Reviews

Review Author
Pablo Bauleo
Published on
Company
HGW Models
Scale
1/48
MSRP
$20.46

UMM-USA is distributing a very neat model detailing item produced by HGW Models: riveting decals. To be completely honest, I don’t know if this set should be called a decal; it is more like a “wet” transfer than a traditional decal, but more on that later.

This set, for the 1/48 Tamiya P-47D Razorback, provides an easy way to add raised rivet details to the surface of your model. Arriving in a simple bag package, you get two sheets of continuously printed decals for a single Razorback. Note that I mention that they are continuously printed, as you will have to cut and trim each section before application.

Review Author
Jim Stepanek
Published on
Company
Revell
Scale
1/25
MSRP
$23.95

The Revell 1/25 scale ’70 Ford Torino GT is a wonderful kit with very little flash to be cleaned. The engine fits together very well, and the kit gives you two sets of valve covers and two different air filters. I chose the Lynx-type filter for its lower profile. The very nice chassis has separate suspension components and exhaust pipes. I replaced the kit exhaust extensions with aluminum tubing. The kit even comes with a set of slapper bars.

The interior has separate side panels, seats, and console. This is way all kits should be made! Each component features excellent engraving that just screams for extra detailing.

Review Author
Robert Head
Published on
Company
Trumpeter
Scale
1/48
MSRP
$48.95

The History

Trumpeter describes the history of its latest kit subject, the Cessna A-37A Dragonfly in 1/48 scale, on the box. The Dragonfly was developed from the T-37 trainer for combat service in Vietnam. A series of new components were applied to the aircraft, including: one GAU-2B/A 7.62 mm minigun, two drop tanks on the wing tips, three weapon stations under each wing, stronger landing gear, and two more powerful J85 engines. The new A-37As were affectionately nicknamed the Super Tweet. They were sent to Vietnam as part of the 3rd Tactical Fighter Group, 604th Air Assault Squadron on July 17, 1967.

Review Author
Charles Landrum
Published on
Company
Eduard
Scale
1/48
MSRP
$13.00

The KH-25ML is a Soviet/Russian LASER guided surface to air missile, designated AS-10 Karen by NATO. Its primary use was/is against hardened targets like fortifications, bunkers, or armor. In Afghanistan Su-25 crews started employing the weapon in the mid-80s to try to collapse cave entrances used by the Taliban. The CEP is cited at 4 meters. In addition to the Su-25 other Soviet era strike aircraft such as the MiG-27 Flogger, and Su-17M and Su-22M Fitter carried the weapon. These aircraft used nose mounted optical target tracking sensors with boresighted laser designators, for self-designation. While superseded by newer weapons, it can still be found in the inventories of many former Soviet states, Warsaw Pact countries and client states.

Review Author
Rod Lees
Published on
Company
Scale Aircraft Conversions
Scale
1/72
MSRP
$16.95

First, my thanks to Ross, the CEO of Scale Aircraft Conversions, for providing IPMS/USA with so many examples of his new products. I am certainly not paid to say any of this, but Ross and his crew have taken the metal landing-gear market by storm. Their cautious first releases were met with a chorus of “whys?” That was, until their metal was proven (a bad pun, but true).

My personal epiphany came after building the Revell 1/32 Ju 88 kit. The owner of my local, now-defunct, hobby shop tried to convince me to use a set of SAC gear, but I passed based on the cost. Of course, the kit’s plastic gear failed after two months. I had second thoughts, but I was not convinced to try the SAC products until a similar fate befell my 1/48 Roden T-28; the kit’s gear legs were so accurately scaled, the thin, soft-plastic of the nose-gear leg couldn’t hold the weight of the CMK resin engine I had installed.

Book Author(s)
Gordon L. Rottman
Review Author
Jim Stratton
Published on
Company
Osprey Publishing
MSRP
$18.95

US Marine versus Japanese Infantryman: Guadalcanal 1942–43 is the eighth volume in Osprey’s Combat series and the first dealing with an American fighting force in WWII. Fortunately, this volume deals with the US Marines. There are never enough references covering the USMC, so this volume is a welcome release.

This new book deals with the Marines fighting the Japanese infantry during the Guadalcanal campaign. However, it only deals with the first three months of the Marine’s involvement, concentrating on the three main battles that occurred during the three months: the Battle of the Tenaru in August, the Henderson Field attack in September and finally the Matanikau counteroffensive in October.

Review Author
Dave Morrissette
Published on
Company
Aerobonus
Scale
1/32
MSRP
$12.00

Aerobonus latest release is an oil draining cart used as a catch basin for motor oil. The set consists of eight resin parts and a decal sheet. The parts are in typical gray resin and are flawless. Parts removal is easy with careful trimming needed on the cart body and handle. Take your time and use a razor saw. A light sanding and you are good to go. The wheels are tiny as are the bolts to hold the handle. Be careful and things will clean up quickly.

I did notice one problem and that is the two bars that extend out of the front of the cart to hold the handle. Mine were broken off so i sanded them smooth and made a new set with strip in less than five minutes. Aires has protectors built into the casting block to prevent this but it didn't work in this case.

Review Author
Dave Morrissette
Published on
Company
Aerobonus
Scale
1/32
MSRP
$10.00

Aires Aerobonus line continues to pump out great add on sets for dioramas for kits and the latest release is a set of Compressed Gas cylinders in 1/32 and this time specifically acetylene tanks. The set has four casting blocks of materials. two of the blocks are the tanks with four bodies being provided. the remaining two block have the options for each tank. There are four closed tops and enough hardware to make the tops open and have gauges. the instructions show you both ways and the decision is the modelers.

Construction is simple. Cut the tank from the casting block and sand smooth. For the closed tank, cut the lid off and sand smooth and glue on the top of the tank. For one with the pressure regulator, cut the regulator and dial off and glue those on the tank as shown in the drawing.

Review Author
Rob Benson
Published on
Company
Revell
Scale
1/48
MSRP
$20.00

Thank you to Revell, Inc., for providing this kit for review. I had fun building the kit and trying new techniques while polishing older skills. Thank you to the IPMS Reviewer Corps for allowing me the opportunity to review this reissued classic.

The A-7A Corsair II is a distinctive former workhorse of many flying services. Two aircraft are represented by this kit, with markings options for a USN A-7A from VA-22, or a commemorative aircraft from the Portuguese Air Force, celebrating 64,000 operational hours.

Review Author
Charles Landrum
Published on
Company
Great Wall Hobby
Scale
1/48
MSRP
$81.99

The Douglas TBD-1A was a one-off aircraft built to compete for a Dutch requirement in 1939 for a float plane bomber, the Netherlands being blessed with a vast inland sea from which to operate. The Dutch were not interested and the aircraft was sold to the Navy for testing at Naval Air Test Center (later this center would outgrow NAS Anacostia and NAS Patuxent River would be built). The Navy had no need for a float plane version of it carrier aircraft, yet the Navy found the TBD-1A to be a stable torpedo and bombing platform, with the oversized floats only diminishing air speed by 20 knots. So theTBD-1A was reassigned to Experimental Squadron Two (VX-2) at NAS Quonset Point in Rhode Island (part of the 1st Naval District) where it would support the Newport Torpedo Station in the testing of aerial torpedoes. Since it was a float plane and could be closer to the action, the aircraft operated from an air facility at the south end of Gould Island in the Narragansett Bay off Newport, RI.