Review Author
Rod Lees
Published on
June 10, 2018
Company
Eduard
Scale
1/32
MSRP
$80.00

(No preamble this time; only building reports. )

The remaining item I tackled here was the seat itself. The Eduard set 32 920 included in the big Ed set has a very well-done P-51 seat, complete with the aft stiffener, and some other little details. It is pretty well self-explanatory how to fold it all into place. The seat requires some gap-filling superglue to properly assemble, as there is little surface on which to have the glue “Grab” the other parts, and hold together while under handling. Once these are complete, the armor plate is cemented into place.

Review Author
Rod Lees
Published on
June 10, 2018
Company
Eduard
Scale
1/32
MSRP
$80.00

Thanks as usual go to our prolific supporter, Eduard, for sending the IPMS/USA review team this BIG ED for the new Revell 1/32 P-51D-5 series Mustang. This was another in my series of “On-the-road” reviews, and as such the background will change… a lot. I had misplaced the review item before I left the house while cleaning up my work area, and right before I left in desperation I sent an order to Sprue Brothers to please send me a replacement, (after I used my credit card), to handle on the road. I also asked they annotate my name and the point I was a guest in the “GJOEHOFOE” hotel in California. This was dutifully marked in large, clear lettering on the front of the box, and as such there was no confusion about who the guest (Me) was, or what do to with said package. It got there on Wednesday afternoon, three days before I left for the hotel-hopping part of my trip (where much of the work you see here was done). Onward!

Review Author
Rod Lees
Published on
June 10, 2018
Company
Eduard
Scale
1/48
MSRP
$39.95

IPMS/USA thanks the Eduard team once again for sending us this simple, excellent set for the new Eduard FW-190 series. And thanks to Phil and John for obtaining the sets for the team…

This set consists of perfectly cast resin parts for the back of the engine, guns, cowl bits, plus a few bits of PE including parts for the armored windscreen and cowl latches. MUCH easier than scratchbuilding!

This upper fuselage gun bay set is a simplified version of the advanced set with the engine abbreviated, i.e. just the gun bay parts and engine mount war part of the set, not the whole engine; the accessory section the intake distributor tube are also provided Since I had built the entire “bigger” set earlier, I knew what to expect.

The gun bay was simpler, particularly with more lighting and my magnifier to hand. The next one of these will be perfect, I swear…

Review Author
Andrew Birkbeck
Published on
June 7, 2018
Company
Tamiya
Scale
1/48
MSRP
$36.00

Background

The British Churchill tank was one of the most important tank designs introduced by the British after the start of the Second World War. Following the collapse of the French armies at the hands of the invading Germans utilizing Blitzkrieg tactics, British forces lost most of their front line military equipment in France in May 1940. The British reevaluated their previous views on the purposes and uses of tanks following these losses, and came up with more modern designs, the Churchill tank being a prime example. It was heavily armored, and with the introduction in 1943 of the Mk.VII, better armed, sporting as it did a 75mm main gun capable of firing both high explosive and armor piercing rounds. In preparation for the D-Day Invasion in June 1944, various “specialized” tanks were dreamed up, including a flame throwing version of the Churchill, named the Crocodile.

Review Author
Allan Murrell
Published on
June 7, 2018
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$17.95

This is a white metal landing gear set is to for the Sword 1/48 English Electric Lighting T. Mk4/5 aircraft.

The white metal parts are good are have better defined details than the original kit parts. They are a very good replacement for the already well details kit parts. The advantage is these white metal parts will provide more strength and last longer than the kit parts.

The parts include the main two gear struts components that replaces part numbers 78, 79, 27, 57, 56, 60 and 61. The front strut parts which replaces part numbers 7, 84 and 59.

The parts are well cast; you do need to sand off the few cast seams and metal pour points. The parts were a perfect fit to the existing mount and were easy to assemble.

I recommend these parts are a great addition to an already extremely well detailed kit.

Thanks go to Scale Aircraft Conversions for providing this set to review and IPMS USA for allowing me to review it for them.

Review Author
Frank Landrus
Published on
June 7, 2018
Company
Aires Hobby Models
Scale
1/48
MSRP
$6.50

Quickboost has released two Parabellum WWI aircraft gun resin details sets, 48 813 (LMG-14) and 48 814 (LMG-14/17). The Parabellum 7.9mm caliber LMG 14/17 was an upgrade of the LMG-14, which itself was a redesign of the MG 08 (The MG 08 was an adaptation of the Maxim machine gun). The LMG 14 was used primarily in German bombers (i.e.: Gotha G.IV), reconnaissance aircraft (i.e.: Halberstadt CL.II), and zeppelins, although it did see some limited use early on with the Fokker Eindecker E.I prototypes. The LMG-14/17 featured a thinner air-cooling jacket, redesigned controls, and an added mounting rail for a telescopic sight. I have included a photograph comparison below of the LMG 14 vs the LMG 14/17 out of the Wingnut Wings 1/32 Junkers J.I kit for reference.

Review Author
Ben Morton
Published on
June 7, 2018
Company
Hauler
Scale
1/72
MSRP
$38.00

This complete resin and photo-etch kit from Hauler represents the F-55 Feuerlilie (Fire Lily). As mentioned above, the kit also includes the modified 88mm anti-aircraft gun launch platform. If your thinking that this release looks kinda familiar then you'd be right. This kit has previously been available under the Extra TECH banner.

The AA missile is comprised of seven light gray resin bits which are easily removed from the pour stubs. The missile body has some lovely engraved panel lines as well as the detail of the thrust nozzles on the aft end of the F-55.

The guidance wings, which exhibit their own engraved detail, are all of two pieces to which are added two winglets per wing. After assembling the F-55 missile all that's left to do is decide what color to paint it. This was a prototype weapon, so just about any shade of gray would be accurate, as would natural metal. Let your imagination run wild.

Book Author(s)
Victor “Troy” Failmezger
Review Author
Allan Murrell
Published on
June 7, 2018
Company
Osprey Publishing
MSRP
$16.00

This book goes into great detail about the history and combat experience of the first US tank destroyer battalion. It takes you from the unit’s formation to the Kasserine pass to Anzio, Operation Dragoon to the final attacks on the Third Reich, this is the fascinating story of the men and machines fighting against Germany’s best. This book tells the technical details and origins of the 601st Tank Destroyer Battalion, it allows you to be at the front during the European war.

As the war developed it become very clear that the allies needed to have a way to defeat the German panzers on the battlefields. The answer was the formation of a new type of battalion, the Tank Destroyers.

Book Author(s)
Steve Ginter and Joe Weathers, Jr.
Review Author
Frank Landrus
Published on
June 7, 2018
Company
Ginter Books
MSRP
$52.95

Author Steve Ginter is a noted military historian who publishes the Naval Fighter series that was founded in 1980. After graduating from California State University-Northridge, Ginter became a US Navy pilot, serving from 1966 to 1972. Upon leaving the US Navy, Ginter held a series of management positions within the Thrifty Drug chain for the next twenty-one years. In 1996 he became the CEO of Sentai Distributors where he directed company operations until 2011. The Air Force Legends series was initiated in 1998 with the publication of ‘The Martin XB-51’.