Eduard has come out with several photo etch sets for the 1/200 Scale, Merit, USS Hornet CV-8 (kit# 62001) and this is one of them. Part 4 provides detail parts to upgrade the 20 mm Oerlikon AA Guns.

The set includes a large sheet of photo etch with a lot of little parts. You get new gun shields and brackets, sights, forward and aft ammo drum covers with handles, elevation wheels and a harness for the gunner. Also included is a new deck (nice looking non-skid) that the guns sit on. You get two options one with the expended ammo canister and one without.

Assembly is straight forward but extremely fiddly. There are a bunch of very tiny parts that need to be bent and shaped. Most of the small parts are hard to hold and glue at the same time. This makes for a time consuming and sometimes aggravating assembly. Thank you Eduard for providing extra parts. There are only 30 of these mounts so pace yourself accordingly.

This set consists of six resin replacements for the gear doors of the recent Airfix A-4B Skyhawk kit. The new doors are one-for-one replacements of the kit parts.

The parts are cast in a tan colored resin and are delightfully thin. All six doors are attached to a single casting block, but the attachment points are very thin and easily removed. Once removed the only clean-up is to lightly sand the edge where the parts were connected to the casting block. I painted the parts with Tamiya paint which adhered with no problem and was pleased just how well the details popped out with a light black wash.

This set is highly recommended as a nice upgrade to a great little kit of the Scooter.

Thank you to Aires for the review sample and to IMPS/USA for the opportunity to review it.

Thanks to Aires for this excellent upgrade to the great Revell PV-1 Ventura model, and to IPMS leadership for providing it to me for review.

This set simply replaces the three-part kit cowling with a more detailed, one-piece cowling. Read on.

All you have to do is use a sharp knife, some quality CAREUL cutting time, and possibly a razor saw to remove the pour block from the back of the cowing. It uses gravity to ensure a full pour, and the resulting pour block might have utility in other places. I just used the multiple-cut pass method on the extreme-aft recessed panel line. A light draw of a sanding board on the back of the cowl when released, and I was done.

Eduard has come out with several photo etch sets for the 1/200 Scale, Merit, USS Hornet CV-8 (kit# 62001). This is Part 2 and includes several radar antennas to replace the kit parts. These new antennas simply step in and replace the undersize and under-detailed kit parts.

There are two sets to replace the forward- and aft-gun director antennas, one to replace the main search radar, and another to replace the main air search radar. You also get new doors, ladders and windows for the directors.

Assembly is straight forward but a tad fiddly. There are a bunch of tiny parts that need to be bent and shaped. The antennas for the directors require several complex bends that took a while to get the correct shape. Some of the small parts are hard to hold and glue at the same time.

Meng has released a second version of their excellent T-90A, this one with newly designed track and two optional front ends: a self-entrenching device, or a TBS-86 Tank Dozer blade. The twin electro-optical/IR ‘dazzler’ lights come complete with all electronic bits to make them light up, and a layer of nylon turret (composite armor) ‘skin’ add to an already interesting build.

The T-90 tank is protected by both conventional armor-plating and explosive reactive armor, and fitted with the Shtora-1 defensive-aids suite which includes an infrared jammer, a laser warning system with four laser warning receivers, a grenade discharging system which produces an aerosol screen and a computerized control system. It is also fitted with NBC (nuclear, biological and chemical) protection equipment. Altogether, the T-90 represents state-of-the-art Russian armor, and Meng has produced a masterpiece representing it in scale.