Review Author
Ed Kinney
Published on
September 3, 2011
Company
Scale Aircraft Conversions
Scale
Various, see review

Well, here it is September already, and our busy beaver fellow IPMSer Ross McMillan follows through with 6 new releases, including one for the all-new Tamiya 1/32nd P-51D Mustang.
As always, crisply cast with only minimal flash and very little cleanup required. Many thanks for the review samples! Keep up the great work.

Review Author
Jim Pearsall
Published on
November 30, 2021
Company
Eduard
Scale
1/72
MSRP
$34.95

The Contents

You get a heavy duty envelope with 4 plastic sleeves inside. You get:

  • 73355 PE, one self-adhesive mostly cockpit, and two really big PE frets for interior and exterior detail
  • CX257 Canopy and Wheel mask
  • 73008 Remove Before Flight Tags

You also get 2 full pages of instructions, folded so that you have 8 separate half pages of instructions, plus a half page instruction for the masks.

The Aircraft

The F/A-18 Hornet has been around for a while, and it looks to be almost as big a winner as its predecessor, the F-4 Phantom. One of the stories going around St. Louis in the 90s was that the plant wanted to build 5058 Hornets, one more than the production run for the Phantom. Well, the production line is still open, and they’re past 1100 now.

Review Author
Greg Wise
Published on
September 2, 2011
Company
Cyber-Hobby
Scale
1/35
MSRP
$29.95

The Jagdpanzer IV was a tank destroyer based on the Panzer IV chassis and built in three main variants. As one of the casemate-style turretlessJagdpanzer (hunting tank) designs, it was developed against the wishes of Heinz Guderian, the inspector general of the Panzertruppen, as a replacement for the Sturmgeschütz III (StuG III). Guderian objected to the needless, in his eyes, diversion of resources from Panzer IV tank production, as the Stug III and Sturmgeschütz IV were still more than adequate for their role. After the Battle of Stalingrad in September 1942, the Wehrmacht arms bureau, the Waffenamt, called for a new standard for assault weapons: 100mm of armor to the front, 40–50mm on the sides, wider tracks, ground clearance of 50cm, top speed of 26 km/h, and the lowest possible firing positions. The new Panzerjager (tank hunter) design would be armed with the same 7.5cm gun as fitted to the Panther: the Pak 42 L/70.

Book Author(s)
Stephen Zalgoa, editor
Review Author
Marc K. Blackburn
Published on
September 1, 2011
Company
Osprey Publishing
MSRP
$25.95

One of the newer series of Osprey Publishing is the “Duel” series. As the name suggests, it provides an in-depth look at two pieces of equipment and compares and contrasts their capabilities in the context of a particular battle. To date, there are forty separate titles. Many of these concentrate on armor. Osprey has packaged five of these titles into one book:

Book Author(s)
David R. Higgins
Review Author
Marc K. Blackburn
Published on
September 1, 2011
Company
Osprey Publishing
MSRP
$17.95

Osprey’s series “Duel” is adding another title - King Tiger vs. IS-2. As with previous publications, the book focuses on the design, development, and capabilities of these two well-known vehicles that debuted in the last eighteen months of the war in Europe. While the book does not offer much in terms of reference material for building the penultimate King Tiger or IS-2, it provides the necessary context for understanding the origins and development of these vehicles and how they performed on the field of battle.

Review Author
Michael Novosad
Published on
November 8, 2021
Company
Master Box Ltd
Scale
1/35
MSRP
$33.99

History and Performance

The Type 170V made its first appearance as a military vehicle in 1937. The frame was made from a tubular X-shape, with independent front and rear suspension. The car was powered by a 38 hp, four-cylinder engine. A total of 86,615 170V cars were built by 1942, and it was the most popular “civilian“ vehicle used by the Wehrmacht.

The vehicle was also built after the war by Daimler-Benz in a diesel-powered version. It proved to be very popular based on its proven wartime experience. With some research, the modeler may be able to depict a post-war vehicle with this base kit.

Master Box Ltd originates in the Ukraine. This is my first build by this manufacturer.

Kit Review

Instructions

The instruction sheet is an oversized fold-out map style, with instructions on both sides.

Review Author
Andy Renshaw
Published on
August 31, 2011
Company
Great Wall Hobby
Scale
1/35
MSRP
$90.95

I’ve always been interested in self propelled flak guns, whether on a truck or tracked vehicle. Maybe it’s the interesting combination of equipment that makes some very unique looking vehicles. For several years I had the old Italeri sWS kit hanging out in the closet, along with some various details with the idea of building it someday. Lo and behold a new company, Great Wall Hobby, comes on the scene with all-new tool sWS. I hedged my bets and figured they would eventfully release some of the self-propelled flak halftracks based on the sWS. Sure enough, I didn’t have to wait long!

Review Author
Robert Folden
Published on
August 31, 2011
Company
Aires Hobby Models
Scale
1/32
MSRP
$47.95

The EF-2000A Typhoon, otherwise known as the Eurofighter Typhoon, the one of the latest generations of advanced technology fighters. Since its debut, several kits have been released, including the Revell and Trumpeter 1/32 scale kits. While I have not yet seen the Revell kit, the Trumpeter version is a great kit, but sadly is lacking in the pilot’s office. Once again, Aires to the rescue! Aires has released a great cockpit set for the Typhoon. While the set is designed for the Revell kit, I found it also fits great in the Trumpeter kit. The set is cast resin with a high level of detail, and few, if any, casting defects. The set also includes a set of flexible cast oxygen hoses, a clear cast HUD glass, and a fret of photo-etched metal parts.

Review Author
Robert Folden
Published on
August 31, 2011
Company
Pegasus Hobbies
Scale
1/72
MSRP
$12.95

Pegasus Hobbies is a small model company that, while geared mostly towards war gaming, has produced some very nice models over the past few years. I’ve built a few of their models, so when their new Panzer 38T came up for review, I jumped at the opportunity.

The Pegasus Hobbies Panzer 38T kit actually contains two full kits. Each tank comes in 27 pieces on 4 sprues. Since the model is aimed at gaming, construction is very simple, with the entire suspension, road wheels and sprockets, and tracks molded as a single piece. Detail throughout the model is crisp, and while it may be a bit over sized, this helps later with weathering. The only real downfall to the molding is that the main and machine guns are solid and need to have the ends drilled. [Not the hardest task, yet the machine guns do take a steady hand to drill]. Additionally, there are no decals included in the kit.

Book Author(s)
David Wragg
Review Author
Brian R. Baker
Published on
August 30, 2011
Company
Pen and Sword Books Ltd
MSRP
$32.50

The Story

This volume is a newly developed account of the naval war between the United States and its Allies against the Japanese from 1941 through 1945. Since the author and publisher are British, it naturally follows that there is a subdued emphasis on the British and Commonwealth participation in the war, a good thing since this topic has not been covered in a lot of detail over the past few years. In a little over 200 pages, the author condenses the topic to the point that it isn’t really a comprehensive history, but instead a series of chapters dealing with specific issues and events associated with the war, along with his interpretations of the causes and effects of these events.