Shortly after Trumpeter released its new Su-33 Flanker D kit, Scale Aircraft Conversions released a replacement set for the kit landing gear. The set is comprised of five parts: two main landing gear legs, the nose strut, the nose strut retraction actuator, and the scissor link for the nose gear strut.

As with Scale Aircraft’s other sets, the parts are drop in replacements for the kit parts. After removing a slight molding seam on the parts, I polished them using a wire wheel in my battery operated Dremel tool at low speed. This works very well and results in a nice uniform finish to all of the parts.

History

Created to replace the piston-engined B-26 Invader, the twin jet engine tactical bomber B-57 Canberra was produced by US aircraft company Martin in the 1950s. Derived from the British aircraft EE Canberra it was produced in several versions to perform not only bombing but recon, electronic warfare, ground attack and dive bombing duties. The B-57B, developed for bombing missions, was the main version produced. It was characterized by the adoption of a new cockpit with two crew members arranged in tandem and under-wing hardpoints able to be armed with a wide range of weapons. The first units produced were armed with eight 12.7mm machine guns installed within the wings and later substituted with four 20mm cannons.

The Kit

Joining Trumpeter’s growing fleet of prime movers, this kit is their latest addition. The AT-T is a tracked vehicle, sharing the same components as a T-54. The kit and markings are for one vehicle. The color call out sheet shows this as a parade vehicle, white rims and markings of the Soviet flag. I chose to make it a grubbier vehicle with the Soviet red star (ironically enough, left over from another Trumpeter kit). Molded in the now customary grey Trumpeter plastic, there are ten sprues in the kit of which three are the tracks and two are the rubber road wheels. It includes one fret of PE, clear parts and one sheet of decals. The parts are nicely molded, but there are some prominent mold lines on some of the smaller parts that must be taken care of.

Scale Aircraft Conversions specializes in white metal replacement parts. Its line of replacement landing gear has been expanded to include a set for the 1/48 Hasegawa Mc 202 (also Eduard “Folgore”), and at least for the main landing gear, it can be used with the Hasegawa/Italeri Mc.205 “Veltro” as well. Perhaps the tail wheel, but I’m not sure.

The set includes 5 parts with the following breakdown: two main landing gear struts, actuator arms, and a tail wheel. The parts are finely molded in white metal. These parts are drop-in replacements for the plastic parts.

I should say that these parts are more than just drop-in replacements. Some of the white metal part would be comprised by the equivalent of several plastic parts, so you have an easier job of assembling the landing gear due to having fewer parts to deal with. In addition you don’t have to deal with cleaning seam lines.

Plus Model was established in 1990 in the Czech Republic. Their product range is comprised primarily of 1/35th scale resin kits, conversion sets, and accessories which are vacuum cast from polyurethane plastic. The company also has a line of quality dioramas made from a special hardened gypsum. Additionally, Plus Model sells styrene sheets of varying thickness and a wide range of printed-paper 1/35th scale accessories such as scale posters, road signs, rations boxes, tents, etc..

The subject of this offering is a 1/48th scale Shed. The kit consist of laser cut wooden parts, a small sheet of card stock, and five resin parts. The resin pieces are two Jerry cans, a spoke-wheel, a fifty-five gallon drum, and a toolbox/crate. The detail on all the resin pieces is superb. The laser cut wooden sections comprise the sides, top, and floor of the shed.