James Binder
Reviews By Author
Atlas ICBMPublished: February 3, 2020 Horizon Models of Australia has released their third kit, the Atlas ICBM in 1/72 scale. This comes after kits of the Mercury Space Capsule and Mercury-Atlas rocket both in 1/72. If you have built either of those then you know you how good Horizons kits are and if not the following review will show you. The kit is made up of 3 sprues of gray plastic. Two of sprue A and one B. The… more |
|
Nazi MoonbasePublished: June 11, 2016 The year is 1947, Operation High Jump is under way and will become a disaster. Admiral Byrd says it was due to weather and conditions in the Antarctic, but was it really? Could an attack by Nazi UFO craft have damaged and destroyed the High Jump fleet and aircraft? Did this cause the Nazi’s to then leave for an even more remote location to regroup and plan their ultimate revenge against the… more |
|
Avro Shackleton MR.2Published: January 23, 2021 Airfix has been steadily updating its catalogue of 1/72 aircraft. One of their newest is the Avro Shackleton MR.2. This kit is a doozy! You will never have to look back at the old mold Shackleton kit again. Airfix gives you the choice of building either the early version with top turret or the late version with added antennas and turret removed. It also comes with a full interior with… more |
|
Strumpanzer Ausf.l Als Befehlspanzer with ZimmeritPublished: February 3, 2020 The Strumpanzer Ausf.L als Befehlspanzer was a command and control infantry support motorized gun based off the Panzer IV chassis. It was used at the Battles of Kursk, Anzio, Normandy, and was deployed in the Warsaw Uprising. It was known by the nickname Brummbär by allied intelligence but a name which was not used by the Germans. Just over 300 vehicles were built and they were assigned to… more |
|
Boulton Paul DefiantPublished: August 29, 2015 Airfix. The name may have sent shudders down your spine and given you nightmares of bad fit, no cockpit, bad decals, and overly thick canopies, but fear no more. Airfix has jumped into the 21st century and has come out swinging with beautiful new kits. They are accurate in size and shape due to laser scanned 3d modeling of actual subjects. The plastic is soft but in a good way. Liquid and tube… more |
|
Mig15 Control SurfacesPublished: May 31, 2015 The AIRES 1/72 Mig-15 control surfaces aftermarket set gives you elevators and horizontal stabilizers for the Eduard 1/72 Mig-15 kit. The four piece set replaces the two single piece horizontal stabilizers and elevators. The difference is that with the AIRES parts you get separate elevators so you can position them. When I compared the kit parts to the aftermarket parts the resin parts were a… more |
|
MiG-15bis Engine SetPublished: May 27, 2015 The AIRES Mig-15bis engine replacement is a model kit in and of itself. It replaces the 3 part “engine” of the Eduard 1/72 kit. The AIRES kit is made up of 30 resin and 19 photo etch parts. The kit gives you a complete Klimov K-1 engine! The resin is fantastic with great detail and is very easy to remove from the pour plugs. The photo etch is very fine but has strength, so it doesn’t feel… more |
|
Focke Achgelis Fa 330Published: June 22, 2021 The Focke-Achgelis Fa330 was was a type of rotary-wing kite, known as a gyroglider or rotor kite. They were towed behind German U-boats during World War II to allow a lookout to see farther. Despite its advantages, the use of the FA 330 only resulted in a single sinking when U-177 used one to spot, intercept, and sink the Greek steamer Efthalia Mari on 6 August 1943. The Allies came… more |
|
FW-190A Night FighterPublished: December 16, 2014 This kit is a new Profipack boxing of the venerable 1/48 scale Eduard FW 190A series, this time in its Nachtjager guise. It was my first foray into the Eduard FW 190 and I was blissfully unaware of the quirks of this kit. I started working on this kit during a build night at my Local Plastic Model Club and two other members warned me as to what I had gotten myself into. As the build went on I… more |
|
Flower Class Corvette SpiraeaPublished: September 22, 2014 This kit comes to us from Mirage Models out of Poland and is the third boxing of this type of ship, the other two kits in the series being the HMS Anchusa and the HMS Zinnia. The kit itself is molded in a medium gray and consists of three sprues marked A,B,E (more on this in the review). The sprue connection points are a bit thicker than on a Revell or Tamyia kit, but are fairly easy to cut… more |