have used another set that used a combination of resin and photo-etch that was an improvement, but assembly was very difficult and the photo-etched vanes don’t really convey their 3-D nature. This Master Model set provides a quantum leap over any previous attempt to portray the Fishpot nose pitot tube. As a bonus, Master Model also provides the ability to build the less complex Fitter nose pitot tube seen on some models without the four vanes. Also included in this set are four brass missile head rails. You will find plenty of photos with red covers over the sharp pointy ends of these rails and there is a reason for that; they were sharp.