Reviews

Review Author
Floyd S. Werner Jr.
Published on
Company
Aires Hobby Models
Scale
1/48
MSRP
$8.99

One thing that 1/48th scale helicopter modelers have been without for so long is the lack of armament. Hueys and Loach crewmembers normally carried the M-60 machine gun as protection for the aircraft and crew. Up until now there has been no available machine gun to hang in the door.

Packaged with a card stock backing, this set features four air M-60Ds. The guns feature the front mounted bipod mount molded on. Everything is there except the front gun sight, which in this scale would be almost unnoticeable. The detail on the machine guns is impressive. You may want to add the front sights, but depending on your configuration the guns may not have it. Along with the M-60s you get two small belts of ammunition. They will be fragile in this scale but they are a nice touch. I would have liked more ammo, but I am a gunship pilot and more ammo is always good.

Review Author
Floyd S. Werner Jr.
Published on
Company
Quickboost
Scale
1/48
MSRP
$4.75

If you want to mount your Frogfoot’s boarding ladder in the down position you will have a hard time doing that with the kit parts and you’ll still have to scratchbuild the area and the ladder. That is until now.

Quickboost provides you with this simple upgrade. Packaged in the typical Quickboost resealable envelope with card stock backing to prevent damage. This set contains four light grey resin pieces. The instructions tell you what you have to remove to add this set. It is relatively easy to do. Removal of the parts from the pour block is easy. It just takes paint to bring out the detail.

This will look great when added to the model. The boarding ladder, when lowered. adds life to your Frogfoot. This is the easiest way to add that little bit of detail at an inexpensive price with minimal effort. I like fast and easy.

Highly recommended

Thanks to Aires and IPMS/USA for the review copy.

Review Author
Dan Brown
Published on
Company
Dragon Models
Scale
1/35
MSRP
$82.00

I am not going to spend a lot of time going into the history of the King Tiger. This vehicle has long been an extremely popular tank in the armor modeling community. It was the one of the most famous vehicles fielded by the German army in the late days of WWII. It weighed in at an impressive 70 tonnes and was armed with the venerable long barreled 8.8 cm KwK 43 L/71 anti-tank cannon. This particular new boxing from Dragon represents a late model King Tiger with the Henschel Turret and Zimmerit.

Review Author
Floyd S. Werner Jr.
Published on
Company
Hypersonic Models
Scale
1/48
MSRP
$10.00

The Academy F-4 series of models are impressive models but they could benefit from a little bit of resin, especially in the cockpit. The F-4 cockpit, like most jets, is dominated by one item, the ejection seat. If you are going to add anything to your kit the ejection seat is that one item.

The parts are in a small Ziploc bag. Within that bag Hypersonic provides two seats. There are two seats and one gang pour block of the ejection handles. The ejection seat handles are safeguarded inside another baggie. A section of wire is included for the side of the seat. The casting of these seats in light grey resin is perfect. The detail is exquisite. The baggie is stapled to the instruction sheet which is folded into quarters. The instructions are on a single sheet of high quality paper. It is broken down into Navy and Air Force versions and has a painting guide for both types.

Review Author
Floyd S. Werner Jr.
Published on
Company
Hypersonic Models
Scale
1/48
MSRP
$7.50

The F-4 Phantom is an iconic aircraft. The new Academy kits do the aircraft justice, but if you have the Hasegawa kits these stabilators will work there as well. There are some things that can always be improved by the application of resin and photoetch.

There are three ways to use this set. You must decide which way you want to add these parts. The first way is to just replace the kit parts with the new resin ones. That is the least amount of work. The second option is to replace the kit stabilators and replace the molded-on cover plates with the PE parts from the set. And finally the third way is to use the resin and PE and set your angle of choice. You’ll have to decide which way to go. I recommend that you read through the instructions thoroughly and make sure you are using the Academy instructions when using the set on that model and vise versa.

Review Author
Floyd S. Werner Jr.
Published on
Company
Eduard
Scale
1/48
MSRP
$12.95

Eduard’s Bf-109G series of models is one of my favorite models. As such I tend to build a lot of them. They are a lot of fun to build and look great when completed. The Eduard decals are printed by Eduard, and are very thin and beautifully done. Because of their thinness, they fit into all the panel lines with ease, and the carrier film disappears. The only thing that I’ve had an issue with the thinness of the decals is that they stick real fast if you don’t have enough water under them. This is not a bad thing just an observation. Eduard has released this sheet of decals which contains enough different styles to do at least two aircraft.

The decals come in a typical European self-sealing/re-sealing plastic packaging. The decals are protected by a thick card stock between the decals and the instructions. The instructions are simple as they should be. You don’t need a whole lot of instructions for just these crosses.

Review Author
Mike Lamm
Published on
Company
PJ Production
Scale
1/72
MSRP
$5.00

Belgium’s PJ Production specializes in resin aftermarket accessories for aircraft, as well as, a few resin aircraft and vehicle kits, and a variety of figures for a variety of aircraft. Their series of pilot and crew figures range from WWI through modern pilots, and include seated and standing pilots for both civilian and military aircraft. They also have a number of crew figures to complete a diorama.

The review set provided included 2 RAF seated pilot figures from WWII. The pilots are seated with one looking to his right, and the other looking straight ahead. Both figures have their hands and feet in position to be in control of the aircraft and are wearing oxygen masks and the common yellow life vest over a leather flight jacket.

Review Author
Floyd S. Werner Jr.
Published on
Company
AOA Decals
Scale
1/48
MSRP
$20.00

This is the second sheet for the Hasegawa A-4 kit from AOA Decals. Like the others this is thoroughly researched with the help of the A-4 Skyhawk Association, notable pilots and mechanics. Who better to make sure that the markings are correct than the ones that were there?

The A-4 was a workhorse for the Navy and the Marines in Vietnam. As such it was operated from carriers and shore airfields. This sheet covers the Skyhawk from 1966 to 1972. Where a unit used both types or had early and later cruises, AOA selects an aircraft from both time frames.

Review Author
Floyd S. Werner Jr.
Published on
Company
AOA Decals
Scale
1/48
MSRP
$20.00

This third sheet by AOA Decals for the A-4 Skyhawk includes markings for twelve Vietnam era aircraft. This sheet is mostly Navy aircraft but there are two Marine aircraft.

The instructions are typical of AOA Decals being stored in a large ziplock bag with four double-sided 8.5x11 pages. Each aircraft is described in detail. The specific updates to the models are included on the first page. This addresses the correct antennas and the things needed to do the model properly. All the aircraft are Light Gull Grey over White but that is the only thing plain about them. They display full color markings from the front to the rear of each aircraft. The last page of the instructions covers the stencil location for both types.

Review Author
Floyd S. Werner Jr.
Published on
Company
Eduard
Scale
1/48
MSRP
$12.95

This small sheet addresses some short comings in kits sold overseas. The lack of swastikas. Now I’m not sure if it is just a typo or a way to get by overseas censors by calling them svastikas versus swastikas.

Either way you know what you are getting. Eduard prints their own decals and these are just perfect. They are printed on a 1.5 x 2.5 inch decal sheet. The decals are very thin and very crisp. You get 12 swastikas in two sizes. The normal Bf-109 sized swaskitas are 300mm. You get eight swastikas in this scaled size. Later in the war there were some slightly larger sized, 400mm, ones used on wooden tails. There are four of these.

The sheet is a good addition if you need some swastikas for your Bf-109 for your Bf-109G. Your F and E are available on other sheet. Those may have a white surround but these do not.