Product

The oil radiators come packaged in the typical clear cellophane and a cardboard insert that Quickboost has become known for. The parts are cast in a light gray resin and are very sharp features. The parts are designed to be used on any of the excellent Tamiya 1/72nd Mosquitos.

Application

When removing the parts from the pour block, use care as the resin is very thin. Don't worry about getting the part cleaned up real good at this point, you can do that once it is attached to the model to give it some extra support. Next you will need to trim the kit part. There is several raised straight lines that will have to be removed (see photo). Once they are removed and the area is smoothed out you attach the resin. I used Gator grip glue to attach the parts as it gives you time to set the part. Once the part was set I finished cleaning it up.

These two pieces are a vast improvement over the kit part. I highly recommend these if you are looking to improve the already nice Tamiya Mosquito.

I would like to thank Aires - Quickboost and IPMS/USA for allowing me the opportunity to review this set.