Reviews of products for scale military vehicle models.

Book Author(s)
Editors of Model Art
Review Author
Jeffrey Brown
Published on
May 26, 2011
Company
Model Art
MSRP
$37.95

This book is the second of a series on German armor in World War II. These are written specifically for the AFV modeler. The subject of the book is the Tiger I. It is written entirely in Japanese with English subtitles on some of the pictures and illustrations.

The book begins with an illustration of the driving mechanism and part of the transmission. It is taken from the German manual on the Tiger I. These pictures are without English subtitles. Next the book shows us 18 color plates of the Tiger I from the early version to the late version. These illustrate camouflage patterns and markings. These are very good color renderings in fact. The title of each drawing is in English.

After the color plates, there is a short section, once again entirely in Japanese, which appears to discuss the formation of Tiger units. After the Tiger unit part is a small comic book like section covering some of the great Tiger commanders.

Book Author(s)
Davis Fletcher, illustrated by Henry Morshead
Review Author
Jeff Leiby
Published on
May 17, 2011
Company
Osprey Publishing
MSRP
$17.95

The British developed and employed the first full-tracked armored fighting vehicle and continued to improve the design throughout the First World War. The result was the Mark V tank in 1918.

This book, number 178 in the New Vanguard series published by Osprey Publishing, describes the development of the Mark V and Mark V* tanks from the earlier Mark IV, crew duties, combat deployment, and further improvements at the Christchurch development center. The text provides a pretty inclusive discussion of the development of the Mark V and its larger siblings the Mark V* and V**. The discussion of combat operations is basic but does give an idea of the improvement of the faster Mark V over earlier models.

Review Author
Greg Wise
Published on
May 16, 2011
Company
Dragon Models
Scale
1/35
MSRP
$51.00

History Brief:

The GermanWehrmacht and Luftwaffe grew into a powerful military machine during the last half of the1930s under Nazi control. They were very well equipped with all the latest and greatest weapons the world had ever seen. When the early weapons and training were tested in Spain confidence grew and then they seemed unstoppable blitzing through Europe at will.

As the war progressed so did the inventory of halftracksthe Wehrmacht and Luftwaffe operated, listing several types and sizes of halftracks each with a specific purpose. Our subject the Sd.Kfz.10 was one of the lighter types. Initially conceived as a utility tow for small towed guns, several different specialist vehicles were based on this halftrack design including Sd.Kfz.10/5, its rear hull was refitted with a purpose-built anti-aircraft platform carrying a 2cm FlaK38 platform. Around 14,000 Sd.Kfz.10 halftracks were built from 1938-45.

Review Author
John Lyons
Published on
May 9, 2011
Company
Bronco Models
Scale
1/35
MSRP
$39.95

Short History

The YW-531a was the first APC manufactured by Norinco for the PLA. It was designed in the early 1960’s and first appeared in 1964. It can carry a crew of 4 to 10 troops. The YW-531 was first used in the Vietnam War by the North Vietnamese Army (PAVN) and was in action again in the Iran-Iraq War.

APCs are usually armed with only a machine gun although variants carry recoilless rifles, anti-tank guided missiles (ATGMs), or mortars. They are not usually designed to take part in a direct-fire battle, but to carry troops to the battlefield safe from shrapnel and ambush. Amor on APCs is usually composed of simple steel or aluminum, sufficient for protection against small fire arms and most shell fragments. Just about any type of anti-tank weapon can defeat the armor of an APC. Some APCs also come with NBC protection, which would protect its crew from radioactive fallout or the like.

Book Author(s)
Ralph A. Riccio
Review Author
John Ratzenberger
Published on
May 6, 2011
Company
Mushroom Model Publications - MMP Books
MSRP
$58.00

I am a Rolls Royce Armored Car mega-fan, so I pleaded for this book when it showed on the review list. Also, my real name is Sean O'Ratzenberger ….

The book covers wheeled and tracked armored fighting vehicles used by the armed forces of the Republic of Ireland from independence to the present day. It, of necessity, starts before then, in 1916, and works forward through the civil war as much of the armor was first used by the British and then acquired by the Free State (National Army) or captured by the Republican Army. This story is told in some detail. From there, the book covers the Irish forces during The Emergency (WW2, in which Ireland was neutral) through various UN peace-keeping operations.

Following the general and organizational history, there is a lengthy section which goes one-by-one through all vehicles used, having history, data, pictures, etc., for each. Some of this information duplicates that already told in the historical sections.

Review Author
Tom Moon
Published on
April 26, 2011
Company
Trumpeter
Scale
1/35
MSRP
$47.95

Layout of the Sprues:

  1. Sprue A - Cruciform base and extension legs
  2. Sprue A4 – Cruciform base top
  3. Sprue B – Parts for Travel carriages and bits for Cruciform base
  4. Sprue C x 2 – Parts for Travel carriages and bits for Cruciform base
  5. Sprue D – Shield and base parts of the Gun
  6. Sprue E – Plastic barrel and small parts of the gun
  7. Sprue WA – Shells and shell casings
  8. Photo Etch A – Shield
  9. Photo Etch B – More shield parts and ready round box
  10. Photo Etch C – Shell base
  11. Other Parts – Metal Barrel, metal tube, Rubber tires

Steps 1, 2, & 3 – Building of the Cruciform base

Review Author
Tom Moon
Published on
April 26, 2011
Company
Bronco Models
Scale
1/35
MSRP
$34.95

Sprues

  • A – This sprue contains the barrel, shield, and gun cradle
  • B – This sprue contains the ammo and ammo crates
  • C x 2 – Tires
  • E – This spure contains the tubular ammo cases
  • G – This sprue contains parts for the gun, shield, gun cradle and a lot of unused parts from Kit 35045
  • H x 2 – This has the wheel and hand wheels
  • N – This has the trails and associated bits
  • P – Photo Etched parts

This kit is a representation of the rebuild of a captured Soviet Divisional Gun. The anti-tank performance of the F-22 divisional gun was inferior to the 7.5cm PaK40. However, the Germans had captured over 500 of these guns and made use of them.

Review Author
Michael Novosad
Published on
October 19, 2021
Company
AFV Modeller
MSRP
$14.95

Format

The cover for this issue has a stunning image of Jose‘ Dusquesne‘s Pz. Kpfw. 38 (t). The publication is printed on medium-weight glossy paper, with color images on every page. In some article there are several images numbered and keyed to the text. This issue contain 64 pages.

Contents

The first article is by James Bond, and features The ICM kit of the Russian B-35, “Land Battleship”. The author put a great deal of effort into this model, and several in-progress images are included. The Fruil tracks used in this build were 24” long, and when wound about the suspension should be a model over 10” long. A land battleship for sure. Informative building techniques offered to the reader.

Review Author
John Lyons
Published on
April 22, 2011
Company
Bronco Models
Scale
1/35
MSRP
$39.95

Short History

The YW-531a was the first APC manufactured by Norinco for the PLA. It was designed in the early 1960’s and first appeared in 1964. It can carry a crew of 4 to 10 troops. The YW-531 was first used in the Vietnam War by the North Vietnamese Army (PAVN) and was in action again in the Iran-Iraq War.

APCs are usually armed with only a machine gun although variants carry recoilless rifles, anti-tank guided missiles (ATGMs), or mortars. They are not usually designed to take part in a direct-fire battle, but to carry troops to the battlefield safe from shrapnel and ambush. Amor on APCs is usually composed of simple steel or aluminum, sufficient for protection against small fire arms and most shell fragments. Just about any type of anti-tank weapon can defeat the armor of an APC. Some APCs also come with NBC protection, which would protect its crew from radioactive fallout or the like.

Review Author
Michael Novosad
Published on
April 17, 2011
Company
Dragon Models
Scale
1/35
MSRP
$49.99

History and Performance

The references I used for this review include Panzer Tracts No 20-1, Paper Panzers, and Germany’s Tiger Tanks VK 45.02 to Tiger II.

The production contract to build these vehicles had been awarded in February 1942. The subject vehicle for this review never made it to full production. Several turrets and hulls were completed, but because of significant problems with the Porsche designed and built engines and suspension the contracts for the production series were terminated in November 1942. The fifty turrets manufactured for this vehicle eventually were used on the first 50 Tiger II tanks, and were known as the “Porsche“turrets...