Reviews of general scale modeling products such as paint, glue, etc.

Review Author
Greg Wise
Published on
October 16, 2013
Company
JH Models
MSRP
$8.00

The Product

Described as a highly flexible, softened, transparent gray film suitable for uneven surfaces and producing templates for applying paint by a brush or airbrush with reduced surface tack.

The Working Test

I decided that a current review project was to be the test subject, a 1/72 scale Cobra helicopter. I believe the film should be cut by scoring the film and removing it from its backing. I found cutting the film and backing material together a little fussy, even while using a new #11 X-Acto blade. The film is very pliable and stretches easily. The adhesive tack strength is a couple clicks below Tamiya tape.

Review Author
Pablo Bauleo
Published on
September 16, 2013
Company
UMM-USA
MSRP
$22.00

Once, I heard that a “modeler can only be as good as his tools”. While I think some modelers can be better than their tools, I know that in my case my tools are the best I can get, which is why I try to get the best tools I can.

This arrow-head shaped tool is extremely handy to create “hand grabs” (for an armor vehicle, an aircraft canopy, or maybe a ship ladder) which will all have the same size and dimension. This tool might find uses in trains and maybe for hydraulic lines in an aircraft, or for internal wiring inside an AFV or a car.

The tool has 28 pre-set lengths, or notches, so you only need to choose which one to use and then simply bend the piece of wire or photo etch to the length you need.

Simply brilliant design. Every single handle will have the same size.

I would recommend this tool for modelers who work with photo etch or scratchbuild parts.

I want to thank UMM-USA and IPMS/USA for the review sample.

Review Author
Jeffrey Brown
Published on
May 20, 2013
Company
MiniArt
Scale
1/35
MSRP
$35.99

This review is for the 1/35 MiniArt Ardennes Street, which is a road section with a damaged building and a small culvert.

As with most of these MiniArt kits you get extras, and these are worth it too. There is a full door, some window panes and some window shutters plus a rail fence. The culvert is really neat too, and I plan to dress mine up with a small piece of pipe, and some trickling water.

The building is not difficult to build, but it does need some reinforcement in the form of styrene stripes. As you can see in the photo, it helps the building stay together, and it provides a place for the putty later on. I have built three of these MiniArt 1/35 buildings, and while I do like them my main pet peeve is that they don’t have much surface for glue to grab onto. However, as you can see from my previous two reviews, once the putty work is done and once they are painted they do look nice.

Review Author
Eric Christianson
Published on
April 25, 2013
Company
Plusmodel
MSRP
$3.40

Plusmodel from Czechoslovakia continues to add to its list of quality aftermarket and modeling supply products, this time with a package of two 0.4mm styrene sheets. The bright white sheets of plastic measure 110x190mm (about 7.5 by 4 inches – the size of a small notepad) and the 0.4mm thickness converts to about 16 thousandths of an inch (0.016).

The cards are a handy size and cut/scribe/snap easily for use in scratchbuilding and just about any other way you can think of using them. I personally find them the perfect thickness for creating support tabs for assembling those new heavy vacuform diorama bases being produced.

I recommend this Plusmodel product for any modeler who needs to use styrene sheet for his hobby.

I would like to thank Plusmodel for providing the sheets for review and IPMS USA for giving me the opportunity to try them.

Review Author
Eric Christianson
Published on
January 2, 2013
Company
Xuron Corporation
MSRP
$23.99

Xuron has released another pair of high-quality clippers from their line of consumer products used by modelers. The extra-long, ultra-sharp tips cut through PE like butter without bending or twisting it. The ergonomically shaped handles offer superb control and stability, as well as comfort. A return spring brings the tool back to the open position after each cut.

First and foremost, these are scissors, not clippers. The shearing point comes mid-way between the two blades, just like a pair of scissors. What this means is that they are excellent at cutting PE parts off the sprues, but they do not cut them flush against one edge, as Xuron’s excellent sprue cutters do with plastic. I was hoping that the company had come up with a way for me to snip off PE parts without having to sand the edges where the tiny metal nubs might remain, but that's just personal preference on my part.

Review Author
Ed Kinney
Published on
December 27, 2012
Company
Alclad II
MSRP
$69.99
  • Accurate airbrush ( ALC 9200 ) $ 69.99
  • Precise airbrush ( ALC 9220 ) $ 79.99

Alclad II has brought to market two styles of airbrushes manufactured by one of the well known airbrush suppliers. The brushes bear the Alclad II trademark. There are two models available, both single action with internal mix. These are offered as complete sets that include the following:

  • Airbrush
  • Braided Hose
  • Flush-mount color cup
  • Adapter for bottles of Alclad II 1 oz bottles**
  • Protective cap for airbrush nozzle

**This is a major time saver in that all that is necessary is to shake the color to be applied, screw on the adaptor cap, and spray. (All Alclad II products are pre-thinned and ready to spray.) Easy cleanup as well by simply shooting lacquer thinner through the brushes.

Review Author
Michael Scott
Published on
December 19, 2012
Company
Xuron Corporation
MSRP
$22.95

Xuron Corporation makes a number of hand tools useful for modelers. One, the Professional Sprue Cutter, is the subject of this review.

Often, sprue cutters (diagonal cutting pliers) are hard on plastic parts, especially small ones, when removing them from their sprues. The compression forces they impart can damage small parts, especially when cutting the first of two or more sprue connections.

These Professional Sprue Cutters are designed to shear, rather than compress (or pinch) the plastic, reducing the compression force. Xuron calls this a Micro-Shear®. To quote Xuron, “Shear cutting reduces cutting effort (as compared to traditional compression cutting) and extends blade life because the sharp edges are not meeting edge-to-edge. Shear cutting also produces clean, flat cuts.”

Review Author
Roger Rasor
Published on
September 19, 2012
Company
Hasegawa
MSRP
$31.00

From time to time, Hasegawa blesses us with a new high quality tool that seems like just the thing that model builders need to make their tasks a bit easier. The most recent item in Hasegawa’s Trytool line is exactly that. It is a set of precision stainless steel tweezers with a pair of small flat tips that should hold anything firmly during parts assembly or painting.

Review Author
Dick Montgomery
Published on
September 9, 2012
Company
Hasegawa
MSRP
$30.00

There are many tools on the market, and Hasegawa offers a wide variety of those that many modelers have on their workbench. This review looks at two such items, Cutting Template A and Cutting Template B.

Review Author
Rick Bellanger
Published on
August 28, 2012
Company
UMM-USA
MSRP
$12.99

I have used many sprue cutters from a lot of different companies, all with different designs, for many years, and this is the first time I have tried this design. I was a little skeptical at first, but these have turned out to be quite nice.

The tweezer design is nice and easy to hold. The ergonomic design makes them very user-friendly. I love the way the head is shaped, the extension of the cutting head making it easy to fit into tight spots. The cutting heads are very sharp, so beware.

As for using, just put the head against the part you want to cut off and squeeze. You get a nice clean cut with very little cleanup afterwards. This works great for small parts. When it comes to the larger ones, you really have to squeeze, and I mean squeeze, hard. I had to resort to my other cutters for these.