I have three or four of these magazines and have also written a review on volume 15. The magazine is always a good read and this issue is no different, there are fourteen articles in this issue. They range from a 1:72^nd scale Eagle Booster set (Space 1999) from Warp Models to 1:1 scale Galaxy Quest prop kits from Pegasus Hobbies.

This issue has the 3^rd part of a 3 part story on the designing of the Moebius Jupiter 2 which offered a chance for all of us to see what goes into designing such a kit ( I can’t wait to build mine). The article on how to repair a damaged Snow speeder has great information that should be of help to all who have had some mishaps happen to our models such as kids and the cat all come to mind.

The F-86F Sabre happens to be my favorite jet aircraft so when this kit was given to IPMS for review I almost begged to do it.

This kit is not in a scale I normally build but since it was one of the only Skyblazer scheme F-86s, I just had to do it. I was not sorry. Upon opening the box the first thing that amazed me was the size of the decal sheet. It is huge and had every bit of the great color scheme in decal form so I did not have to mask and airbrush anything.

The cockpit was adequate with decal instruments and side consoles. The seat was fine with the belts molded in. I liked the way that the cockpit fit with the intake trunk and front landing gear bay. When assembled, it became foolproof with the L/G well in just the right place and the same with the cockpit.

ALC306 Bottle White Primer & Microfiller

ALC309 Bottle Black Primer & Microfiller

Never resting on his laurels (or whatever else he might call them), Tony Hipp, inventor of Alclad II, does it yet again. As I have stated in several “how to” articles on this product, I couldn’t stress enough the subject of surface preparation prior to applying the metal finishes. If any sanding scratches were present, they would require a base coat of a primer with filling capabilities, then sanding and polishing so that in the case of the “high shine colors”, a gloss black primer could be applied, followed by whatever finish coat was desired. These new offerings cut down on the workload substantially, in that these primers may be applied, sanded and polished to the desired sheen and followed by any of the Alclad II metal finish coats, thus eliminating one or two full steps and drying time.

OK guys, a show of hands; how many of you don’t like Hasegawa kit decals? You’ve had bad experiences with them and hate ‘em to the point that you won’t build or even buy a given Hasegawa kit unless you can get aftermarket decals for it? Not a problem for those F-Teen kits where you easily have many more aftermarket decal choices than kits. However, when it came to cool looking, non-gray jets, like the Mitsubishi F-2, you were stuck….until now.

Subject

In the late 1970s, Porsche was dominant in GT and sports racing. For the 1978 race season, Porsche designed the 935/79 Turbo with the goal of claiming the Le Mans 24 hours title. The new longer, ground-hugging body of the car pushed the limits on the silhouette regulation. Due to the 935/78's unique body design, the vehicle earned the nickname "Moby Dick". The vehicle featured a 3.2 liter, air-cooled twin-turbo engine with four valves per cylinder and Porsche's first liquid-cooled cylinder heads, which produced 850hp. The race team entered the 935/78 Turbo in the World Championships for Makes Round 4, as a test for the Le Mans race, and in an impressive debut won. At the 1978 Le Mans 24 Hours, the 935/78 qualified 3rd, but fell to an overall 8th place finish as a result of mechanical problems.