Brengun Models is a scale model and detailing parts manufacturer located in the Czech Republic. Their lines include limited production run multi-media kits and exquisitely detailed photo-etched, turned brass and white metal replacement parts for aircraft in the most commonly produced scales.

Brengun has produced a set of FuG-200 Antenna to fit any appropriate 1/72 scale Luftwaffe aircraft kit.

This set supplies drop-in replacement wheels for 1/72 F-16 C/D Block 40 and later kits.

As you would expect from Brengun, the wheels are very finely cast featuring realistic tread pattern, raised lettering and other markings on the sidewalls and sharply detailed brake pads and wheel hubs. I compared them to the wheels of a Tamiya F-16CJ kit and as shown in the photos, the detail on the Brengun parts is a vast improvement over the kit wheels. Each tire also has a flat spot to simulate the weight of the aircraft on the tires, however, it is not overdone so that the tires look flat.

I painted the wheels Tamiya NATO Black and the rims/brake pads Tamiya Flat White, with a black wash to bring out the details. I used a white colored pencil to highlight lettering and markings on the sidewalls.

The wheels have round mounting holes on the back side, so they should be adaptable to just about any 1/72 F-16C/D Block 40 and later kit.

Highly recommended.

Value Gear resin products are well known to most modelers for the excellent quality resin stowage and gear for models and diorama scenes. Owner Steve Munsell is a quality guy who more often than not throws in some extra pieces to most of the packages and one package can often inhabit more than a couple builds if used wisely- or you can completely deck out one model if you wish. His 1/16 product lines are growing as more companies release more 1/16 scale kits.

What’s Inside the Box

This set is the perfect complement to the Andy’s Sherman kit or to any American tank in the scale you may have. As always, the quality is amazing on this scale and there are exactly 14 pieces as the label says. In the first photo, there are five identical packs that can be strapped to a turret or placed inside a vehicle, a wrapped-up tarp with rope and strap around it, and a large piece of stowage for the deck with a number of wooden crates covered by a tarp.

For anyone hardy enough to tackle a WWII Fiat G.50 fighter plane in 1/144 scale, this PE set is for you. Measuring in at 1 ¼”x 1 9/16”, there are extra PE details for the cockpit (including the seat), engine and landing gear; there is also a small piece of film to be used on the interior of the cockpit door. This PE set is made for the Italian G.50, specifically the Mark I Models kits (of which there are three).

As this PE set is for an Italian fighter plane, it could also be described as “piccino”, “minuscolo”, or “minuto”, no matter how it is described, it is tiny and the whole fret could be lost in a deep shag carpet. To really appreciate the detail, take a look at the completed PE in the model on the Brengun webpage (https://www.brengun.cz/e-shop/1-144-accessories-19/fiat-g-50-(mark-i-ki…).

This product consists of two vacuformed canopies for FW-190 and TA-152 kits in 1l/72 scale. One canopy is the early flat variety, while the other is the “blown hood” type. The instructions state that they can be used for the Airfix, Frog, and Revell kits, but given the fact that there are numerous kits of FW-190 variants in 1/72 scale, these canopies should be useable for almost any of the available kits, although my experience shows that many of the available FW0-190 kits have totally accurate canopies, and do not require replacements. One use might be to use this type of canopy to display an open canopy to show cockpit detail, as they are very clearly molded.

Order several of these from Squadron and you’ll have one when you need it. Highly recommended. Thanks to Phil Peterson and Bill O’Malley for the review sample.