This is a photoetch Interior set to for the Revell Ventura MkII. This set is colored and adds a lot of needed detail to the cockpit and other areas. They really make the cockpit stand out.

In the packet is:

• 1 colored photoetch sheet
• 1 instruction sheet

Summary

This is a fantastic set for the set for a kit that needs them. I do find some of the small parts were very tricky to add. Also I would recommend install the assembled parts 34 and 14 into part 7 before you fully form it.

Thanks go to Eduard for providing this set to review and IPMS USA for allowing me to review it for them.

Every type of aircraft that has an ejection seat or explosive cartridges has a safety item that can be removed to make them safe to be around. That item is a Remove Before Flight safety pin. Every pin has a red tag attached to it so it can be removed before flight. Funny how that works.

Eduard has offered Remove Before Flight tags before in their normal line. They worked but they were very stiff. These new tags are much thinner and can be bent much more realistically.

Inside the usual Eduard packaging is one colored fret with coloring on both sides. The printed “Remove Before Flight” is only on one side. One set has some printing on the other side. The printing is crisp and looks great.

You will have to make the chords from wire. But that makes it easy to adjust the length of the flags.

Many thanks to Mr. Ross MacMillan of Scale Aircraft Conversions and the IPMS Reviewer Corps for allowing me to try this neat substitute and replacement set for the newly-released Zoukei-Mura F-4J Phantom II. I am pleased to report on another sweet add-on and upgrade from this company. The target kit has excellent detail and complexity making it a bit heavier than most, and having strong metal “legs” really helps!

The 7 white-metal parts arrived in a blister pack, backed by the distinctive SAC company logo. The weight of the parts is very noticeable. All parts are free of sprues and are nearly ready for priming and painting. The parts require very little buffing, cleanup and polishing. There are some barely-noticeable seams that readily retreat at the advance of a #11 blade!

The SC 50 was a small general purpose bomb used by the Luftwaffe in World War II. The bomb weighed between 48 and 55 kg and was produced in several different variants. It was carried by Luftwaffe bombers and fighter-bombers during the war. The bombs could be equipped with “screamers” which look like long whistles to make noise during flight.

This set provides eight SC 50 bombs and thirty-two very tiny screamers. The bombs are single piece units which are easily separated from the pour stubs. The screamers are provided in sets of 8 on 4 separate pour stubs. After removing the bombs from the pour stubs, I lightly sanded them on a piece of sandpaper taped to a small piece of glass from an old picture frame, making sure to keep the bombs vertical. This removed the remains of the pour stubs. Work slowly as the bombs are small and the fins are delicate. Fortunately I only broke off one of them, but it was quickly reattached with superglue.

THANK YOU to our friends and suppliers at Brengun for this sending us review items like this fuel tank cap set! And thanks also to the reviewer corps leaders for making them available to me to review….

This set takes the kit components and improves them by providing a more 3-d effect after installation. This simple set has different fuel caps for use on aircraft and, most assuredly, on other items in 1/48 scale. Included are 50 caps of various designs, sufficient for several WWII fighters

To use this set is actually simple; prepare the kit fuel cap area by removing any detail, and use a spot of gel or thick superglue (a VERY SMALL SPOT or you will have ooze) to hold the part in place.

I never would have thought a set like this would have utility, but when placed next to the kit part, I see the improved appearance.